The insurance company must start investigating your claim within 15 days after receiving written notice and may ask you for more information. Once you send the information, the insurance company has 15 business days to accept or reject your claim. If the insurance company says it will pay your claim, it must pay within five business days. If the insurance company rejects your claim, it must explain its reasons in writing.
After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.
You can easily spot the most visible type of mold, called mildew, which begins as tiny, usually black spots but often grows into larger colonies. It’s the black stuff you see in the grout lines in your shower, on damp walls, and outdoors on the surfaces of deck boards and painted siding, especially in damp and shady areas. A mildewed surface is often difficult to distinguish from a dirty one. To test for mildew, simply dab a few drops of household bleach on the blackened area. If it lightens after one to two minutes, you have mildew. If the area remains dark, you probably have dirt.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise. It is for information purposes only. Currently, the following states regulate the offer and sale of franchises: California, Hawaii, Illinois, Indiana, Maryland, Michigan, Minnesota, New York, North Dakota, Oregon, Rhode Island, South Dakota, Virginia, Washington, and Wisconsin. If you are a resident of or want to locate a franchise in one of these states, we will not offer you a franchise unless and until we have complied with applicable pre-sale registration and disclosure requirements in your state.
When left to sit for long periods of time, especially if the homeowners temporarily relocate while recovering from a house fire, further structural damage can complicate matters—making it difficult to return life back to normal. Calling in a water damage repair company is an excellent preventative measure for reducing the risk of further problems and headaches.
Cut through the paper facing of the drywall sheet with a razor knife. Cut along the drawn lines. Break the drywall along the face cut, and fold the drywall slightly to make a crease in the paper backing of the drywall sheet. Cut through the crease in the backing paper with a razor knife from the backside of the drywall sheet, and remove the unwanted portion of drywall. To make cuts that are perpendicular to each other, use a keyhole saw for the shorter of the two cuts, and then fold and cut the drywall.
The methods for dealing with damage to walls depend on the type of materials and also what’s behind those materials. Drywall can often be salvaged, when you respond quickly to damage. You can purchase moisture meters that allow you to assess structural integrity. If the integrity checks out then your drying approach will depend on wall contents. If the wall has insulation, you will need to use flood cuts. If there is no insulation, then usually the best method is to create weep holes. And if you’re dealing with a firewall, you’ll want to use staggered cuts.
We offer structural drying, as after the immediate water emergency has been resolved with damage restoration, your house and its contents still need to be thoroughly dried out. We have specialized equipment that is able to get this done in as short a time as possible, and with minimal disruption. Our commercial-grade water extractors will get your carpet and other flooring back to nearly 100% dry condition. We also use high-speed blowers to circulate air at high volumes throughout the house in order to facilitate the drying process.
Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading.
Many parts of a car are challenging to clean and dry because they are hard to access. Door locks, window regulators, power seat motors, heating and air conditioning components, and many small parts are tucked away in enclosed areas or up under the dash. These items may work okay immediately following a flood, only to fail later due to contamination by dirty water.
After this type of catastrophic event, it's typically best to replace certain types of equipment rather than try to recover items such as receptacles, light switches, start-stop stations, fire alarm panels, and metering equipment. Your crews must also drain all the conduits by opening up the conduit covers and letting gravity drain out all water and debris.
Most insurance policies will pay to remove mold only if it must be removed to repair or replace property that was damaged by a covered peril. You must report water damage that was hidden from view within 30 days of the date you first noticed it. Some companies provide a limited amount of mold remediation coverage, and other companies will allow you to buy additional coverage for mold remediation by endorsement.
It is important to hire one of these water damage restoration companies as soon as possible after water damage occurs. Moisture promotes the growth of mold and other organisms, increasing the risk for serious health problems. Mold exposure may aggravate allergy and asthma symptoms, especially in children and people with compromised immune systems. Exposure may also increase the risk for respiratory diseases and other medical problems. Cleaning up immediately can help mitigate the health effects of water damage on everyone in a home or commercial space.
A dark, damp crawl space allows mold to flourish, which can then cause structural damage. Moisture dripping through the concrete foundation of your home can cause basement leaks. Air leakage into the section between the attic and the home can cause moisture on the underside of the roof, which can lead to mold and rotting. Check your home periodically, and look for light fixtures that are look as well as the overall quality of any noticeable piping.
Richard Covert, FLOWER MOUND, TX, Nov 17th, 2014: What a great group of professionals! Everyone was great to work with, accommodating, understanding, sympathetic but focused on getting the mess cleaned up and getting the property ready to be put back together. What a miserable thing to have happen but thankfully there are professionals like these to help you through it.
You should expect a fully trained Hillsboro water damage repair technician at the door who’s ready to begin to work immediately after a thorough inspection of the problem. Having our own fleet and equipment, allows us to get the water damage cleanup done faster than many other companies. Our business success depends upon restoring your life back to normal regardless of the Hillsboro water damage and the mess it caused. This is our passion and our clients will tell you so. Our professional staff is working 24/7 to make sure your call is answered by a real person. Give us a call at any time, day or night.
Category 3 Water - Known as "black water" and is grossly unsanitary. This water contains unsanitary agents, harmful bacteria and fungi, causing severe discomfort or sickness. Type 3 category are contaminated water sources that affect the indoor environment. This category includes water sources from sewage, seawater, rising water from rivers or streams, ground surface water or standing water. Category 2 Water or Grey Water that is not promptly removed from the structure and or have remained stagnant may be re classified as Category 3 Water. Toilet back flows that originates from beyond the toilet trap is considered black water contamination regardless of visible content or color.