When it comes to a flood or water damage emergency in your home, every minute counts. If floodwater inside your home is not dealt with quickly, your walls, as well as your carpet, flooring, ceiling and personal property can quickly become waterlogged and damaged beyond repair. Flooded zones can quickly become unsafe for human exposure. Consider that dangerous bacteria begin to multiply in wet environments, not to mention rot and mold growth. All it takes is a few inches of water to create a serious threat to your home or office. The harmful effects of water damage can be reduced greatly by the prompt and reliable emergency flood services from Roto-Rooter.
Gray water contains a significant level of contamination and has the potential to cause discomfort or sickness if consumed by or exposed to humans. Gray water may contain chemicals, bio-contaminants (fungal, bacterial, viral, algae), or other contaminants. Examples include: discharge from dishwashers or washing machines, overflows from washing machines, overflows from toilet bowls with some urine (no feces), sump pump failures, seepage due to hydrostatic pressure, broken aquariums, and punctured water beds. Gray water that remains untreated for longer than 48 hours may escalate to Category 3.

A flood-damaged car that has been totaled should have a “salvage” title, but some sellers use lax registration procedures in certain states to “launder” titles and eliminate the salvage branding. Buyers should also know that flood-damaged vehicles can be shipped anywhere for resale, and continue to appear in the marketplace for many months following major floods.
Water is pumped out of your home or property to our recovery tank mounted inside our truck, ready for proper disposal. Standing water is removed, allowing our water extraction team inside your property to assess damage to all structures, furniture, and personal items, inspect your property to traces of mold, and to set up equipment designed to quickly dry the property.
Mold: Some companies may allow you to purchase coverage for mold remediation. This varies from state to state and by insurance company. In some states like California and Texas, policy makers are pushing to have limited basic mold coverage added to the policies. However, the best way to find out if your policy provides any provision is to inquire with your representative or licensed insurance professional to find out if this could be available to you. It may be available by endorsement; every company is different.

Once any standing water has been removed, it’s time to start drying out the home. Your contractor will bring in different types of air movers (think of these like glorified fans) to help circulate airflow throughout the room. Don’t be surprised if they need to lift up a section of the carpet or position one of the air movers at certain sections of the walls to ensure air is getting to the most saturated parts of the room. If you have hardwood floors, they may use floor mats which help draw the water out of the floor. If needed, they might even remove the baseboards and drill holes into the drywall to help the walls dry faster. While some of these methods may sound extreme, they’re making every effort to dry the home without having to demolish and rebuild, which could add multiple weeks to the project timeline and become very costly.
Ice dams and other roof problems can also cause water damage to siding materials as well. Here, the biggest danger is water seeping in behind your siding and causing permanent damage to more vulnerable materials. So if this happens, you will need to remove or replace the siding quickly before rot sets in. Water can also seep in behind faux stone and other external walls around your home. So it’s important to be thorough in this inspection.
If it snows where you live, be wary about the formation of ice dams on your roof. This happens when the heat inside your home causes water to melt in the middle of your roof. The water then refreezes near the edges, forming a dam that prevents melting snow from draining off the roof. The water that backs up can leak into your home and damage ceilings, walls and other areas of your home. To prevent ice dams from forming, insulate your attic to keep heat from rising and reaching the roof.
Unlike sites which blend pricing from dissimilar jobs, Homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.

Believe it or not, there are three types of water. The first type is “clean” water from rain, condensation, leaky pipes, and so on. It’s relatively harmless to clean it up yourself. But if you decide to seek outside help, it costs around $3.75 per square foot for basic water damage cleanup (replacements not included). The second type is gray water, slightly dirty water from dishwashers, washing machines, clean toilets, and so on. And it may have some contaminants. But you can clean it up yourself if you remove it carefully and with proper safety gear to protect yourself. Professional water damage cleanup cost rises to $4.50 per square foot.

Hurricanes and river flooding are common natural causes, as are high water tables and improperly graded ground. Installing a sump pump and water alarm are sensible preventions in areas with high water tables. The sump pump will pump water from under the foundation to drain it away from the home and averages about $1,200 to install. The sump pump itself will cost between $50 to $400. Also, ground that slopes towards the basement of the home can lead to leakage in the basement and increased stress on sewage systems.


"One of the biggest problems—especially in Houston in the summer—is going to be mold," says Tyler Drew, a Los Angeles real estate agent and investor. "The longer a house sits with water, the worse the mold infestation. Affected areas have to be removed, the wood and concrete treated with anti-mold agents, and all of this has to be done after the house is sealed, in order to prevent the infestation from spreading and sickening people."
Remove all of the drywall from the wall if the wrong type of drywall was initially installed. On rare occasions, mold damage results from using the wrong type of drywall for a particular application. The two most common causes of mold damage, not created by water leaks, are drywall installed behind tile, or regular drywall installed in a bathroom instead of mold resistant drywall.

Unlike sites which blend pricing from dissimilar jobs, Homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.

After a sketch is made of the piece of equipment, add the equipment to a detailed electrical equipment tracking sheet, which should include general information such as the item number, sequence number, priority, area of the plant, power center or room number, transformer, substation, cell position, equipment type, circuit identification, plant identification number, manufacturer, percent water level, model number, frame size, and voltage. After completing these procedures on all the equipment associated with a power center or a piece of gear, the QA/QC leader must review the documentation for accuracy. Once the documentation has been approved, the equipment is ready for removal.
Fire and Water Restoration companies are regulated by the appropriate state's Department of Consumer Affairs - usually the state contractors license board. In California, all Fire and Water Restoration companies must register with the California Contractors State License Board.[10] Presently, the California Contractors State License Board has no specific classification for "water and fire damage restoration."
×