Laser is an acronym for “Light Amplification by the Stimulated Emission of Radiation.” This technology produces a sharply focused beam of hot light that melts a very small area of metal and can be used to join similar or dissimilar alloys. The laser welding process can be performed quickly (normally in milliseconds) and does not scar or blemish the welding surface. In fact, by adjusting the laser’s beam diameter, a smooth, near polished finish can be achieved with the laser welder. Since very little heat is generated at the weld point, users can easily weld 0.10mm away from the most complicated and intricate machined patterns, polished surfaces and removable component assemblies.
The resulting damage is a different than the initial damage.For example, if water damage resulting from a broken pipe, or appliance is listed in your wording as covered, then you may be compensated for a portion of the damages caused even though the deteriorated pipe replacement or a new appliance would not be covered. This is an example the cause of the damage not being covered, but the resulting damage being covered.
Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?

5 stars to the team at Allied. Geronimo and his partner saved the day when they came to my home after a severe leak had damaged my closet and bedroom. They acted quickly and professionally to dry the rooms out and prepare them for being restored. I was so pleased and relieved to work with this team. This includes the professionalism of Misty who took my initial call. She knew how stressed I was and was right there to help me with a plan of action – all leading to a great result! Thanks so much! Sarah in Santa Rosa
Any mold professional should be able to explain your mold removal project in plain English.  If a contractor is unable to explain the basic processes and steps of mold remediation and mold removal in layman’s terms, be very wary!  If someone tries to complicate and confuse you about the process and scare you into hiring them, walk away and say, “Thanks, but no thanks.”
While the mold was still being disassembled, two “cleaners” began pulling tooling out of plates and putting them into buckets in preparation for a good scrubbing—and I mean a scrubbing. Immersing the buckets into a solvent tank, they used their hands like wire whisks as they swished the close-tolerance ejector sleeves around, effectively removing any trace of vent residue or “track” marks on the tooling—and in the process maybe adding some marks of their own.

The electrical systems in modern cars are particularly prone to flood water damage. Engine control computers, vehicle sensors, infotainment systems, and other electronic devices – along with wiring harnesses and the many connectors that join them together – can be very difficult to salvage. Unless every part is thoroughly cleaned and dried, inside and out, problems caused by corrosion can crop up weeks or even months after the flooding.
Mark the damaged drywall with a pencil after you determine the area of drywall you want to remove. Use a straightedge to mark lines vertically and horizontally on the face of the drywall. Whenever possible, have the lines fall over the centers of the framing members behind the drywall; this will provide backing and a fastening surface for the drywall patch.
Gone were helpful clues for the repair technicians who had yet to begin troubleshooting and analyzing mold performance and wear. So now, how will the repair techs determine if the 63-day production run was too long? Or whether the leader pins, bushings, and interlocks were greased properly during the run? And how will they know if all the swishing during cleaning did not create any “dings” in the sleeves that could be blamed on something else instead of poor cleaning practices? Other questions will remain unanswered, too: Does the mold still have excess vent residue in the top right quadrant? Were all the ejector sleeves numbered and in the proper mold position before they were removed?

There are also several classes of water damage. The class of damage is important when assessing water damage repair options. Class 1 is the least harmful form of damage. Materials absorb very little of the water from this type of damage. Water damage repair is the easiest in this type of situation. Class 2 has a fast rate of evaporation, which means that carpets and cushions may be damaged. Water damage repair is more difficult when it involves class 2 damage. Class 3 has the fastest rate of evaporation. In this case, the water may come from broken sprinklers or other overhead sources, soaking the walls and furniture. Class 4 requires special water restoration and water removal procedures. This type of damage may affect hardwood floors, plaster, and concrete.

Laser is an acronym for “Light Amplification by the Stimulated Emission of Radiation.” This technology produces a sharply focused beam of hot light that melts a very small area of metal and can be used to join similar or dissimilar alloys. The laser welding process can be performed quickly (normally in milliseconds) and does not scar or blemish the welding surface. In fact, by adjusting the laser’s beam diameter, a smooth, near polished finish can be achieved with the laser welder. Since very little heat is generated at the weld point, users can easily weld 0.10mm away from the most complicated and intricate machined patterns, polished surfaces and removable component assemblies.
During the walkthrough, compile a list of flooded equipment to help you estimate man-power requirements and create a preliminary schedule of repair work. As mobilization of crews begins, start developing job strategies, such as finding office space, living accommodations, and transportation for crews. You must also think about arranging food/catering services and developing work schedules. Once your crews have been mobilized and job-site safety requirements are met (see SIDEBAR: Developing a Safety Plan Following a Natural Disaster), it's time to go to work.

When left to sit for long periods of time, especially if the homeowners temporarily relocate while recovering from a house fire, further structural damage can complicate matters—making it difficult to return life back to normal. Calling in a water damage repair company is an excellent preventative measure for reducing the risk of further problems and headaches.


Water damage is one of the most common causes of home insurance claims. According to ISO, Water damage claims are the second largest frequent insurance claim, following wind and hail damage. The percentage of claims due to water damage is also increasing, while other causes of damage have stayed fairly consistent or even decreased. It's no wonder people have a lot of questions about water damage and what is covered on home insurance, and why things, like "gradual damage" are not covered. Things get even more complicated when we look at the exceptions.
The methods for dealing with damage to walls depend on the type of materials and also what’s behind those materials. Drywall can often be salvaged, when you respond quickly to damage. You can purchase moisture meters that allow you to assess structural integrity. If the integrity checks out then your drying approach will depend on wall contents. If the wall has insulation, you will need to use flood cuts. If there is no insulation, then usually the best method is to create weep holes. And if you’re dealing with a firewall, you’ll want to use staggered cuts.
×