Unless you’re doing laundry, you probably don’t think twice about your washing machine. But if it breaks down, the results could be catastrophic. For example, if the supply hose is damaged or has a faulty connection to the wall or washing machine, more than 600 gallons of water could potentially spill out within an hour. That could lead to significant water damage, especially if your washing machine is located on the second floor of your home.
Heavy rain, rapidly melting snow, rising rivers, and breaches in levees or dikes can cause vehicle flood damage and the need for difficult and expensive auto repairs. Once floodwaters rise above the vehicle door openings, extensive disassembly may be required for cleaning. To avoid causing additional problems, never attempt to start a flood-damaged car until a thorough vehicle inspection has been performed by a qualified technician.
Flooding in a home can lead to more problems than just water damage and health issues, it can also cause rusted pipes and mold growth.  We use water detection probes and sensors to find these hidden flood damage problems so that we can repair them as part of the restoration process.  You can be confident that our flood damage restoration experts will be thorough and complete and if you made an insurance claim, we can help you coordinate the payment with your insurance provider.

After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.
If you’re dealing with anything other than a large incursion, you understandably may be considering handling the cleanup and drying yourself to save money or time. The problem is that cleaning up and recovering from water damage isn’t always as straightforward as it seems. This post highlights 3 key things you need to be aware of when addressing water damage from a minor clean water (or Category 1) incursion.

Air movers help to ventilate the affected area, circulate air so that the moisture can be extracted by dehumidifiers and dry damp materials such as drywall and floors. There are a number of different types of restoration air movers and the best choice for you will depend on the planned application of the equipment. The ideal equipment should have the perfect balance of horse power and amp draw. 


To further ensure a safe and effective environmental remediation, our crews are rigorously trained in mold removal procedures approved by the Indoor Air Quality Association (IAQA); Institute of Inspection, Cleaning and Restoration Certification (IICRC);  the Restoration Industry Association (RIA); and our own in-house trainers. In addition, all of our superintendents, operations managers, project managers, project directors and regional managers  hold Certified Mold Remediation (CMR) certifications.

The longer water damage sits untreated, the more likely it is that additional damage can occur. If it’s determined that drying equipment is needed, dehumidifiers will often be placed in the home to prevent against further damage like mold growth while the vendor is waiting for approval from the insurance company, if one is involved. Dehumidifiers can be present for one or multiple nights depending on factors such as the length of time the water has been present and the source of the leak. The contractor working on your home will be able to assess how long the dehumidifiers are needed.


Once you get the OK from your insurer to remove the water, use a sump pump, available from most hardware or home supply stores for $150 to $500, and a wet vac ($40 to $130). Ramirez cautions that water is heavy—a cubic foot weight 10 lbs.—so be careful not to injure yourself, especially if you’re carrying buckets of water up and down stairs. Open doors and windows to allow fresh air to circulate so long as that won’t allow in more water. 

One of the simplest proactive steps is getting an annual plumbing inspection. These are often free or free with other services. The plumber will inspect all visible plumbing including fixtures, pipes, appliances, and drains. They diagnose and fix small problems before they become big ones. They can also tell you the best time to replace worn fixtures and appliances.
After a mold has been cleaned, repaired, changed over, and final-checked, it needs to be given a new status and moved to one of three areas—typically racked in holding/storage area, reset in the press, or staged as a back-up mold in a molding-cell operation. It could also go to an outside vender for rebuild or production. You should know where your molds are.
Gradual damage is when something happens slowly over time and causes damage to your property. Gradual damage due to water damage is a common problem when it comes to insurance claims. An example of gradual damage is when something happens slowly, like paint chipping off a wall it starts with a small chip, then eventually half the wall is uncovered.
It is important to hire one of these water damage restoration companies as soon as possible after water damage occurs. Moisture promotes the growth of mold and other organisms, increasing the risk for serious health problems. Mold exposure may aggravate allergy and asthma symptoms, especially in children and people with compromised immune systems. Exposure may also increase the risk for respiratory diseases and other medical problems. Cleaning up immediately can help mitigate the health effects of water damage on everyone in a home or commercial space.
Once help arrives, the first thing a water mitigation contractor will do is inspect the home and evaluate the damage. In order to properly evaluate the damage, they have special tools and instruments they use to measure the moisture content of the home. To do this, they either poke or rest the instruments on top of surfaces like floors, baseboards and ceilings in the damaged rooms to get an accurate reading. Depending on the moisture content readings and Institution of Inspection Cleaning and Restoration Certification (IICRC) dry standards for the state you live in, your contractor will assess if drying equipment is needed.
Working with insurance companies to cover your water damage repair can be a tiring and frustrating process. You need to be aware of the specifics in your insurance policy. Most companies require you to report and repair water damage in a timely manner in order to cover the costs. At Peniel, we have years of experience working with billing insurance companies. We are happy to be an advocate for you during this trying process.
On average, it costs around $2,300 for mold removal. Mold spores are found in almost all environments and begin growing in just 24 to 48 hours when moisture is present. All types of water damage come with a risk of fungal growth. The longer moisture sits, the greater the risk and cost of removal. Only a qualified inspector should test for mold. An inspector can help determine if there is any and if professional remediation is needed.
The resulting damage is a different than the initial damage.For example, if water damage resulting from a broken pipe, or appliance is listed in your wording as covered, then you may be compensated for a portion of the damages caused even though the deteriorated pipe replacement or a new appliance would not be covered. This is an example the cause of the damage not being covered, but the resulting damage being covered.
Many parts of a car are challenging to clean and dry because they are hard to access. Door locks, window regulators, power seat motors, heating and air conditioning components, and many small parts are tucked away in enclosed areas or up under the dash. These items may work okay immediately following a flood, only to fail later due to contamination by dirty water.
You should expect a fully trained Hillsboro water damage repair technician at the door who’s ready to begin to work immediately after a thorough inspection of the problem. Having our own fleet and equipment, allows us to get the water damage cleanup done faster than many other companies. Our business success depends upon restoring your life back to normal regardless of the Hillsboro water damage and the mess it caused. This is our passion and our clients will tell you so. Our professional staff is working 24/7 to make sure your call is answered by a real person. Give us a call at any time, day or night.
The insurance company will pay to repair your home with materials of like kind and quality to the original. For example, if the carpet was damaged, the insurance company will pay to replace the damaged carpet with carpet of a similar grade and quality. If you choose to upgrade the carpet or change the type of flooring, you will have to pay the extra costs yourself.
To further ensure a safe and effective environmental remediation, our crews are rigorously trained in mold removal procedures approved by the Indoor Air Quality Association (IAQA); Institute of Inspection, Cleaning and Restoration Certification (IICRC);  the Restoration Industry Association (RIA); and our own in-house trainers. In addition, all of our superintendents, operations managers, project managers, project directors and regional managers  hold Certified Mold Remediation (CMR) certifications.
If your home or business is flooded, make sure to call a flood damage cleanup professional immediately.  The water damage will continue to spread the longer you do not take action and there is a good chance that the flood water contains sewage which can contribute to health problems.  Call us at 1-888-915-8868 or use the form on the right of the page to locate a flood damage restoration expert near you.

From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
Though not the most common precipitator of water damage repair in the NH, storm flooding can cause serious short term and long-term problems to your residential or commercial property. The likelihood of flood-water damage to your property is rising, and property owners need to be prepared to deal with this very real possibility.  Flooding from seasonal storms is more common than you’d think, and the problems that arise from it need to be addressed as quickly as possible.
If you can already see it, you usually do NOT need to spend money on pre-testing mold. Plain and simple: you just need to remove it. Since no visible mold growth belongs in a healthy home (no matter what the type) and all mold should be removed the same way, there is usually no need to identify what types and concentrations of mold you have via testing.
The average homeowner spends $7.00 per square foot for professional cleanup. That does not include the amounts for repairing and replacing items. Typically, anything that can absorb the contaminants in black water should be replaced, including upholstered furniture, beds, carpets, clothing, and all permeable building materials. Replacement is often more cost effective than restoration.
We offer mold prevention services, as any place in your home that has constant moisture is susceptible to mold growth. Mold is often detected by smell, but the problem of mold goes far beyond the odor it creates. Mold creates an unhealthy environment, and many people have severe allergic reactions when they are in the presence of mold or mildew. Any mold that is in your home now must be completely eliminated. More importantly, we can also remove the source of the moisture that allows the mold to begin thriving in the first place. It does no good to get rid of the mold if the conditions remain that allow it to grow again. We can do a thorough assessment of your home and advise you on the best course of action.
A dark, damp crawl space allows mold to flourish, which can then cause structural damage. Moisture dripping through the concrete foundation of your home can cause basement leaks. Air leakage into the section between the attic and the home can cause moisture on the underside of the roof, which can lead to mold and rotting. Check your home periodically, and look for light fixtures that are look as well as the overall quality of any noticeable piping.
If the flood was serious enough for you to leave your home, be sure you stay safe upon your return. The Federal Emergency Management Agency warns that you should check for any visible structural damage, such as warping, loosened or cracked foundation elements, cracks, and holes before entering the home and contact utility companies if you suspect damage to water, gas, electric, and sewer lines.  

Ceilings exposed to water damage are more at risk due to gravity: You don’t want them sagging or collapsing. So, remove affected ceiling panels or boards first. If the ceiling leak is caused by a roof problem, it’s important to find the true source of the leak, which may be somewhere far removed from the water stain. And take this time to make sure the water caused no structural damage to beams or rafters. You can contact professionals to find out what replacing a water damaged ceiling repair cost job runs.
When a disaster of this magnitude occurs, the first things a plant will need are lighting and pumps. This requires the use of on-site generators and temporary power connections. It's highly recommended to not allow the plant distribution system to be back-fed. If a motor is required to turn a pump, a portable motor starter fed by the generator should be installed on a temporary panel next to the motor.
No type of flood damage, no matter the source of the water, is covered by standard homeowners policies. Flooding, for example, can occur from storms, over-saturated ground, overflowing or surging bodies of water such as rivers, ponds, lakes and oceans. You may be able to purchase a separate flood insurance policy through the National Flood Insurance Program.
Indoor and outdoor pipes and faucets. Routinely check indoor pipes under cabinets and sinks for leaks, rust, and any signs of deterioration. Minimize the potential for water damage from frozen and broken outdoor pipes by insulating supply lines (in attics, crawlspaces, and exterior walls), protecting exposed outdoor faucets, sealing gaps in exterior walls, and maintaining adequate heat in your home.
After a sketch is made of the piece of equipment, add the equipment to a detailed electrical equipment tracking sheet, which should include general information such as the item number, sequence number, priority, area of the plant, power center or room number, transformer, substation, cell position, equipment type, circuit identification, plant identification number, manufacturer, percent water level, model number, frame size, and voltage. After completing these procedures on all the equipment associated with a power center or a piece of gear, the QA/QC leader must review the documentation for accuracy. Once the documentation has been approved, the equipment is ready for removal.
Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.
BRAVO – job well done! Discovered a flood at home in San Francisco – water had been over flowing a 2nd floor sink for 15 hours. Contacted Allied, signed work order on line and workers were at the house within 15 minutes. They brought a truck load of equipment to mitigate the damage. Drying fans were installed, heating pads were placed on hardwood floors, walls and ceilings were opened and drying and dehumidifying tubes installed. Excellent, professional care. Very pleased with their swift delivery of emergency service AND their attention to detail to ensure the water damage was dried out completely.
This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise. It is for information purposes only. Currently, the following states regulate the offer and sale of franchises: California, Hawaii, Illinois, Indiana, Maryland, Michigan, Minnesota, New York, North Dakota, Oregon, Rhode Island, South Dakota, Virginia, Washington, and Wisconsin. If you are a resident of or want to locate a franchise in one of these states, we will not offer you a franchise unless and until we have complied with applicable pre-sale registration and disclosure requirements in your state.
When left to sit for long periods of time, especially if the homeowners temporarily relocate while recovering from a house fire, further structural damage can complicate matters—making it difficult to return life back to normal. Calling in a water damage repair company is an excellent preventative measure for reducing the risk of further problems and headaches.
Our technicians are certified by the Institute of Inspection, Cleaning and Restoration Certification (IICRC), which is the hallmark of professional knowledge in the cleaning and restoration industry. You will be able to tell the difference: Rainbow International emergency water damage crews use state-of-the-art equipment and we employ Rapid Structural Drying techniques to dry your structure as quickly and completely as possible.
Since you should notify your insurer soon as possible after the flood, it’s a good idea to keep your insurance company and local agent’s phone number in your always-ready emergency bag. (Note that the NFIP works through private insurance companies, so you contact your insurer just as you would for any other type of claim). In cases where a flood has affected a region or community, your agent may be busy handling his or her own flood issues. In that case, contact the insurance company’s headquarters. 

Water is pumped out of your home or property to our recovery tank mounted inside our truck, ready for proper disposal. Standing water is removed, allowing our water extraction team inside your property to assess damage to all structures, furniture, and personal items, inspect your property to traces of mold, and to set up equipment designed to quickly dry the property.


No need to take a wrecking ball to the entire house at the sight of a little mold.  You can keep the price down by focusing just on the area where there is visible mold.  For example, mold on drywall in one corner of the room only needs cut out and replaced in that corner.  Yes, the rest of the room (and maybe adjoining rooms) should be cleaned, but only damaged drywall needs to be cut out and replaced.
AlabamaFloridaKentuckyMississippiNew MexicoPennsylvaniaVermontArizonaGeorgiaLouisianaMissouriNew YorkRhode IslandVirginiaCaliforniaIdahoMaineMontanaNorth CarolinaSouth CarolinaWashingtonColoradoIllinoisMarylandNebraskaNorth DakotaSouth DakotaWest VirginiaConnecticutIndianaMassachusettsNevadaOhioTennesseeWisconsinDelawareIowaMichiganNew HampshireOklahomaTexasWyomingDistrict of ColumbiaKansasMinnesotaNew JerseyOregonUtah
Roofs. Keep roofs free of debris that can damage roofing and allow water to seep in. Trim tree branches to prevent them from rubbing and damaging the roof. Repair missing or damaged shingles. Properly seal any cracks around chimneys, skylights, and vents. Check metal flashing for holes, cracks, or other damage. Replace flashing or use silicone caulk to seal any openings.
In addition, it’s important to have a working flashlight and turn off all water and electrical sources within the home, says Dr. Maurice A. Ramirez, author of “The Complete Idiot’s Guide to Disaster Preparedness.” Even if the power isn’t operational, it’s a good idea to go to your fuse box and turn off the main, plus all of the individual fuse connections. That way, if the power is reactivated, you’re not at risk for mixing standing water and electricity.
Expert Rytech technicians will apply state-of-the-art drying process techniques to your property and issue a full written report to Olympus upon completion. Rytech gives you the added security and assurance of specialists who carry visible identification, arrive in clearly marked Rytech vehicles, and wear protective footwear to avoid soiling undamaged areas of your property.

Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.

If you have to remove mold concentrations or perform any black mold removal covering more than a few square feet, where the musty odor is strong or where you find extensive water damage, we recommend that you take special precautions. You want to not only avoid contaminating the rest of the house but also protect yourself from breathing high concentrations of spores and VOCs.

Flooding in a home can lead to more problems than just water damage and health issues, it can also cause rusted pipes and mold growth.  We use water detection probes and sensors to find these hidden flood damage problems so that we can repair them as part of the restoration process.  You can be confident that our flood damage restoration experts will be thorough and complete and if you made an insurance claim, we can help you coordinate the payment with your insurance provider.
Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?
Drying - We determine the amount and type of drying equipment needed. Typically, we install a combination of drying fans, dehumidifiers, and negative air machines. We examine many factors (such as when the loss occurred, the magnitude of water damage, and size of the affected areas) to determine the best drying strategy to utilize as well as the quantity of equipment necessary. 
What do you do when you have a flood in your home? Call a company you can trust. Dalworth's water damage and restoration professionals are certified, bonded and insured for your security and peace of mind. Our experts understand the last thing you need is more stress when your home or business floods. Whether it's a water leak from a burst kitchen pipe or flooding from a natural disaster, contact Dalworth Restoration for your water damage restoration, water cleanup and removal or disaster cleanup services in your North Texas town.

Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?
Once you’ve pulled away wet materials and established holes or cuts in the wall as needed, you’ll typically need one air mover for every 15 – 25 square feet of floor, unless the moisture load and density is particularly high, then you may need more. To prevent mold, make sure all of the layers and materials are dry before putting everything back together.
×