Roofs should be inspected annually. A professional roof contractor can look for exterior and interior warning signs that your roof’s condition may lead to water damage, including cracked or missing shingles and areas where water is prone to pool. An inspection can cost several hundred dollars, but in exchange for your peace of mind, it’s priceless.
Coastal Surge: If you live by the ocean, rising tides and seasonal storms can cause flooding to your property. When a high tide corresponds with a storm, it can be a recipe for disaster. As well as those right along the coast, other properties set slightly off from the ocean can also be at risk. High winds from the storm can also help water infiltrate and damage buildings and land.
Today’s precision welding shops specializing in plastic injection mold, dies and tooling repair have a wide range of new technologies available to enhance their ability to provide the highest level of quality, craftsmanship, and service to their clients. One of the fastest growing technologies is the use of manual laser welding systems as an alternative to traditional microscope GTA welding.
Mildew is a surface type of mold that won’t damage your home’s structure. But other types of mold cause rot. Remove mildew from wood when you probe the suspect area with a screwdriver or other sharp tool (Photo 3). If the wood is soft or crumbles, the fungi have taken hold and rot has begun. We’ll show you how to remove mold from wood in a few steps.
If it snows where you live, be wary about the formation of ice dams on your roof. This happens when the heat inside your home causes water to melt in the middle of your roof. The water then refreezes near the edges, forming a dam that prevents melting snow from draining off the roof. The water that backs up can leak into your home and damage ceilings, walls and other areas of your home. To prevent ice dams from forming, insulate your attic to keep heat from rising and reaching the roof.
Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 
Flooding in a home can lead to more problems than just water damage and health issues, it can also cause rusted pipes and mold growth.  We use water detection probes and sensors to find these hidden flood damage problems so that we can repair them as part of the restoration process.  You can be confident that our flood damage restoration experts will be thorough and complete and if you made an insurance claim, we can help you coordinate the payment with your insurance provider.
Structure is a word I don’t care for, but it seems to be required in most everything we do. In mold design, mold building, molding parts, and, yes, in mold repair. As a kid, my dad used to “structure” any rebuilding work on 19th-century gasoline engines that my brothers and I did. Coming home one day to find his super-organized shop littered with pistons, flywheels, crankshafts, and other miscellaneous engine parts and tools, he “structured” an immediate change in our work habits. After that painful experience, we did not have the freedom to just tear into the old engines without first clearing with him our plan for the day—which meant we would always be tested as to what we thought a good rebuilding sequence should be, based on what we know about a particular engine. It took a few rebuilds to appreciate the value of a structured sequence.
Surface molds grow in just about any damp location, such as the grout lines of a ceramic tiled shower. They’re easy to scrub away with a mold cleaner mixture of 1/2 cup bleach, 1 qt. water and a little detergent. In mold remediation, the bleach in the cleaning mixture kills the mold, and the detergent helps lift it off the surface so you can rinse it away so it won’t return as fast. You can also buy a mildew cleaner at hardware stores, paint stores and most home centers.
Our water damage technicians first determine the cause of flooding in your home before beginning the process of draining, cleaning, and restoring. The water damage cause plays a vital role in the water damage process. When flooding is caused by natural calamities, there’s a higher chance of bacteria buildup in the affected areas and calls for immediate disinfection. Other water damage causes do not pose health threats and require only the basic process of restoration.
The electrical systems in modern cars are particularly prone to flood water damage. Engine control computers, vehicle sensors, infotainment systems, and other electronic devices – along with wiring harnesses and the many connectors that join them together – can be very difficult to salvage. Unless every part is thoroughly cleaned and dried, inside and out, problems caused by corrosion can crop up weeks or even months after the flooding.
Though not the most common precipitator of water damage repair in the NH, storm flooding can cause serious short term and long-term problems to your residential or commercial property. The likelihood of flood-water damage to your property is rising, and property owners need to be prepared to deal with this very real possibility.  Flooding from seasonal storms is more common than you’d think, and the problems that arise from it need to be addressed as quickly as possible.
From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.

Most insurance policies will pay to remove mold only if it must be removed to repair or replace property that was damaged by a covered peril. You must report water damage that was hidden from view within 30 days of the date you first noticed it. Some companies provide a limited amount of mold remediation coverage, and other companies will allow you to buy additional coverage for mold remediation by endorsement.
Though a competent DIY homeowner may be able to clean up and repair some damage, it's important to have a professional assess it first to determine the extent and any underlying conditions. Missing even a small amount, or its causes, can lead to costlier repairs later. Even small quantities of moisture may result in mold growth. Plus, undiagnosed causes will lead to recurrences. For instance, fixing a damaged ceiling but not the leaky roof that caused it will only lead to another wrecked ceiling.

A dark, damp crawl space allows mold to flourish, which can then cause structural damage. Moisture dripping through the concrete foundation of your home can cause basement leaks. Air leakage into the section between the attic and the home can cause moisture on the underside of the roof, which can lead to mold and rotting. Check your home periodically, and look for light fixtures that are look as well as the overall quality of any noticeable piping.

Most insurance policies will pay to remove mold only if it must be removed to repair or replace property that was damaged by a covered peril. You must report water damage that was hidden from view within 30 days of the date you first noticed it. Some companies provide a limited amount of mold remediation coverage, and other companies will allow you to buy additional coverage for mold remediation by endorsement.
The Water Damage Experts does NOT perform any repairs, replacement and reconstruction of any kind, which requires a license from the State of California. We are an IICRC Certified Water Damage Firm with over 29 years experience in emergency water damage restoration & crawlspace clean-ups. We use standard industry drying procedures in order to save our customers from the expense of further repair, replacement & reconstruction costs normally associated with water damage issues. We have a top rating of A+ & Accredited by the Better Business Bureau.
Believe it or not, there are three types of water. The first type is “clean” water from rain, condensation, leaky pipes, and so on. It’s relatively harmless to clean it up yourself. But if you decide to seek outside help, it costs around $3.75 per square foot for basic water damage cleanup (replacements not included). The second type is gray water, slightly dirty water from dishwashers, washing machines, clean toilets, and so on. And it may have some contaminants. But you can clean it up yourself if you remove it carefully and with proper safety gear to protect yourself. Professional water damage cleanup cost rises to $4.50 per square foot.

Among the most common and most preventable causes of water damage are burst pipes. Burst pipes typically happen because of clogs and freezing. Prevent the damage by finding a family plumber to do annual inspections. Regular inspections and maintenance are a cost-effective, preventative measure. Installing new plumbing typically runs between $350 to $2,000.

Whatever the mess, whether you discovered flooding from a broken or leaky pipe, damage from frozen pipes, a sewer line break, a sink or toilet overflow, or a malfunctioning appliance like a water heater, washing machine, dishwasher or refrigerator in your home, or you’re a victim of storm damage, our Hillsboro flood damage technicians are equipped to handle any problem. WaterBear is here for all water cleanup and restore your home or business back to normal, quickly and right the first time. Acting fast against flood damage can increase the chance of salvaging usable materials, reducing costs, and saving time, so we guarantee a fast response and professional guidance to help you sort out the options, work with your insurance agent and get flood cleanup and restoration underway.


From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise. It is for information purposes only. Currently, the following states regulate the offer and sale of franchises: California, Hawaii, Illinois, Indiana, Maryland, Michigan, Minnesota, New York, North Dakota, Oregon, Rhode Island, South Dakota, Virginia, Washington, and Wisconsin. If you are a resident of or want to locate a franchise in one of these states, we will not offer you a franchise unless and until we have complied with applicable pre-sale registration and disclosure requirements in your state.

You can find out how old your water heater is by looking up the serial number on the manufacturer’s sticker near the top of the water heater. Make sure to regularly inspect your water heater to check for signs of moisture build-up, mold or corrosion. If your water isn’t as hot as it used to be or there’s rust coming from your faucets, it’s time to call a plumber or water heater specialist.


Position the drywall section in the opening, and use a helper to hold the new drywall in place. Install fasteners through the drywall into the wall or ceiling framing. You can use drywall nails or drywall screws. Screws are better because they cause much less damage to the internal structure of the drywall sheet during installation. Install fasteners every 9 inches on the perimeter, and every 12 inches in the field. If necessary, use a piece of plywood or one-by lumber for a backing and fastening surface behind any drywall edges that don't fall over framing.

Ceilings exposed to water damage are more at risk due to gravity: You don’t want them sagging or collapsing. So, remove affected ceiling panels or boards first. If the ceiling leak is caused by a roof problem, it’s important to find the true source of the leak, which may be somewhere far removed from the water stain. And take this time to make sure the water caused no structural damage to beams or rafters. You can contact professionals to find out what replacing a water damaged ceiling repair cost job runs.
Insurance is offered by Safeco Insurance Company of America and/or its affiliates, with their principal place of business at 175 Berkeley Street, Boston, Massachusetts, 02116. This website provides a simplified description of coverage. Nothing stated herein creates a contract. All statements made are subject to the provisions, exclusions, conditions and limitations of the applicable insurance policy. Please refer to actual policy forms for complete details regarding the coverage discussed. If the information in these materials conflicts with the policy language that it describes, the policy language prevails. Coverages and features not available in all states. Eligibility is subject to meeting applicable underwriting criteria.
Water damage is a problem that most property owners dread. When it rains heavily or snow melts quickly, the risk of this type of damage increases. Water can cause thousands of dollars’ worth of damage by damaging wood furniture, upholstery, electronics, household appliances, and plumbing equipment. Water damage also increases the risk of mold growth, which is a very expensive problem to remediate. Hiring a water damage restoration company can make the cleanup process easier to handle, as these companies employ experienced workers who know the best ways to repair or replace damaged items and help with water damage cleanup.

When flooding happens, it would be best to call our Dallas Water Damage office right away. The faster the situation is controlled, the better chances of everything restored in their pre-loss state. Upholstered furniture, Persian carpets, oriental rugs, floor carpets, wooden cabinets, and other valuable home items will undergo full restoration by our Dallas Water Damage quality service technicians.
Sewage mitigation is one of our biggest services. If you have a sewage line that backs up, or your toilet overflows, or you have a flood that includes sewage, there are serious health concerns that come up. This type of problem must be dealt with immediately and safely, and it is not an area for amateurs. We have handled sewage problems many times over the years, and we can take care of it quickly and efficiently so that you don’t have to worry about anything.

The U.S. Navy has a similar approach when working on jet engines. Engines requiring repairs are not simply yanked from the air frame and disassembled without first creating, then discussing, the maintenance plan or objectives with the shop boss. This keeps things flowing smoothly in a hanger where there would always be several jets in various stages of repair. It was much the same as a mold shop where a group of repair technicians work on multiple molds during the day or week, sharing equipment, tools, and space.


An insurance policy may or may not cover the costs associated with water damage and the process of water damage restoration. While a common cause of residential water damage is often the failure of a sump pump, many homeowner's insurance policies do not cover the associated costs without an addendum which adds to the monthly premium of the policy. Often the verbiage of this addendum is similar to "Sewer and Drain Coverage".
×