Once you get the OK from your insurer to remove the water, use a sump pump, available from most hardware or home supply stores for $150 to $500, and a wet vac ($40 to $130). Ramirez cautions that water is heavy—a cubic foot weight 10 lbs.—so be careful not to injure yourself, especially if you’re carrying buckets of water up and down stairs. Open doors and windows to allow fresh air to circulate so long as that won’t allow in more water.
From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
It’s important to get rid of all moisture ASAP before it causes more damage. And for small leaks, this may not be difficult, but it’s important to be thorough. Use fans to circulate air in the affected area. For larger projects, consider renting a large-capacity dehumidifier to really dry out surrounding wood, carpet, and other materials. You don’t want any moisture left after your water damage repair.
Once a region has been officially declared a “disaster area” by government authorities, property owners have access to increased resources, including public services to protect and remediate the area. In addition, you may have access to financial assistance. Your insurance company will have additional information on this or you can contact FEMA directly.
We can provide dehumidification for your property. This goes along with the mold removal and prevention process. The living areas of your home should not have humidity; this is normally taken care of by your central air conditioning system. However, if your AC ductwork has a crack or leak, or if your home does not have central air, the interior of your house may sometimes have damp or humid air. The dehumidification process eliminates that and saves you the headache of mold removal down the road.
Laser welding, combined with targeted material selection and hardness matching, results in a gate repair that surpasses what can be achieved with traditional methods that match the base material and the filler. The laser welding process permits the use of a wide range of dissimilar metals, allowing selection of a filler metal that will result in optimal performance. Laser welding can be used to combine many different materials, including P-20, Beryllium Copper (BeCu), Stainless Steel, S-7, H-13, and others. One of the most common marriages of materials is Stainless Steel to BeCu, which maintains the cooling properties of BeCu while adding a better wear surface in the Stainless Steel. For example, a 410 stainless steel filler can create a fine martensitic microstructure, delivering optimal wear without compromising the mold’s ability to withstand flexing during injection.
If you’re dealing with anything other than a large incursion, you understandably may be considering handling the cleanup and drying yourself to save money or time. The problem is that cleaning up and recovering from water damage isn’t always as straightforward as it seems. This post highlights 3 key things you need to be aware of when addressing water damage from a minor clean water (or Category 1) incursion.
The information and advice contained in this article is intended as a general guide for informational purposes only. It does not take into account your personal situation. While we at Resolve have significant experience and history operating in the home restoration industry and working closely with construction contractors, we are not licensed as a general or specialty contractor. We encourage you to consider the information we’ve provided but urge you not to rely upon it in place of appropriate professional advice from a licensed, experienced construction contractor.
Nashville Water Damage Flood Repair has over 30 years of combined experience with damage restoration companies in the Nashville Tennessee area. Emergency flood repairs, water removal and extraction are all services we are highly trained in with years of experience to solve your water damage problems with creative and cost effective solutions. We help with all insurance claims, residential and commercial large loss claims as well in Murfreesboro & Franklin along with Nashville.
Alameda, Antioch, Berkeley, Burlingame, Campbell, Concord, Daly City, Danville, Fremont, Foster City, Hayward, Hillsborough, Los Gatos, Los Altos, Menlo Park, Monterey, Morgan Hill, Mountain View, Oakland, Palo Alto, Piedmont, Pleasanton, Pacifica, Redwood City, Richmond, San Carlos, San Francisco, San Jose, San Leandro, San Mateo, San Ramon, Santa Clara, Santa Cruz, South San Francisco, Saratoga, Walnut Creek
Though a competent DIY homeowner may be able to clean up and repair some damage, it's important to have a professional assess it first to determine the extent and any underlying conditions. Missing even a small amount, or its causes, can lead to costlier repairs later. Even small quantities of moisture may result in mold growth. Plus, undiagnosed causes will lead to recurrences. For instance, fixing a damaged ceiling but not the leaky roof that caused it will only lead to another wrecked ceiling.
The longer water damage sits untreated, the more likely it is that additional damage can occur. If it’s determined that drying equipment is needed, dehumidifiers will often be placed in the home to prevent against further damage like mold growth while the vendor is waiting for approval from the insurance company, if one is involved. Dehumidifiers can be present for one or multiple nights depending on factors such as the length of time the water has been present and the source of the leak. The contractor working on your home will be able to assess how long the dehumidifiers are needed.
If you have to remove mold concentrations or perform any black mold removal covering more than a few square feet, where the musty odor is strong or where you find extensive water damage, we recommend that you take special precautions. You want to not only avoid contaminating the rest of the house but also protect yourself from breathing high concentrations of spores and VOCs.
When a disaster of this magnitude occurs, the first things a plant will need are lighting and pumps. This requires the use of on-site generators and temporary power connections. It's highly recommended to not allow the plant distribution system to be back-fed. If a motor is required to turn a pump, a portable motor starter fed by the generator should be installed on a temporary panel next to the motor.
Melting Ice & Snow: With spring comes nicer weather, but also the occasional risk of flooding in areas that cannot fully absorb all the water. When temperatures fluctuate from day to day, melted ice can refreeze and cause a whole other set of problems. Due to this hazard, it is extremely important to keep an eye on the weather and fix the problem as soon as it occurs.
This category contains contaminants that will cause serious health issues and possibly death. Only professionals should handle most large-scale black water accidents such as flooding. Some cleanup, like a backed-up toilet, can be handled by competent homeowners. This type of cleanup and repair is usually the most expensive, often requiring specialized equipment used by qualified mold and chemical remediation crews. It will often require replacement (not just cleaning) of the affected home materials.
If your home or business is flooded, make sure to call a flood damage cleanup professional immediately. The water damage will continue to spread the longer you do not take action and there is a good chance that the flood water contains sewage which can contribute to health problems. Call us at 1-888-915-8868 or use the form on the right of the page to locate a flood damage restoration expert near you.
To prevent water damage, you should replace your washing machine supply hose at least once every five years. Also, resist the temptation to overload your washing machine. Constantly stuffing too many clothes into your washing machine could loosen gaskets and valves or cause cracks. Take good care of your washing machine and your washing machine will take good care of you.
Damage from long standing water falls in this class, like river flooding or storm surges from a hurricane. It has saturated materials such as stone, brick, and hardwood. These materials have low permeance — meaning they do not soak up liquids quickly. Time is the primary factor in this category. With a higher cost of cleanup and repair, it is important to get problems diagnosed and solved as quickly as possible.
As soon as you have a water emergency on your hands, all you need to do is call your water restoration company. They are available 24 hours a day and 7 days a week because they know that water emergencies can happen any time of the night or day. Your restoration professionals start to work immediately to stop any further damage from happening to your home.
Remove all of the drywall from the wall if the wrong type of drywall was initially installed. On rare occasions, mold damage results from using the wrong type of drywall for a particular application. The two most common causes of mold damage, not created by water leaks, are drywall installed behind tile, or regular drywall installed in a bathroom instead of mold resistant drywall.
After this type of catastrophic event, it's typically best to replace certain types of equipment rather than try to recover items such as receptacles, light switches, start-stop stations, fire alarm panels, and metering equipment. Your crews must also drain all the conduits by opening up the conduit covers and letting gravity drain out all water and debris.
A critical part of any mold maintenance plan is to provide the technicians a historical summary of past issues and corrective actions so they may be aware of longstanding or unresolved issues during repairs. Unfortunately, some technicians skip this first stage until after they get a mold disassembled—and then they stop to research a problem whenever they see or feel something they don’t like.
The insurance company must start investigating your claim within 15 days after receiving written notice and may ask you for more information. Once you send the information, the insurance company has 15 business days to accept or reject your claim. If the insurance company says it will pay your claim, it must pay within five business days. If the insurance company rejects your claim, it must explain its reasons in writing.
We offer structural drying, as after the immediate water emergency has been resolved with damage restoration, your house and its contents still need to be thoroughly dried out. We have specialized equipment that is able to get this done in as short a time as possible, and with minimal disruption. Our commercial-grade water extractors will get your carpet and other flooring back to nearly 100% dry condition. We also use high-speed blowers to circulate air at high volumes throughout the house in order to facilitate the drying process.
Sewage back‐ups, pipe leaks and breaks not only cause sewage damage, but result in dangerous conditions that require meticulous cleanup to ensure a return to a safe environment. That’s why WaterBear leads in industry standard guidelines and takes every precaution to contain contamination within exposed areas, then thoroughly cleans and decontaminates them. We work to return the areas to their original state – fresh, clean and safe.
While there are currently no government regulations in the United States dictating procedures, two certifying bodies, the Institute of Inspection Cleaning and Restoration Certification (IICRC) and the RIA, do recommend standards of care. The current IICRC standard is ANSI/IICRC S500-2015. It is the collaborative work of the IICRC, SCRT, IEI, IAQA, and NADCA.