BRAVO – job well done! Discovered a flood at home in San Francisco – water had been over flowing a 2nd floor sink for 15 hours. Contacted Allied, signed work order on line and workers were at the house within 15 minutes. They brought a truck load of equipment to mitigate the damage. Drying fans were installed, heating pads were placed on hardwood floors, walls and ceilings were opened and drying and dehumidifying tubes installed. Excellent, professional care. Very pleased with their swift delivery of emergency service AND their attention to detail to ensure the water damage was dried out completely.

Locate and repair the source of the leak. The source of the problem is usually apparent once you remove the drywall and expose the framing. If the leak source is not easily determined, consult a licensed contractor before you replace the drywall. You must repair the cause of the leak or mold and mildew will eventually reform over the new drywall. An unresolved leak may also create additional damage to framing, insulation, siding and flooring.
Expert Rytech technicians will apply state-of-the-art drying process techniques to your property and issue a full written report to Olympus upon completion. Rytech gives you the added security and assurance of specialists who carry visible identification, arrive in clearly marked Rytech vehicles, and wear protective footwear to avoid soiling undamaged areas of your property.
Unlike sites which blend pricing from dissimilar jobs, Homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.
Heavy rain, rapidly melting snow, rising rivers, and breaches in levees or dikes can cause vehicle flood damage and the need for difficult and expensive auto repairs. Once floodwaters rise above the vehicle door openings, extensive disassembly may be required for cleaning. To avoid causing additional problems, never attempt to start a flood-damaged car until a thorough vehicle inspection has been performed by a qualified technician.
Want to avoid large cleanup and repair bills? Preventative maintenance and cleaning up quickly after damage are critical to keeping costs down. How long moisture is left untreated increases the scope of the damage and allows mold to grow. Preventing damage by contacting professionals to diagnose causes and make small repairs can save thousands later. Regardless of cause or cost, always document the damage for insurance claims.
Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.

Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 
If you can already see it, you usually do NOT need to spend money on pre-testing mold. Plain and simple: you just need to remove it. Since no visible mold growth belongs in a healthy home (no matter what the type) and all mold should be removed the same way, there is usually no need to identify what types and concentrations of mold you have via testing.
Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.
After a mold has been cleaned, repaired, changed over, and final-checked, it needs to be given a new status and moved to one of three areas—typically racked in holding/storage area, reset in the press, or staged as a back-up mold in a molding-cell operation. It could also go to an outside vender for rebuild or production. You should know where your molds are.

Water damage restoration is often prefaced by a loss assessment and evaluation of affected materials. The damaged area is inspected with water sensing equipment such as probes and other infrared tools in order to determine the source of the damage and possible extent of area affected. Restoration services would then be rendered to the residence in order to dry the structure, sanitize any affected or cross-contaminated areas, and deodorize all affected areas and materials. After the labor is completed, water damage equipment including air movers, air scrubbers, dehumidifiers, wood floor drying systems, and sub-floor drying equipment is left in the residence. Industry standards state that drying vendors should return at regular time intervals, preferably every twenty-four hours, to monitor the equipment, temperature, humidity, and moisture content of the affected walls and contents.[6]
×