Any mold professional should be able to explain your mold removal project in plain English.  If a contractor is unable to explain the basic processes and steps of mold remediation and mold removal in layman’s terms, be very wary!  If someone tries to complicate and confuse you about the process and scare you into hiring them, walk away and say, “Thanks, but no thanks.”
Mold can develop within 24 to 48 hours of a flood, says Ashley Small of FEMA, so remove wet contents, including carpeting and bedding, as soon as possible. If an item has been wet for less than 48 hours, it may be salvageable. However, you’ll need to decide whether it holds enough monetary or sentimental value to try to do so. And notify your insurance company before removing items to ensure that you’re not affecting coverage. Always photograph the flood-soaked items.
Category 3 Water - Known as "black water" and is grossly unsanitary. This water contains unsanitary agents, harmful bacteria and fungi, causing severe discomfort or sickness. Type 3 category are contaminated water sources that affect the indoor environment. This category includes water sources from sewage, seawater, rising water from rivers or streams, ground surface water or standing water. Category 2 Water or Grey Water that is not promptly removed from the structure and or have remained stagnant may be re classified as Category 3 Water. Toilet back flows that originates from beyond the toilet trap is considered black water contamination regardless of visible content or color.[6]

Showers, tubs, sinks, toilets, windows, and doors. Water leaks around bathtubs, showers, sinks, and toilets can cause damage because the leak is often out of sight. To prevent leaks, make sure you have a watertight seal of caulk around tubs, sinks, toilets, tubs, shower stalls, windows, and doors. Cracks or mold on caulk or tile grout may indicate that you don't have a watertight seal. Remove all caulk or grout, clean and dry the surface thoroughly, and apply fresh caulk. Don't apply new caulk or grout on top of the old materials.
To further ensure a safe and effective environmental remediation, our crews are rigorously trained in mold removal procedures approved by the Indoor Air Quality Association (IAQA); Institute of Inspection, Cleaning and Restoration Certification (IICRC);  the Restoration Industry Association (RIA); and our own in-house trainers. In addition, all of our superintendents, operations managers, project managers, project directors and regional managers  hold Certified Mold Remediation (CMR) certifications.
Nashville Water Damage Flood Repair has over 30 years of combined experience with damage restoration companies in the Nashville Tennessee area. Emergency flood repairs, water removal and extraction are all services we are highly trained in with years of experience to solve your water damage problems with creative and cost effective solutions. We help with all insurance claims, residential and commercial large loss claims as well in Murfreesboro & Franklin along with Nashville.

Water damage is a problem that most property owners dread. When it rains heavily or snow melts quickly, the risk of this type of damage increases. Water can cause thousands of dollars’ worth of damage by damaging wood furniture, upholstery, electronics, household appliances, and plumbing equipment. Water damage also increases the risk of mold growth, which is a very expensive problem to remediate. Hiring a water damage restoration company can make the cleanup process easier to handle, as these companies employ experienced workers who know the best ways to repair or replace damaged items and help with water damage cleanup.
Since you should notify your insurer soon as possible after the flood, it’s a good idea to keep your insurance company and local agent’s phone number in your always-ready emergency bag. (Note that the NFIP works through private insurance companies, so you contact your insurer just as you would for any other type of claim). In cases where a flood has affected a region or community, your agent may be busy handling his or her own flood issues. In that case, contact the insurance company’s headquarters. 
At Dallas Water Damage, we pride ourselves with superior workmanship and consistent quality of service. With our 24 hour emergency call-in service, we offer free consultation advice on our water damage services as well as our carpet cleaning options. We understand the importance of having a 100% bacteria and virus free home in order to avoid health risks for our family. That’s why, aside from water damage services, our professional technicians also perform regular household cleaning and disinfecting.
Remove all of the drywall from the wall if the wrong type of drywall was initially installed. On rare occasions, mold damage results from using the wrong type of drywall for a particular application. The two most common causes of mold damage, not created by water leaks, are drywall installed behind tile, or regular drywall installed in a bathroom instead of mold resistant drywall.
Remove all of the drywall from the wall if the wrong type of drywall was initially installed. On rare occasions, mold damage results from using the wrong type of drywall for a particular application. The two most common causes of mold damage, not created by water leaks, are drywall installed behind tile, or regular drywall installed in a bathroom instead of mold resistant drywall.
When a disaster of this magnitude occurs, the first things a plant will need are lighting and pumps. This requires the use of on-site generators and temporary power connections. It's highly recommended to not allow the plant distribution system to be back-fed. If a motor is required to turn a pump, a portable motor starter fed by the generator should be installed on a temporary panel next to the motor.
Assessing the severity of the damage is important for determining what is needed to start water damage repair and water removal. There are several different categories assigned to water damage. Category 1 refers to clean water, or water that does not pose a threat to humans. Possible causes of this type of damage include broken appliances or sink overflows. Category 2 water is also called gray water. This means that the water is contaminated and may cause sickness of ingested. This type of water contains microorganisms. Broken toilets, broken sump pumps, and seepage may cause category 2 water damage. Category 3 water is known as black water. This type of water is unsanitary, as it contains bacteria and other organisms that cause sickness. The possible sources of black water damage include sewage problems and contamination of standing water.

A dark, damp crawl space allows mold to flourish, which can then cause structural damage. Moisture dripping through the concrete foundation of your home can cause basement leaks. Air leakage into the section between the attic and the home can cause moisture on the underside of the roof, which can lead to mold and rotting. Check your home periodically, and look for light fixtures that are look as well as the overall quality of any noticeable piping.


If your water bill is unusually high, that might be an indication of an undetected leak. Buying a water leak sensor that sends alerts to your phone is one way to safeguard your home. You should also check around your toilets, tubs, showers and sinks for any soft spots or moisture. Keep an eye out for loose tiles as well. If you have a dishwasher or a refrigerator with a water line, look for warped or discolored floorboards.
When industrial facilities are faced with such a catastrophic event, specific and detailed steps must be taken to return the facility to productive operation. In the wake of this type of natural disaster, it's especially critical to analyze and repair the electrical power system in a safe and logical sequence (see SIDEBAR: Temporary and Emergency Power). Following is an overview of how to approach recovery operations of electrical equipment after a flood.
Richard Covert, FLOWER MOUND, TX, Nov 17th, 2014: What a great group of professionals! Everyone was great to work with, accommodating, understanding, sympathetic but focused on getting the mess cleaned up and getting the property ready to be put back together. What a miserable thing to have happen but thankfully there are professionals like these to help you through it. 

Keep the basement dry as it's the most common place to find damage. Flooding, burst pipes, and even clogged gutters can cause leaks. Pitching the landscape, cleaning the gutters, and installing downspout extensions are simple outdoor fixes. From the inside, install a sump pump and water alarm. Have the basement inspected for waterproofing – or have some installed.
Ceilings exposed to water damage are more at risk due to gravity: You don’t want them sagging or collapsing. So, remove affected ceiling panels or boards first. If the ceiling leak is caused by a roof problem, it’s important to find the true source of the leak, which may be somewhere far removed from the water stain. And take this time to make sure the water caused no structural damage to beams or rafters. You can contact professionals to find out what replacing a water damaged ceiling repair cost job runs.
The third type is black water, such as sewage or serious flooding from nearby rivers, etc. This water contains waste, bacteria and other serious contaminants. Black water can cause very serious health problems, and you shouldn’t try to clean it up yourself. It’s time to contact the pros for home water damage repair. Water damage cleanup cost rises to $7 per square foot.
Heavy rain, rapidly melting snow, rising rivers, and breaches in levees or dikes can cause vehicle flood damage and the need for difficult and expensive auto repairs. Once floodwaters rise above the vehicle door openings, extensive disassembly may be required for cleaning. To avoid causing additional problems, never attempt to start a flood-damaged car until a thorough vehicle inspection has been performed by a qualified technician.
Once our restoration team removes the moisture from your home or business, we then will begin repairing and restoring the property. The length of this process depends on the extent of damage. Our team of trained technicians uses all the latest technology and top industrial equipment to remove the moisture and prevent further damage. The sooner that we are contacted, the less damage can affect your property. We offer emergency services and can arrive at your home or business almost immediately. Call Mr. Restore in Dallas today for a free evaluation of the services we provide.
Once our restoration team removes the moisture from your home or business, we then will begin repairing and restoring the property. The length of this process depends on the extent of damage. Our team of trained technicians uses all the latest technology and top industrial equipment to remove the moisture and prevent further damage. The sooner that we are contacted, the less damage can affect your property. We offer emergency services and can arrive at your home or business almost immediately. Call Mr. Restore in Dallas today for a free evaluation of the services we provide.
The Water Damage Experts does NOT perform any repairs, replacement and reconstruction of any kind, which requires a license from the State of California. We are an IICRC Certified Water Damage Firm with over 29 years experience in emergency water damage restoration & crawlspace clean-ups. We use standard industry drying procedures in order to save our customers from the expense of further repair, replacement & reconstruction costs normally associated with water damage issues. We have a top rating of A+ & Accredited by the Better Business Bureau.
There are also several classes of water damage. The class of damage is important when assessing water damage repair options. Class 1 is the least harmful form of damage. Materials absorb very little of the water from this type of damage. Water damage repair is the easiest in this type of situation. Class 2 has a fast rate of evaporation, which means that carpets and cushions may be damaged. Water damage repair is more difficult when it involves class 2 damage. Class 3 has the fastest rate of evaporation. In this case, the water may come from broken sprinklers or other overhead sources, soaking the walls and furniture. Class 4 requires special water restoration and water removal procedures. This type of damage may affect hardwood floors, plaster, and concrete.

Among the most common and most preventable causes of water damage are burst pipes. Burst pipes typically happen because of clogs and freezing. Prevent the damage by finding a family plumber to do annual inspections. Regular inspections and maintenance are a cost-effective, preventative measure. Installing new plumbing typically runs between $350 to $2,000.


Most insurance policies will pay to remove mold only if it must be removed to repair or replace property that was damaged by a covered peril. You must report water damage that was hidden from view within 30 days of the date you first noticed it. Some companies provide a limited amount of mold remediation coverage, and other companies will allow you to buy additional coverage for mold remediation by endorsement.

While there are currently no government regulations in the United States dictating procedures, two certifying bodies, the Institute of Inspection Cleaning and Restoration Certification (IICRC) and the RIA, do recommend standards of care. The current IICRC standard is ANSI/IICRC S500-2015.[9] It is the collaborative work of the IICRC, SCRT, IEI, IAQA, and NADCA.
×