Unless you’re doing laundry, you probably don’t think twice about your washing machine. But if it breaks down, the results could be catastrophic. For example, if the supply hose is damaged or has a faulty connection to the wall or washing machine, more than 600 gallons of water could potentially spill out within an hour. That could lead to significant water damage, especially if your washing machine is located on the second floor of your home.
Heavy rain, rapidly melting snow, rising rivers, and breaches in levees or dikes can cause vehicle flood damage and the need for difficult and expensive auto repairs. Once floodwaters rise above the vehicle door openings, extensive disassembly may be required for cleaning. To avoid causing additional problems, never attempt to start a flood-damaged car until a thorough vehicle inspection has been performed by a qualified technician.
Many parts of a car are challenging to clean and dry because they are hard to access. Door locks, window regulators, power seat motors, heating and air conditioning components, and many small parts are tucked away in enclosed areas or up under the dash. These items may work okay immediately following a flood, only to fail later due to contamination by dirty water.
The methods for dealing with damage to walls depend on the type of materials and also what’s behind those materials. Drywall can often be salvaged, when you respond quickly to damage. You can purchase moisture meters that allow you to assess structural integrity. If the integrity checks out then your drying approach will depend on wall contents. If the wall has insulation, you will need to use flood cuts. If there is no insulation, then usually the best method is to create weep holes. And if you’re dealing with a firewall, you’ll want to use staggered cuts.
All water damage restoration jobs are unique and the amount of work required for each depends on a variety of factors such as the amount of area in the home that’s been damaged and how long the water has been present. Once a professional water damage cleanup vendor arrives and has a chance to inspect the home, they’ll be able to put together a detailed project timeline specific to your job. In the meantime, we’ve listed the eight common phases that occur during the water damage restoration process and what happens in each, so you’ll know what to expect.
Surface molds grow in just about any damp location, such as the grout lines of a ceramic tiled shower. They’re easy to scrub away with a mold cleaner mixture of 1/2 cup bleach, 1 qt. water and a little detergent. In mold remediation, the bleach in the cleaning mixture kills the mold, and the detergent helps lift it off the surface so you can rinse it away so it won’t return as fast. You can also buy a mildew cleaner at hardware stores, paint stores and most home centers.

Expert Rytech technicians will apply state-of-the-art drying process techniques to your property and issue a full written report to Olympus upon completion. Rytech gives you the added security and assurance of specialists who carry visible identification, arrive in clearly marked Rytech vehicles, and wear protective footwear to avoid soiling undamaged areas of your property.
Public insurance adjusters are independent adjusters who help people negotiate claims with their insurance companies. Public adjusters work for you, not the insurance company. They charge you a fee for their services. The fee is usually a percentage of the claim and is subtracted from any settlement you get from your insurance company. You don't have to hire a public adjuster.
If you can already see it, you usually do NOT need to spend money on pre-testing mold. Plain and simple: you just need to remove it. Since no visible mold growth belongs in a healthy home (no matter what the type) and all mold should be removed the same way, there is usually no need to identify what types and concentrations of mold you have via testing.
We are the most trusted name in property damage restoration because we don’t outsource and you can trust our workers when they are in your home. They are specially trained and industry certified. You will be assigned a Project Manager who will walk you through the entire process step-by-step.  The team leader is plugged into your job every single day. No exceptions.
All severely warped wood (particularly flooring), rotting wood and wood that has developed mold/mildew problems will need to be replaced. Pry apart damaged boards and thoroughly clean beneath them before replacing them. And if the wood is a structural component of your house, you must be very careful when replacing it so that the structure has the right support during and after the water damage repair project.
Homeowners insurance may help cover damage caused by leaking plumbing if the leak is sudden and accidental, such as if a washing machine supply hose suddenly breaks or a pipe bursts. However, homeowners insurance does not cover damage resulting from poor maintenance. So, if damage results after you fail to repair a leaky toilet, for example, homeowners insurance likely will not pay for repairs.

When there’s been water, fire, tornado or flood damage to your home or commercial business it’s difficult to know who to call to help clean up and repair the property. The answer is easy! Mr. Restore is a Dallas restoration company that provides comprehensive restoration services, as well as environmental remediation. Contact Mr. Restore today, and we can be at your property in 60 minutes!

Among the most common and most preventable causes of water damage are burst pipes. Burst pipes typically happen because of clogs and freezing. Prevent the damage by finding a family plumber to do annual inspections. Regular inspections and maintenance are a cost-effective, preventative measure. Installing new plumbing typically runs between $350 to $2,000.


When water invades your home, it can be an overwhelming and stressful experience. When this happens, the best course of action you can take is to call a restoration company, such as Mr. Restore, immediately. As soon as we arrive on your property, our team can find the source of the problem, stop the water from coming in, and proceed with the water removal process. If you wait on contacting us, secondary water damage can occur, and mold formation could potentially begin. Our crew thoroughly dries any surfaces that have incurred water damage, such as wood, drywall and paneling.
Over a quarter of a million American homes each year will suffer from damage due to frozen or burst pipes. A frozen, broken or leaky pipe are all inconveniences that can lead to major headaches for your home. Ignoring these repairs can be extremely costly as basement water damage can lead to an unstable structure and damage of your valuables. When you need flood damage cleanup with a burst or frozen pipe or are dealing with flooding at all, give us a call today!
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
Since you should notify your insurer soon as possible after the flood, it’s a good idea to keep your insurance company and local agent’s phone number in your always-ready emergency bag. (Note that the NFIP works through private insurance companies, so you contact your insurer just as you would for any other type of claim). In cases where a flood has affected a region or community, your agent may be busy handling his or her own flood issues. In that case, contact the insurance company’s headquarters. 
Gradual damage is when something happens slowly over time and causes damage to your property. Gradual damage due to water damage is a common problem when it comes to insurance claims. An example of gradual damage is when something happens slowly, like paint chipping off a wall it starts with a small chip, then eventually half the wall is uncovered.
Throughout the drying process, crews will stop by periodically to monitor how the drying is progressing. Specifically, they monitor the dehumidifiers’ intake and output temperatures and humidity levels to make sure the dehumidifiers aren’t putting wet air out into the room. They’ll also go back and take readings of the same surfaces they did during the inspection phase. As rooms are declared dry, crews will often move equipment around to other areas of the home that are still wet.
Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.

It is important to hire one of these water damage restoration companies as soon as possible after water damage occurs. Moisture promotes the growth of mold and other organisms, increasing the risk for serious health problems. Mold exposure may aggravate allergy and asthma symptoms, especially in children and people with compromised immune systems. Exposure may also increase the risk for respiratory diseases and other medical problems. Cleaning up immediately can help mitigate the health effects of water damage on everyone in a home or commercial space.
After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.
From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
Water damage is one of the most common causes of home insurance claims. According to ISO, Water damage claims are the second largest frequent insurance claim, following wind and hail damage. The percentage of claims due to water damage is also increasing, while other causes of damage have stayed fairly consistent or even decreased. It's no wonder people have a lot of questions about water damage and what is covered on home insurance, and why things, like "gradual damage" are not covered. Things get even more complicated when we look at the exceptions.
Mold can develop within 24 to 48 hours of a flood, says Ashley Small of FEMA, so remove wet contents, including carpeting and bedding, as soon as possible. If an item has been wet for less than 48 hours, it may be salvageable. However, you’ll need to decide whether it holds enough monetary or sentimental value to try to do so. And notify your insurance company before removing items to ensure that you’re not affecting coverage. Always photograph the flood-soaked items.
Keep the basement dry as it's the most common place to find damage. Flooding, burst pipes, and even clogged gutters can cause leaks. Pitching the landscape, cleaning the gutters, and installing downspout extensions are simple outdoor fixes. From the inside, install a sump pump and water alarm. Have the basement inspected for waterproofing – or have some installed.

When a severe thunderstorm hits, the risk for property damage increases greatly as heavy rains can cause water damage as well as flooding in your home.  Flooding from storms is a major problem that requires a combination of methods to correctly treat it and protect your health.  Unlike typical water damage from a leaky roof or a burst pipe, flood damage often includes raw sewage that can complicate the remediation process.  As soon as flooding occurs in your home, make sure to call a flood damage cleanup expert to mitigate the damage and safely remove the flood water.
Many parts of a car are challenging to clean and dry because they are hard to access. Door locks, window regulators, power seat motors, heating and air conditioning components, and many small parts are tucked away in enclosed areas or up under the dash. These items may work okay immediately following a flood, only to fail later due to contamination by dirty water.
Today’s precision welding shops specializing in plastic injection mold, dies and tooling repair have a wide range of new technologies available to enhance their ability to provide the highest level of quality, craftsmanship, and service to their clients. One of the fastest growing technologies is the use of manual laser welding systems as an alternative to traditional microscope GTA welding.
High-quality mold repairs are consistently achieved with the DME ProWeld Micro-Welding System from Milacron. ProWeld provides precision results that increase mold life after every repair. The system is safe and easy to operate, and reduces repair costs by up to 85% with special metal alloys developed for all conventional types of steel. The ProWeld System emits almost no heat and is suitable for all forms of mold damage. There is no need for other types of welding (i.e. TIG, argon, laser welding) so the system emits no harmful welding fumes or toxic gases. Many customers report that the ProWeld System returns its investment cost well within a year of its purchase.

The information in this publication is current as of the revision date. Changes in laws and agency administrative rules made after the revision date may affect the content. View current information on our website. TDI distributes this publication for educational purposes only. This publication is not an endorsement by TDI of any service, product, or company.
Restoration dehumidifiers are an important piece of restoration drying equipment. Humid environments are ripe for the development of mold and bacteria, so drying them quickly and effectively is important. You can find a wide range of different types of dehumidifiers, varying in size and capacity and the choosing the right one will depend on the types of environments in which they are used.
×