We can provide dehumidification for your property. This goes along with the mold removal and prevention process. The living areas of your home should not have humidity; this is normally taken care of by your central air conditioning system. However, if your AC ductwork has a crack or leak, or if your home does not have central air, the interior of your house may sometimes have damp or humid air. The dehumidification process eliminates that and saves you the headache of mold removal down the road.

If you’ve recently experienced a flood or pipe burst and have water damage in your home, you’re probably wondering “what happens now?” The first, and most important, step when dealing with water or flood damage is to stop any active leaks in the home. This can be done by shutting off the home’s main water supply. If you don’t know how to shut off your home’s water supply, call a professional plumber or your local water supply company for assistance. Once any active leaks have been addressed and all water has been turned off, it’s imperative you call a professional to start the water damage cleanup process as quickly as possible to minimize damage.

Wear a respirator or a facemask rated for black mold spore protection, and cover arms, legs and hands to avoid contact with mold spores. Use soap and a sponge to remove visible mold. If the moldy area is dry, lightly spray with water, as this will reduce the incidence of airborne mold spores during cleaning. Next, use commercial black mold removal products, which can be found in most hardware or home repair stores, to disinfect the moldy areas, in addition to any adjacent areas. If you use bleach, make sure it won't discolor the material or surface. Place all sponges, equipment and other materials used in cleaning in a heavy duty garbage bag, and if possible, remove the bag through an nearby exit as opposed to the main house, to avoid distributing mold spores.

Type depends on the source and extent to which it has affected the home. Sources can range from clean water from a burst pipe to black water from sewage backup. Cleanup ranges from $3.75 to $7.00 per square foot. Repairs range from $450 to $7,000. Again, these vary widely depending on the source and extent of damage, whether it's a flooded basement, leaky toilet, or damaged roof.

Mold can develop within 24 to 48 hours of a flood, says Ashley Small of FEMA, so remove wet contents, including carpeting and bedding, as soon as possible. If an item has been wet for less than 48 hours, it may be salvageable. However, you’ll need to decide whether it holds enough monetary or sentimental value to try to do so. And notify your insurance company before removing items to ensure that you’re not affecting coverage. Always photograph the flood-soaked items.

While the mold was still being disassembled, two “cleaners” began pulling tooling out of plates and putting them into buckets in preparation for a good scrubbing—and I mean a scrubbing. Immersing the buckets into a solvent tank, they used their hands like wire whisks as they swished the close-tolerance ejector sleeves around, effectively removing any trace of vent residue or “track” marks on the tooling—and in the process maybe adding some marks of their own.
Appliance hoses. Broken hoses are among the most common causes of water damage. Regularly inspect hoses and hose fittings on washing machines, icemakers, and dishwashers for kinks, cracks, bulges, or deterioration. Replace standard rubber washing machine hoses every two to five years or more often if they are showing signs of wear. Consider using steel-reinforced hoses for longer life.
After a sketch is made of the piece of equipment, add the equipment to a detailed electrical equipment tracking sheet, which should include general information such as the item number, sequence number, priority, area of the plant, power center or room number, transformer, substation, cell position, equipment type, circuit identification, plant identification number, manufacturer, percent water level, model number, frame size, and voltage. After completing these procedures on all the equipment associated with a power center or a piece of gear, the QA/QC leader must review the documentation for accuracy. Once the documentation has been approved, the equipment is ready for removal.
Water damage restoration is often prefaced by a loss assessment and evaluation of affected materials. The damaged area is inspected with water sensing equipment such as probes and other infrared tools in order to determine the source of the damage and possible extent of area affected. Restoration services would then be rendered to the residence in order to dry the structure, sanitize any affected or cross-contaminated areas, and deodorize all affected areas and materials. After the labor is completed, water damage equipment including air movers, air scrubbers, dehumidifiers, wood floor drying systems, and sub-floor drying equipment is left in the residence. Industry standards state that drying vendors should return at regular time intervals, preferably every twenty-four hours, to monitor the equipment, temperature, humidity, and moisture content of the affected walls and contents.[6]
×