Inspect damaged materials for mold and mildew. Mold can start to grow in the right conditions in as little as 24 hours. For long-term issues, like mold caused by attic condensation, the mold may have started growing a long time ago. And if you find mold and mildew issues, you need to be very careful. Some mold is toxic to humans, and all mold is very damaging to the materials it infests. For small mold issues, cut out the material, bag it, and throw it away immediately. For serious mold issues, get out of the area, shut down any airflow (to avoid spore contamination) and call a professional. And keep in mind that mold can show up in hidden areas like inside walls or under floors, so this inspection and water damage repair will be ongoing.
Flooding in a home can lead to more problems than just water damage and health issues, it can also cause rusted pipes and mold growth.  We use water detection probes and sensors to find these hidden flood damage problems so that we can repair them as part of the restoration process.  You can be confident that our flood damage restoration experts will be thorough and complete and if you made an insurance claim, we can help you coordinate the payment with your insurance provider.
"Using truck-mounted vacuums with 2,000 horsepower, and dehumidifiers, we can extract moisture from furniture, hardwood, tile, even Sheetrock," Kent says. Even electronics like TVs and laptops may still operate after a thorough drying. "In fact, when carpet gets wet, people think it's ruined, but it actually ends up stronger than when it was made," Kent says.
When you’re sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. Then install new insulation and drywall and nail the trim back on. And keep in mind that if the moisture returns, mold will return.
“Last December we discovered a leak underneath our kitchen that caused extensive damage. We called WaterBear and they came out that day. The people who came to our house were always respectful, kind and efficient. They did exactly what they quoted us and did it in a timely manner. All of our questions and concerns were answered in a timely manner, also.   They helped us through this very difficult situation. I hope we never have another problem like this, but if we did, I would call WaterBear.” – Anne M.
What do you do when you have a flood in your home? Call a company you can trust. Dalworth's water damage and restoration professionals are certified, bonded and insured for your security and peace of mind. Our experts understand the last thing you need is more stress when your home or business floods. Whether it's a water leak from a burst kitchen pipe or flooding from a natural disaster, contact Dalworth Restoration for your water damage restoration, water cleanup and removal or disaster cleanup services in your North Texas town.
Even a competent DIYer should have a qualified professional assess the damage first — making sure no part of the cleanup is missed. Before doing anything, check with your insurance company — they may require a licensed assessment. Don't wait. As soon as you detect any damage, call a professional. With time, each class and category quickly degrades into something worse.
After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.
It is possible to recover from a catastrophic event with a more reliable system than before. However, the speed and efficiency of the recovery will depend on the availability and accuracy of documentation. In preparation or planning for the recovery of an electrical system, the facility should ensure that all drawings/documentation are up to date and a copy is kept in a safe location that can be accessed after the event.
You may also wish to hire a flood restoration service—you can find pros under “Flood” or “Disaster recovery” in your local phone book, or check with the Better Business Bureau, local Chamber of Commerce, or contractor recommendation sites, such as Angieslist.com or MerchantCircle.com. Look for those with Institute of Inspection, Cleaning, and Restoration Certification.
For instance, if you remove 16 ejector pins from a mold and notice that a couple of them feel tight, will you remember which ones were tight later on, when you peruse past records to discover that galling pins have been a problem for the past five production runs? Knowing this information before you split or disassemble a mold removes some of the guesswork involved when looking for the root cause.
Policyholders don’t want hassles.  We’ll make sure you get the coverage you paid for, remove the headache of having to work with your insurance company, and streamline the entire process.  You have enough to worry about; we’ll work with your insurance company to achieve your complete satisfaction.  In fact, we’ll usually do a survey with the insurance companies to make certain each and every policyholder gets everything they are entitled to get.

Water damage occurs when excess water begins to pool in areas where it shouldn’t. Many different factors can create this excess water and thereby contribute to water damage. When you are aware of the potential causes, you can take precautionary measures to help insure against a leak or flood. You will also be able to spot a problem as soon as it arises and nip it in the bud before it has a chance to cause any additional damage. The more quickly you notice the problem, the less work the water extraction and >water damage restoration company will have to fix.
Policyholders don’t want hassles.  We’ll make sure you get the coverage you paid for, remove the headache of having to work with your insurance company, and streamline the entire process.  You have enough to worry about; we’ll work with your insurance company to achieve your complete satisfaction.  In fact, we’ll usually do a survey with the insurance companies to make certain each and every policyholder gets everything they are entitled to get.
Fire and Water Restoration companies are regulated by the appropriate state's Department of Consumer Affairs - usually the state contractors license board. In California, all Fire and Water Restoration companies must register with the California Contractors State License Board.[10] Presently, the California Contractors State License Board has no specific classification for "water and fire damage restoration."
×