Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
All water damage restoration jobs are unique and the amount of work required for each depends on a variety of factors such as the amount of area in the home that’s been damaged and how long the water has been present. Once a professional water damage cleanup vendor arrives and has a chance to inspect the home, they’ll be able to put together a detailed project timeline specific to your job. In the meantime, we’ve listed the eight common phases that occur during the water damage restoration process and what happens in each, so you’ll know what to expect.
Laser is an acronym for “Light Amplification by the Stimulated Emission of Radiation.” This technology produces a sharply focused beam of hot light that melts a very small area of metal and can be used to join similar or dissimilar alloys. The laser welding process can be performed quickly (normally in milliseconds) and does not scar or blemish the welding surface. In fact, by adjusting the laser’s beam diameter, a smooth, near polished finish can be achieved with the laser welder. Since very little heat is generated at the weld point, users can easily weld 0.10mm away from the most complicated and intricate machined patterns, polished surfaces and removable component assemblies.
It’s important to get rid of all moisture ASAP before it causes more damage. And for small leaks, this may not be difficult, but it’s important to be thorough. Use fans to circulate air in the affected area. For larger projects, consider renting a large-capacity dehumidifier to really dry out surrounding wood, carpet, and other materials. You don’t want any moisture left after your water damage repair.
Ice dams and other roof problems can also cause water damage to siding materials as well. Here, the biggest danger is water seeping in behind your siding and causing permanent damage to more vulnerable materials. So if this happens, you will need to remove or replace the siding quickly before rot sets in. Water can also seep in behind faux stone and other external walls around your home. So it’s important to be thorough in this inspection.
The electrical systems in modern cars are particularly prone to flood water damage. Engine control computers, vehicle sensors, infotainment systems, and other electronic devices – along with wiring harnesses and the many connectors that join them together – can be very difficult to salvage. Unless every part is thoroughly cleaned and dried, inside and out, problems caused by corrosion can crop up weeks or even months after the flooding.
Dalworth Restoration Crews are certified through the IICRC and receive specialized training at our Dallas/Fort Worth Restoration Facility. Our technicians are trained to professionally perform water damage restoration services according to the best practices and ANSI/IICRC S500 standards. Technicians are available 24/7 for emergency water removal, cleanup and content repair, as well as rebuild and restore your water or flood damaged property to pre-loss condition.
To prevent water damage, you should replace your washing machine supply hose at least once every five years. Also, resist the temptation to overload your washing machine. Constantly stuffing too many clothes into your washing machine could loosen gaskets and valves or cause cracks. Take good care of your washing machine and your washing machine will take good care of you.
Working with insurance companies to cover your water damage repair can be a tiring and frustrating process. You need to be aware of the specifics in your insurance policy. Most companies require you to report and repair water damage in a timely manner in order to cover the costs. At Peniel, we have years of experience working with billing insurance companies. We are happy to be an advocate for you during this trying process.
Molds should never be arbitrarily disassembled without a specific level in mind. To do so is to invite excessive handling of tooling components or over-maintaining a mold, which increases the opportunity for damage and wastes man-hours. Time-based mold disassembly levels (based on cycles, hours, days, or parts produced) should be established to optimize bench time.
Roofs should be inspected annually. A professional roof contractor can look for exterior and interior warning signs that your roof’s condition may lead to water damage, including cracked or missing shingles and areas where water is prone to pool. An inspection can cost several hundred dollars, but in exchange for your peace of mind, it’s priceless.
Our plumbing and water damage restoration experts are well-trained and knowledgeable in handling a water damage emergency whenever the situation strikes. Our trained professionals receive the Institute of Inspection, Cleaning and Restoration Certification (IICRC) and they’ll always perform emergency water damage services in compliance with the highest standards for professional water damage restoration. Roto-Rooter’s vehicles are fully equipped with state-of-the art water extraction, drying and moisture testing equipment to handle everything including:
If it snows where you live, be wary about the formation of ice dams on your roof. This happens when the heat inside your home causes water to melt in the middle of your roof. The water then refreezes near the edges, forming a dam that prevents melting snow from draining off the roof. The water that backs up can leak into your home and damage ceilings, walls and other areas of your home. To prevent ice dams from forming, insulate your attic to keep heat from rising and reaching the roof.
Once help arrives, the first thing a water mitigation contractor will do is inspect the home and evaluate the damage. In order to properly evaluate the damage, they have special tools and instruments they use to measure the moisture content of the home. To do this, they either poke or rest the instruments on top of surfaces like floors, baseboards and ceilings in the damaged rooms to get an accurate reading. Depending on the moisture content readings and Institution of Inspection Cleaning and Restoration Certification (IICRC) dry standards for the state you live in, your contractor will assess if drying equipment is needed.
Once any standing water has been removed, it’s time to start drying out the home. Your contractor will bring in different types of air movers (think of these like glorified fans) to help circulate airflow throughout the room. Don’t be surprised if they need to lift up a section of the carpet or position one of the air movers at certain sections of the walls to ensure air is getting to the most saturated parts of the room. If you have hardwood floors, they may use floor mats which help draw the water out of the floor. If needed, they might even remove the baseboards and drill holes into the drywall to help the walls dry faster. While some of these methods may sound extreme, they’re making every effort to dry the home without having to demolish and rebuild, which could add multiple weeks to the project timeline and become very costly.
A flood-damaged car that has been totaled should have a “salvage” title, but some sellers use lax registration procedures in certain states to “launder” titles and eliminate the salvage branding. Buyers should also know that flood-damaged vehicles can be shipped anywhere for resale, and continue to appear in the marketplace for many months following major floods.
The water restoration process is an important one. Using the right procedures and materials can help people save cherished belongings and even prevent their homes from being condemned. Water restoration companies specialize in mitigating the effects of water, but the success for water damage restoration depends on the severity of the damage and the amount of water that caused the damage. Water restoration companies may hire outside experts to assess a property and determine a water restoration and water removal plan. These water restoration companies typically use high-tech equipment and well-documented procedures to control water damage. Water in basement areas may only require a short cleanup process, but water in other areas of a property will require extensive remediation.
Everything could be fine in your house as you sleep at night. However, it only takes a broken pipe, water heater, washing machine, fire, or a sudden major storm, to cause major water damage to your home. When you are overwhelmed with water you need to do something about it now, and you can depend on your water damage restoration professionals to be there when you need them.
Regular cleaning may maintain household furniture’s upkeep but with Dallas Water Damage’s advanced cleaning technology, our technicians can fully restore your furniture in their brand new state while keeping them free from bacteria and viruses that may cause common health problems. Our competitive pricing options vary depending on your water damage and professional cleaning needs. You may call our 24 hour emergency call-in service for a free estimate today.
Fire and Water Restoration companies are regulated by the appropriate state's Department of Consumer Affairs - usually the state contractors license board. In California, all Fire and Water Restoration companies must register with the California Contractors State License Board. Presently, the California Contractors State License Board has no specific classification for "water and fire damage restoration."