The water restoration process is an important one. Using the right procedures and materials can help people save cherished belongings and even prevent their homes from being condemned. Water restoration companies specialize in mitigating the effects of water, but the success for water damage restoration depends on the severity of the damage and the amount of water that caused the damage. Water restoration companies may hire outside experts to assess a property and determine a water restoration and water removal plan. These water restoration companies typically use high-tech equipment and well-documented procedures to control water damage. Water in basement areas may only require a short cleanup process, but water in other areas of a property will require extensive remediation.
“Last December we discovered a leak underneath our kitchen that caused extensive damage. We called WaterBear and they came out that day. The people who came to our house were always respectful, kind and efficient. They did exactly what they quoted us and did it in a timely manner. All of our questions and concerns were answered in a timely manner, also.   They helped us through this very difficult situation. I hope we never have another problem like this, but if we did, I would call WaterBear.” – Anne M.
The European-American community was founded by David Hill, Isaiah Kelsey, and Richard Williams, who arrived in the Tualatin Valley in 1841, followed by six more pioneers in 1842. The locality went by two other names—East Tualatin Plains and Columbia—before it was named “Hillsborough” in February 1850 in honor of Hill, when he sold part of his land claim to the county.
"One of the biggest problems—especially in Houston in the summer—is going to be mold," says Tyler Drew, a Los Angeles real estate agent and investor. "The longer a house sits with water, the worse the mold infestation. Affected areas have to be removed, the wood and concrete treated with anti-mold agents, and all of this has to be done after the house is sealed, in order to prevent the infestation from spreading and sickening people."
To further ensure a safe and effective environmental remediation, our crews are rigorously trained in mold removal procedures approved by the Indoor Air Quality Association (IAQA); Institute of Inspection, Cleaning and Restoration Certification (IICRC);  the Restoration Industry Association (RIA); and our own in-house trainers. In addition, all of our superintendents, operations managers, project managers, project directors and regional managers  hold Certified Mold Remediation (CMR) certifications.

Even a competent DIYer should have a qualified professional assess the damage first — making sure no part of the cleanup is missed. Before doing anything, check with your insurance company — they may require a licensed assessment. Don't wait. As soon as you detect any damage, call a professional. With time, each class and category quickly degrades into something worse.


When you’re sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. Then install new insulation and drywall and nail the trim back on. And keep in mind that if the moisture returns, mold will return.
Even if the water in your home is clear, it could be contaminated by sewage or household chemicals. Ramirez recommends wearing waders, hip- or waist-high waterproof boots. In addition, wear rubber gloves to remove water-damaged possessions and to avoid contaminants, Ramirez notes. Be sure to throw out any food that may have come into contact with flood waters. FEMA recommends boiling water until authorities declare the water supply is safe.

Indoor and outdoor pipes and faucets. Routinely check indoor pipes under cabinets and sinks for leaks, rust, and any signs of deterioration. Minimize the potential for water damage from frozen and broken outdoor pipes by insulating supply lines (in attics, crawlspaces, and exterior walls), protecting exposed outdoor faucets, sealing gaps in exterior walls, and maintaining adequate heat in your home.


Even if the water in your home is clear, it could be contaminated by sewage or household chemicals. Ramirez recommends wearing waders, hip- or waist-high waterproof boots. In addition, wear rubber gloves to remove water-damaged possessions and to avoid contaminants, Ramirez notes. Be sure to throw out any food that may have come into contact with flood waters. FEMA recommends boiling water until authorities declare the water supply is safe.


Flooding in a home can lead to more problems than just water damage and health issues, it can also cause rusted pipes and mold growth.  We use water detection probes and sensors to find these hidden flood damage problems so that we can repair them as part of the restoration process.  You can be confident that our flood damage restoration experts will be thorough and complete and if you made an insurance claim, we can help you coordinate the payment with your insurance provider.
After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.

Water damage restoration is often prefaced by a loss assessment and evaluation of affected materials. The damaged area is inspected with water sensing equipment such as probes and other infrared tools in order to determine the source of the damage and possible extent of area affected. Restoration services would then be rendered to the residence in order to dry the structure, sanitize any affected or cross-contaminated areas, and deodorize all affected areas and materials. After the labor is completed, water damage equipment including air movers, air scrubbers, dehumidifiers, wood floor drying systems, and sub-floor drying equipment is left in the residence. Industry standards state that drying vendors should return at regular time intervals, preferably every twenty-four hours, to monitor the equipment, temperature, humidity, and moisture content of the affected walls and contents.[6]
×