Believe it or not, there are three types of water. The first type is “clean” water from rain, condensation, leaky pipes, and so on. It’s relatively harmless to clean it up yourself. But if you decide to seek outside help, it costs around $3.75 per square foot for basic water damage cleanup (replacements not included). The second type is gray water, slightly dirty water from dishwashers, washing machines, clean toilets, and so on. And it may have some contaminants. But you can clean it up yourself if you remove it carefully and with proper safety gear to protect yourself. Professional water damage cleanup cost rises to $4.50 per square foot.

Before any mold is released for production (“blue-tagged”), it is imperative to put the mold through a series of final-check bench procedures to verify “All Systems Go” and minimize any opportunities for the mold to be stopped and returned to the shop for something that should have been caught before it was released. Water leaks, heater problems, etc., can be avoided with a final-check procedure.
During the walkthrough, compile a list of flooded equipment to help you estimate man-power requirements and create a preliminary schedule of repair work. As mobilization of crews begins, start developing job strategies, such as finding office space, living accommodations, and transportation for crews. You must also think about arranging food/catering services and developing work schedules. Once your crews have been mobilized and job-site safety requirements are met (see SIDEBAR: Developing a Safety Plan Following a Natural Disaster), it's time to go to work.
HEPA air scrubbers remove contaminants from the air. This is an especially important piece of fire damage restoration equipment, as lingering soot particles can lead to health problems in a structure’s inhabitants after a fire. Commercial air scrubbers are also important in mold remediation when filtering mold spores from the contaminated environment. HEPA filtration ensures that even the smallest soot or mold particles are removed from the air.

If the flood was serious enough for you to leave your home, be sure you stay safe upon your return. The Federal Emergency Management Agency warns that you should check for any visible structural damage, such as warping, loosened or cracked foundation elements, cracks, and holes before entering the home and contact utility companies if you suspect damage to water, gas, electric, and sewer lines.  
Mildew is a surface type of mold that won’t damage your home’s structure. But other types of mold cause rot. Remove mildew from wood when you probe the suspect area with a screwdriver or other sharp tool (Photo 3). If the wood is soft or crumbles, the fungi have taken hold and rot has begun. We’ll show you how to remove mold from wood in a few steps.

The average homeowner spends $7.00 per square foot for professional cleanup. That does not include the amounts for repairing and replacing items. Typically, anything that can absorb the contaminants in black water should be replaced, including upholstered furniture, beds, carpets, clothing, and all permeable building materials. Replacement is often more cost effective than restoration.
Black water contains pathogenic agents and is grossly unsanitary. Anyone with a compromised immune system, respiratory problems, or allergies, as well as young children and the elderly must remain off the job site until the building is judged safe for occupancy. Black water includes sewage and other contaminated water sources entering or affecting the indoor environment, such as: toilet backflows, flooding from seawater, ground surface water, and rising river water. Category 3 water can contain contaminants such as pesticides, heavy metals, or toxic substances.
How much drywall should you replace if you have drywall water damage? Generally speaking, if drywall has swelled or sagged 3/8 of an inch or more from the baseline, then you need to replace the entire sheet. Otherwise, you can cut out and water damage repair the water-stained portion. And remember to check the insulation behind the drywall for damage as well.

Laser welding, combined with targeted material selection and hardness matching, results in a gate repair that surpasses what can be achieved with traditional methods that match the base material and the filler. The laser welding process permits the use of a wide range of dissimilar metals, allowing selection of a filler metal that will result in optimal performance. Laser welding can be used to combine many different materials, including P-20, Beryllium Copper (BeCu), Stainless Steel, S-7, H-13, and others. One of the most common marriages of materials is Stainless Steel to BeCu, which maintains the cooling properties of BeCu while adding a better wear surface in the Stainless Steel. For example, a 410 stainless steel filler can create a fine martensitic microstructure, delivering optimal wear without compromising the mold’s ability to withstand flexing during injection.

Mold is a major-league nuisance. It blackens the grout lines in your shower, discolors drywall, shows up as black spots on siding, darkens decks, and grows on and rots damp wood everywhere. Even worse, it can be bad for your health. Mold releases microscopic spores that cause allergic reactions, runny noses and sneezing, as well as irritating, even injurious, odors. We’ll cover how to remove mold, how to get rid of black mold, how to kill mold on wood and what kills mold in a few steps.
When a severe thunderstorm hits, the risk for property damage increases greatly as heavy rains can cause water damage as well as flooding in your home.  Flooding from storms is a major problem that requires a combination of methods to correctly treat it and protect your health.  Unlike typical water damage from a leaky roof or a burst pipe, flood damage often includes raw sewage that can complicate the remediation process.  As soon as flooding occurs in your home, make sure to call a flood damage cleanup expert to mitigate the damage and safely remove the flood water.

While you have no control over natural water-related disasters, you can take all the preventative measures possible ahead of time to minimize their effect on your home. Flash floods, sudden storms and hurricanes can all trigger water buildup. Prompt attention by contacting The Water Damage Experts as soon as you can after a weather-related issue will help lessen the time for water damage to occur.


Most insurance policies will pay to remove mold only if it must be removed to repair or replace property that was damaged by a covered peril. You must report water damage that was hidden from view within 30 days of the date you first noticed it. Some companies provide a limited amount of mold remediation coverage, and other companies will allow you to buy additional coverage for mold remediation by endorsement.
Sewage back‐ups, pipe leaks and breaks not only cause sewage damage, but result in dangerous conditions that require meticulous cleanup to ensure a return to a safe environment. That’s why WaterBear leads in industry standard guidelines and takes every precaution to contain contamination within exposed areas, then thoroughly cleans and decontaminates them. We work to return the areas to their original state – fresh, clean and safe.

Clean water that originated from a source that does not pose substantial harm to humans. Examples include: broken water supply lines, melting ice or snow, falling rainwater, broken toilet tanks, and toilet bowls that do not contain contaminants or additives. Clean water may deteriorate with time as it dissolves or mixes with soils and other contaminants.


Laser is an acronym for “Light Amplification by the Stimulated Emission of Radiation.” This technology produces a sharply focused beam of hot light that melts a very small area of metal and can be used to join similar or dissimilar alloys. The laser welding process can be performed quickly (normally in milliseconds) and does not scar or blemish the welding surface. In fact, by adjusting the laser’s beam diameter, a smooth, near polished finish can be achieved with the laser welder. Since very little heat is generated at the weld point, users can easily weld 0.10mm away from the most complicated and intricate machined patterns, polished surfaces and removable component assemblies.
Whatever the mess, whether you discovered flooding from a broken or leaky pipe, damage from frozen pipes, a sewer line break, a sink or toilet overflow, or a malfunctioning appliance like a water heater, washing machine, dishwasher or refrigerator in your home, or you’re a victim of storm damage, our Hillsboro flood damage technicians are equipped to handle any problem. WaterBear is here for all water cleanup and restore your home or business back to normal, quickly and right the first time. Acting fast against flood damage can increase the chance of salvaging usable materials, reducing costs, and saving time, so we guarantee a fast response and professional guidance to help you sort out the options, work with your insurance agent and get flood cleanup and restoration underway.
At WaterBear, our water damage Hillsboro specialists understand that a flood in your home or business is emotionally devastating. It takes up valuable time and wreaks havoc on your day-to-day activities. That’s why we offer the best in drying technology, equipment and training to get you back to the life you’re used to as quickly as possible. Our proprietary Dry-In-Place technology places us among the nation’s leaders in Water Damage Mitigation. From our years of experience we have learned that a quick response is the key to limiting damage and potential mold growth in any water damage situation. We strive to get your life back to the way you want it as quickly as possible.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
Hurricanes and river flooding are common natural causes, as are high water tables and improperly graded ground. Installing a sump pump and water alarm are sensible preventions in areas with high water tables. The sump pump will pump water from under the foundation to drain it away from the home and averages about $1,200 to install. The sump pump itself will cost between $50 to $400. Also, ground that slopes towards the basement of the home can lead to leakage in the basement and increased stress on sewage systems.
Any mold professional should be able to explain your mold removal project in plain English.  If a contractor is unable to explain the basic processes and steps of mold remediation and mold removal in layman’s terms, be very wary!  If someone tries to complicate and confuse you about the process and scare you into hiring them, walk away and say, “Thanks, but no thanks.”
Mr. Restore is a water damage restoration company that serves the Dallas area. We have more than 50 years of experience in restoration and reconstruction. We can be of assistance during stressful disaster situations. Our dedicated team is committed to handling every project with precision and care, as well as delivering the best customer service around. No matter what your emergency might be, whether it’s water damage as the result of leaking pipes, sink or toilet overflow, or broken appliances, our team is here for you to offer high-quality restoration services at affordable prices.
Mark the damaged drywall with a pencil after you determine the area of drywall you want to remove. Use a straightedge to mark lines vertically and horizontally on the face of the drywall. Whenever possible, have the lines fall over the centers of the framing members behind the drywall; this will provide backing and a fastening surface for the drywall patch.
Hurricanes and river flooding are common natural causes, as are high water tables and improperly graded ground. Installing a sump pump and water alarm are sensible preventions in areas with high water tables. The sump pump will pump water from under the foundation to drain it away from the home and averages about $1,200 to install. The sump pump itself will cost between $50 to $400. Also, ground that slopes towards the basement of the home can lead to leakage in the basement and increased stress on sewage systems.
Among the most common and most preventable causes of water damage are burst pipes. Burst pipes typically happen because of clogs and freezing. Prevent the damage by finding a family plumber to do annual inspections. Regular inspections and maintenance are a cost-effective, preventative measure. Installing new plumbing typically runs between $350 to $2,000.
Type depends on the source and extent to which it has affected the home. Sources can range from clean water from a burst pipe to black water from sewage backup. Cleanup ranges from $3.75 to $7.00 per square foot. Repairs range from $450 to $7,000. Again, these vary widely depending on the source and extent of damage, whether it's a flooded basement, leaky toilet, or damaged roof.
Also, a combination of moisture and humidity can cause mold to grow as well as any unrepaired water leaks. For instance, if the your air conditioning unit is set to a temperature that causes condensation on your windows then common sense should tell you that your windows may not be the only places with condensation or moisture. (between the walls) If there is already mold growing, these temperatures that cause condensation will only feed the mold to grow.
Appliance hoses. Broken hoses are among the most common causes of water damage. Regularly inspect hoses and hose fittings on washing machines, icemakers, and dishwashers for kinks, cracks, bulges, or deterioration. Replace standard rubber washing machine hoses every two to five years or more often if they are showing signs of wear. Consider using steel-reinforced hoses for longer life.
Working with insurance companies to cover your water damage repair can be a tiring and frustrating process. You need to be aware of the specifics in your insurance policy. Most companies require you to report and repair water damage in a timely manner in order to cover the costs. At Peniel, we have years of experience working with billing insurance companies. We are happy to be an advocate for you during this trying process.

Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?


Inspect the defects. To find the source of the defects, we perform a visual inspection as high as 24x magnification, use dye-penetrant inspection (DPI), or use fluorescent penetrant inspection (FPI). This allows us to find small pits, microscopic cracks and larger cracks in the gate. If these defects are not identified and repaired, more problems can arise for the gate and the mold.
If you have a replacement cost policy, most insurance companies pay claims with two checks. The insurance company will give you the first check after the adjuster has reviewed your damage. This check will be for the estimated cost of repairs, minus depreciation and your deductible. A deductible is the amount of the claim that you're responsible for paying yourself. Review your policy or ask your agent or adjuster if you don't know how much your deductible is.

If the flood was serious enough for you to leave your home, be sure you stay safe upon your return. The Federal Emergency Management Agency warns that you should check for any visible structural damage, such as warping, loosened or cracked foundation elements, cracks, and holes before entering the home and contact utility companies if you suspect damage to water, gas, electric, and sewer lines.  
In the event of water damage, Mr. Restore is the company to call in Dallas. Not only do we offer 24/7 emergency services, but we are also on site within the hour. Our complete restoration services include advanced drying technologies. Our project managers are certified through the American Drying Institute and can ensure that the damage is little to none. We are family owned and operated in Dallas and offer free evaluations to those who contact us for restoration service or environmental remediation. We pride ourselves on being a total restoration and cleanup company. We handle all of our projects in with the highest level of expertise and experience.

Different removal methods and measures are used depending on the category of water. Due to the destructive nature of water, chosen restoration methods also depend heavily on the amount of water, and on the amount of time the water has remained stagnant. For example, as long as carpet has not been wet for longer than 48 hours, and the water involved was not sewage based, a carpet can usually be saved; however, if the water has soaked for longer, then the carpet is probably irreparable and will have to be replaced.[8] Water damage restoration can be performed by property management teams, building maintenance personnel, or by the homeowners themselves; however, contacting a certified professional water damage restoration specialist is often regarded as the safest way to restore water damaged property.
×