Today’s precision welding shops specializing in plastic injection mold, dies and tooling repair have a wide range of new technologies available to enhance their ability to provide the highest level of quality, craftsmanship, and service to their clients. One of the fastest growing technologies is the use of manual laser welding systems as an alternative to traditional microscope GTA welding.
In addition, it’s important to have a working flashlight and turn off all water and electrical sources within the home, says Dr. Maurice A. Ramirez, author of “The Complete Idiot’s Guide to Disaster Preparedness.” Even if the power isn’t operational, it’s a good idea to go to your fuse box and turn off the main, plus all of the individual fuse connections. That way, if the power is reactivated, you’re not at risk for mixing standing water and electricity.
We are the most trusted name in property damage restoration because we don’t outsource and you can trust our workers when they are in your home. They are specially trained and industry certified. You will be assigned a Project Manager who will walk you through the entire process step-by-step.  The team leader is plugged into your job every single day. No exceptions.

Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 


When it comes to a flood or water damage emergency in your home, every minute counts. If floodwater inside your home is not dealt with quickly, your walls, as well as your carpet, flooring, ceiling and personal property can quickly become waterlogged and damaged beyond repair. Flooded zones can quickly become unsafe for human exposure. Consider that dangerous bacteria begin to multiply in wet environments, not to mention rot and mold growth. All it takes is a few inches of water to create a serious threat to your home or office. The harmful effects of water damage can be reduced greatly by the prompt and reliable emergency flood services from Roto-Rooter.
After a mold has been cleaned, repaired, changed over, and final-checked, it needs to be given a new status and moved to one of three areas—typically racked in holding/storage area, reset in the press, or staged as a back-up mold in a molding-cell operation. It could also go to an outside vender for rebuild or production. You should know where your molds are.
There are several possible causes of water damage. Leaky dishwashers, clogged toilets, broken pipes, broken dishwasher hoses, overflowing washing machines, leaky roofs, plumbing leaks, and foundation cracks are just some of the possible causes of water damage in homes and businesses. Floods, heavy snow, and heavy rain are other possible causes of this type of damage and can lead to having water in basements. Too much water can lead to minor problems such as water in basement areas, or it can lead to the destruction of homes and businesses. Once a home or business sustains water damage, it is important to start the water damage cleanup immediately. Starting water damage cleanup as soon as possible increases the likelihood of saving water-soaked furniture, carpets, rugs, clothing, and other items.
If you have a replacement cost policy, most insurance companies pay claims with two checks. The insurance company will give you the first check after the adjuster has reviewed your damage. This check will be for the estimated cost of repairs, minus depreciation and your deductible. A deductible is the amount of the claim that you're responsible for paying yourself. Review your policy or ask your agent or adjuster if you don't know how much your deductible is.
Wanna keep things really cheap? Do it yourself! In some cases, minor mold problems (less than about 10 square feet of mold) in places like a bathroom corner can easily be handled by a handy homeowner with a free weekend afternoon and a few basic supplies from the hardware store. For more information, see our previous post on the subject: Do I need a Mold Remediation Professional?
Regular cleaning may maintain household furniture’s upkeep but with Dallas Water Damage’s advanced cleaning technology, our technicians can fully restore your furniture in their brand new state while keeping them free from bacteria and viruses that may cause common health problems. Our competitive pricing options vary depending on your water damage and professional cleaning needs. You may call our 24 hour emergency call-in service for a free estimate today.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.

Once you’ve pulled away wet materials and established holes or cuts in the wall as needed, you’ll typically need one air mover for every 15 – 25 square feet of floor, unless the moisture load and density is particularly high, then you may need more. To prevent mold, make sure all of the layers and materials are dry before putting everything back together.
Clean water that originated from a source that does not pose substantial harm to humans. Examples include: broken water supply lines, melting ice or snow, falling rainwater, broken toilet tanks, and toilet bowls that do not contain contaminants or additives. Clean water may deteriorate with time as it dissolves or mixes with soils and other contaminants.

While the mold was still being disassembled, two “cleaners” began pulling tooling out of plates and putting them into buckets in preparation for a good scrubbing—and I mean a scrubbing. Immersing the buckets into a solvent tank, they used their hands like wire whisks as they swished the close-tolerance ejector sleeves around, effectively removing any trace of vent residue or “track” marks on the tooling—and in the process maybe adding some marks of their own.

The first order of business in assessing water damage to the electrical equipment in any industrial plant is to gather all pertinent drawings and documentation available and perform a walkthrough of the entire electrical infrastructure. However, at times, drawings and documentation may not be available due to destruction (Photo 1). In this case, walkthroughs must be performed through tribal knowledge of plant personnel. Keep in mind the initial assessment is preliminary in nature, and an absolute understanding of the damage will not be gained until the equipment is disassembled in its entirety.
Our professional technicians have been trained, experienced, and certified to restore water damaged furniture, household items, and rugs to their original pre-loss conditions. If you’ve had water damage, call our 24 hour call-in emergency service department and our technicians will be right over in 30 minutes or less. Every minute counts in water damage restoration and we sure don’t want to waste any of it that’s why we have full operations 24 hours a day, 7 days a week, 365 days a year.

After a mold has been cleaned, repaired, changed over, and final-checked, it needs to be given a new status and moved to one of three areas—typically racked in holding/storage area, reset in the press, or staged as a back-up mold in a molding-cell operation. It could also go to an outside vender for rebuild or production. You should know where your molds are.
When flooding happens, it would be best to call our Dallas Water Damage office right away. The faster the situation is controlled, the better chances of everything restored in their pre-loss state. Upholstered furniture, Persian carpets, oriental rugs, floor carpets, wooden cabinets, and other valuable home items will undergo full restoration by our Dallas Water Damage quality service technicians.
Despite what you might think, a flooded home can be saved rather than razed to the ground, but removing the moisture quickly is key. "The biggest thing is getting in there and getting it cleaned up quickly," says Robyn Kent, claims administrator at Dalworth Restoration, based in Euless, TX. "Closer to the three- to five-day mark is when it becomes questionable, since by then, all the materials have become fragile."
If the home is habitable, take precautions to keep yourself and your family safe from injury. Use flashlights to move around dark rooms, for example. If the home isn’t habitable, don’t try to stay there. Move to a shelter or alternate location. Consult your insurer to find out what provisions the company will make for temporary housing while your home is being repaired.
Once you discover moisture, your first instinct may be to open windows to help with the drying process, but it may not be your best move. For example, if your building is mechanically ventilated, the systems need constant pressure levels to work correctly. You also want to avoid excess coolness or heat and humidity, or you may end up complicating the drying process.
×