Unlike sites which blend pricing from dissimilar jobs, Homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.

Position the drywall section in the opening, and use a helper to hold the new drywall in place. Install fasteners through the drywall into the wall or ceiling framing. You can use drywall nails or drywall screws. Screws are better because they cause much less damage to the internal structure of the drywall sheet during installation. Install fasteners every 9 inches on the perimeter, and every 12 inches in the field. If necessary, use a piece of plywood or one-by lumber for a backing and fastening surface behind any drywall edges that don't fall over framing.
It’s time for one of the most important steps: removing any standing water from the home. The removal process is actually much less complicated than you may think. Contractors use fancy shop vacuums and rotate them around the room, sucking up all the water that’s present in the area. The amount of time this phase takes varies depending on the type of substrate that’s being dried, the size of the room and the total amount of water that’s present.
Today’s precision welding shops specializing in plastic injection mold, dies and tooling repair have a wide range of new technologies available to enhance their ability to provide the highest level of quality, craftsmanship, and service to their clients. One of the fastest growing technologies is the use of manual laser welding systems as an alternative to traditional microscope GTA welding.
This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise. It is for information purposes only. Currently, the following states regulate the offer and sale of franchises: California, Hawaii, Illinois, Indiana, Maryland, Michigan, Minnesota, New York, North Dakota, Oregon, Rhode Island, South Dakota, Virginia, Washington, and Wisconsin. If you are a resident of or want to locate a franchise in one of these states, we will not offer you a franchise unless and until we have complied with applicable pre-sale registration and disclosure requirements in your state.
"One of the biggest problems—especially in Houston in the summer—is going to be mold," says Tyler Drew, a Los Angeles real estate agent and investor. "The longer a house sits with water, the worse the mold infestation. Affected areas have to be removed, the wood and concrete treated with anti-mold agents, and all of this has to be done after the house is sealed, in order to prevent the infestation from spreading and sickening people."

Water damage is a problem that most property owners dread. When it rains heavily or snow melts quickly, the risk of this type of damage increases. Water can cause thousands of dollars’ worth of damage by damaging wood furniture, upholstery, electronics, household appliances, and plumbing equipment. Water damage also increases the risk of mold growth, which is a very expensive problem to remediate. Hiring a water damage restoration company can make the cleanup process easier to handle, as these companies employ experienced workers who know the best ways to repair or replace damaged items and help with water damage cleanup.
"Using truck-mounted vacuums with 2,000 horsepower, and dehumidifiers, we can extract moisture from furniture, hardwood, tile, even Sheetrock," Kent says. Even electronics like TVs and laptops may still operate after a thorough drying. "In fact, when carpet gets wet, people think it's ruined, but it actually ends up stronger than when it was made," Kent says.
The average homeowner spends $7.00 per square foot for professional cleanup. That does not include the amounts for repairing and replacing items. Typically, anything that can absorb the contaminants in black water should be replaced, including upholstered furniture, beds, carpets, clothing, and all permeable building materials. Replacement is often more cost effective than restoration.

Pipes that burst or leak are common culprits of water damage. Drains and toilets that get backed up and blocked can cause undue pressure in the pipe, which then causes it to burst or leak. Garbage disposals that aren’t working properly are another common reason for pipes to burst, as are roots that grow in the yard into the sewer lines. Old or rusty pipes are also more prone to leaking.
High-quality mold repairs are consistently achieved with the DME ProWeld Micro-Welding System from Milacron. ProWeld provides precision results that increase mold life after every repair. The system is safe and easy to operate, and reduces repair costs by up to 85% with special metal alloys developed for all conventional types of steel. The ProWeld System emits almost no heat and is suitable for all forms of mold damage. There is no need for other types of welding (i.e. TIG, argon, laser welding) so the system emits no harmful welding fumes or toxic gases. Many customers report that the ProWeld System returns its investment cost well within a year of its purchase.
Sewage mitigation is one of our biggest services. If you have a sewage line that backs up, or your toilet overflows, or you have a flood that includes sewage, there are serious health concerns that come up. This type of problem must be dealt with immediately and safely, and it is not an area for amateurs. We have handled sewage problems many times over the years, and we can take care of it quickly and efficiently so that you don’t have to worry about anything.
Surface molds grow in just about any damp location, such as the grout lines of a ceramic tiled shower. They’re easy to scrub away with a mold cleaner mixture of 1/2 cup bleach, 1 qt. water and a little detergent. In mold remediation, the bleach in the cleaning mixture kills the mold, and the detergent helps lift it off the surface so you can rinse it away so it won’t return as fast. You can also buy a mildew cleaner at hardware stores, paint stores and most home centers.
Alameda, Antioch, Berkeley, Burlingame, Campbell, Concord, Daly City, Danville, Fremont, Foster City, Hayward, Hillsborough, Los Gatos, Los Altos, Menlo Park, Monterey, Morgan Hill, Mountain View, Oakland, Palo Alto, Piedmont, Pleasanton, Pacifica, Redwood City, Richmond, San Carlos, San Francisco, San Jose, San Leandro, San Mateo, San Ramon, Santa Clara, Santa Cruz, South San Francisco, Saratoga, Walnut Creek

The first order of business in assessing water damage to the electrical equipment in any industrial plant is to gather all pertinent drawings and documentation available and perform a walkthrough of the entire electrical infrastructure. However, at times, drawings and documentation may not be available due to destruction (Photo 1). In this case, walkthroughs must be performed through tribal knowledge of plant personnel. Keep in mind the initial assessment is preliminary in nature, and an absolute understanding of the damage will not be gained until the equipment is disassembled in its entirety.


Clean water that originated from a source that does not pose substantial harm to humans. Examples include: broken water supply lines, melting ice or snow, falling rainwater, broken toilet tanks, and toilet bowls that do not contain contaminants or additives. Clean water may deteriorate with time as it dissolves or mixes with soils and other contaminants.
Type depends on the source and extent to which it has affected the home. Sources can range from clean water from a burst pipe to black water from sewage backup. Cleanup ranges from $3.75 to $7.00 per square foot. Repairs range from $450 to $7,000. Again, these vary widely depending on the source and extent of damage, whether it's a flooded basement, leaky toilet, or damaged roof.

Unless you’re doing laundry, you probably don’t think twice about your washing machine. But if it breaks down, the results could be catastrophic. For example, if the supply hose is damaged or has a faulty connection to the wall or washing machine, more than 600 gallons of water could potentially spill out within an hour. That could lead to significant water damage, especially if your washing machine is located on the second floor of your home.

Dealing with disasters such as flooding, fire, sewage, and more can be stressful. Often, these situations occur unexpectedly – do you know who to call if it happens to you? 1-800 WATER DAMAGE is the trusted name in restoration services. We have over a decade of industry-leading experience and are backed by BELFOR, the world’s largest property restoration company. Our highly-trained professionals have the tools and knowledge necessary to get your property looking like new again.
×