The electrical systems in modern cars are particularly prone to flood water damage. Engine control computers, vehicle sensors, infotainment systems, and other electronic devices – along with wiring harnesses and the many connectors that join them together – can be very difficult to salvage. Unless every part is thoroughly cleaned and dried, inside and out, problems caused by corrosion can crop up weeks or even months after the flooding.

There are also several classes of water damage. The class of damage is important when assessing water damage repair options. Class 1 is the least harmful form of damage. Materials absorb very little of the water from this type of damage. Water damage repair is the easiest in this type of situation. Class 2 has a fast rate of evaporation, which means that carpets and cushions may be damaged. Water damage repair is more difficult when it involves class 2 damage. Class 3 has the fastest rate of evaporation. In this case, the water may come from broken sprinklers or other overhead sources, soaking the walls and furniture. Class 4 requires special water restoration and water removal procedures. This type of damage may affect hardwood floors, plaster, and concrete.


Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
For instance, if you remove 16 ejector pins from a mold and notice that a couple of them feel tight, will you remember which ones were tight later on, when you peruse past records to discover that galling pins have been a problem for the past five production runs? Knowing this information before you split or disassemble a mold removes some of the guesswork involved when looking for the root cause.
Everything could be fine in your house as you sleep at night. However, it only takes a broken pipe, water heater, washing machine, fire, or a sudden major storm, to cause major water damage to your home. When you are overwhelmed with water you need to do something about it now, and you can depend on your water damage restoration professionals to be there when you need them.
It’s time for one of the most important steps: removing any standing water from the home. The removal process is actually much less complicated than you may think. Contractors use fancy shop vacuums and rotate them around the room, sucking up all the water that’s present in the area. The amount of time this phase takes varies depending on the type of substrate that’s being dried, the size of the room and the total amount of water that’s present.
Understand that there are several people who represent the insurance company during a claim, so you want to know where the decision is coming from. Was it your agent who told you, the insurance adjuster, or a contractor? Each person plays a different role. Don't be afraid to request clarifications to avoid misunderstandings. When a claim is denied, you will normally receive something in writing advising you of the official decision.

From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
Accurate and efficient troubleshooting of past and current defects is based on a repair technician’s ability to understand and relate existing processing and production conditions (as revealed by tooling wear marks and residue characteristics) to historical data. Issues should be segregated (long gates, specific flash etc.), analyzed, and then corrected one at a time.
In the event of water damage, Mr. Restore is the company to call in Dallas. Not only do we offer 24/7 emergency services, but we are also on site within the hour. Our complete restoration services include advanced drying technologies. Our project managers are certified through the American Drying Institute and can ensure that the damage is little to none. We are family owned and operated in Dallas and offer free evaluations to those who contact us for restoration service or environmental remediation. We pride ourselves on being a total restoration and cleanup company. We handle all of our projects in with the highest level of expertise and experience.
Water is pumped out of your home or property to our recovery tank mounted inside our truck, ready for proper disposal. Standing water is removed, allowing our water extraction team inside your property to assess damage to all structures, furniture, and personal items, inspect your property to traces of mold, and to set up equipment designed to quickly dry the property.
Any mold professional should be able to explain your mold removal project in plain English.  If a contractor is unable to explain the basic processes and steps of mold remediation and mold removal in layman’s terms, be very wary!  If someone tries to complicate and confuse you about the process and scare you into hiring them, walk away and say, “Thanks, but no thanks.”
If the home is habitable, take precautions to keep yourself and your family safe from injury. Use flashlights to move around dark rooms, for example. If the home isn’t habitable, don’t try to stay there. Move to a shelter or alternate location. Consult your insurer to find out what provisions the company will make for temporary housing while your home is being repaired.

Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?
The average homeowner spends $7.00 per square foot for professional cleanup. That does not include the amounts for repairing and replacing items. Typically, anything that can absorb the contaminants in black water should be replaced, including upholstered furniture, beds, carpets, clothing, and all permeable building materials. Replacement is often more cost effective than restoration.

The resulting damage is a different than the initial damage.For example, if water damage resulting from a broken pipe, or appliance is listed in your wording as covered, then you may be compensated for a portion of the damages caused even though the deteriorated pipe replacement or a new appliance would not be covered. This is an example the cause of the damage not being covered, but the resulting damage being covered.
You can find out how old your water heater is by looking up the serial number on the manufacturer’s sticker near the top of the water heater. Make sure to regularly inspect your water heater to check for signs of moisture build-up, mold or corrosion. If your water isn’t as hot as it used to be or there’s rust coming from your faucets, it’s time to call a plumber or water heater specialist.
Important: Abrasive stones break down during mold and die polishing, grinding, tool sharpening, and dressing of cutting & grinding wheels. The resulting dust is classified by OSHA as inert or nuisance dust. Please consult the Material Safety Data Sheet for each stone; data provided therein pertains primarily to the dust produced during and after use. Please note that hazards may change when abrasive stones are used in conjunction with solvents, cutting fluids or other chemicals. For more complete information, consult the Material Safety Data Sheets of chemical products used with abrasive stone products.
If left untreated, water can be a destructive force to any residential or commercial property. It can lead to mold growth, stains, and can jeopardize the integrity of the building. Our restoration specialists can carefully inspect your property to determine the extent of the damage and can create customized solutions for you. With our 24/7 emergency services, you can rest assured you have a trusted team ready to help you.
×