Wear a respirator or a facemask rated for black mold spore protection, and cover arms, legs and hands to avoid contact with mold spores. Use soap and a sponge to remove visible mold. If the moldy area is dry, lightly spray with water, as this will reduce the incidence of airborne mold spores during cleaning. Next, use commercial black mold removal products, which can be found in most hardware or home repair stores, to disinfect the moldy areas, in addition to any adjacent areas. If you use bleach, make sure it won't discolor the material or surface. Place all sponges, equipment and other materials used in cleaning in a heavy duty garbage bag, and if possible, remove the bag through an nearby exit as opposed to the main house, to avoid distributing mold spores.
It is possible to recover from a catastrophic event with a more reliable system than before. However, the speed and efficiency of the recovery will depend on the availability and accuracy of documentation. In preparation or planning for the recovery of an electrical system, the facility should ensure that all drawings/documentation are up to date and a copy is kept in a safe location that can be accessed after the event.
Water is pumped out of your home or property to our recovery tank mounted inside our truck, ready for proper disposal. Standing water is removed, allowing our water extraction team inside your property to assess damage to all structures, furniture, and personal items, inspect your property to traces of mold, and to set up equipment designed to quickly dry the property.
Laser is an acronym for “Light Amplification by the Stimulated Emission of Radiation.” This technology produces a sharply focused beam of hot light that melts a very small area of metal and can be used to join similar or dissimilar alloys. The laser welding process can be performed quickly (normally in milliseconds) and does not scar or blemish the welding surface. In fact, by adjusting the laser’s beam diameter, a smooth, near polished finish can be achieved with the laser welder. Since very little heat is generated at the weld point, users can easily weld 0.10mm away from the most complicated and intricate machined patterns, polished surfaces and removable component assemblies.
Throughout the drying process, crews will stop by periodically to monitor how the drying is progressing. Specifically, they monitor the dehumidifiers’ intake and output temperatures and humidity levels to make sure the dehumidifiers aren’t putting wet air out into the room. They’ll also go back and take readings of the same surfaces they did during the inspection phase. As rooms are declared dry, crews will often move equipment around to other areas of the home that are still wet.
It’s important to get rid of all moisture ASAP before it causes more damage. And for small leaks, this may not be difficult, but it’s important to be thorough. Use fans to circulate air in the affected area. For larger projects, consider renting a large-capacity dehumidifier to really dry out surrounding wood, carpet, and other materials. You don’t want any moisture left after your water damage repair.

Inspect damaged materials for mold and mildew. Mold can start to grow in the right conditions in as little as 24 hours. For long-term issues, like mold caused by attic condensation, the mold may have started growing a long time ago. And if you find mold and mildew issues, you need to be very careful. Some mold is toxic to humans, and all mold is very damaging to the materials it infests. For small mold issues, cut out the material, bag it, and throw it away immediately. For serious mold issues, get out of the area, shut down any airflow (to avoid spore contamination) and call a professional. And keep in mind that mold can show up in hidden areas like inside walls or under floors, so this inspection and water damage repair will be ongoing.
Molds should never be arbitrarily disassembled without a specific level in mind. To do so is to invite excessive handling of tooling components or over-maintaining a mold, which increases the opportunity for damage and wastes man-hours. Time-based mold disassembly levels (based on cycles, hours, days, or parts produced) should be established to optimize bench time.
What do you do when you have a flood in your home? Call a company you can trust. Dalworth's water damage and restoration professionals are certified, bonded and insured for your security and peace of mind. Our experts understand the last thing you need is more stress when your home or business floods. Whether it's a water leak from a burst kitchen pipe or flooding from a natural disaster, contact Dalworth Restoration for your water damage restoration, water cleanup and removal or disaster cleanup services in your North Texas town.

High-quality mold repairs are consistently achieved with the DME ProWeld Micro-Welding System from Milacron. ProWeld provides precision results that increase mold life after every repair. The system is safe and easy to operate, and reduces repair costs by up to 85% with special metal alloys developed for all conventional types of steel. The ProWeld System emits almost no heat and is suitable for all forms of mold damage. There is no need for other types of welding (i.e. TIG, argon, laser welding) so the system emits no harmful welding fumes or toxic gases. Many customers report that the ProWeld System returns its investment cost well within a year of its purchase.


The information in this publication is current as of the revision date. Changes in laws and agency administrative rules made after the revision date may affect the content. View current information on our website. TDI distributes this publication for educational purposes only. This publication is not an endorsement by TDI of any service, product, or company.
Water damage is a serious problem that needs immediate attention fast. The faster water damage is treated, the more furniture and valuable items are saved from permanent damage. Water damage may happen at any time and the most common cause is flooding. Floods may be caused by natural disasters such as hurricanes and excessive rainfall. Sometimes flooding may occur due to leaking faucets, broken sewage pipes, and waste buildup under sink drains.

There are several possible causes of water damage. Leaky dishwashers, clogged toilets, broken pipes, broken dishwasher hoses, overflowing washing machines, leaky roofs, plumbing leaks, and foundation cracks are just some of the possible causes of water damage in homes and businesses. Floods, heavy snow, and heavy rain are other possible causes of this type of damage and can lead to having water in basements. Too much water can lead to minor problems such as water in basement areas, or it can lead to the destruction of homes and businesses. Once a home or business sustains water damage, it is important to start the water damage cleanup immediately. Starting water damage cleanup as soon as possible increases the likelihood of saving water-soaked furniture, carpets, rugs, clothing, and other items.
Before any mold is released for production (“blue-tagged”), it is imperative to put the mold through a series of final-check bench procedures to verify “All Systems Go” and minimize any opportunities for the mold to be stopped and returned to the shop for something that should have been caught before it was released. Water leaks, heater problems, etc., can be avoided with a final-check procedure.
Once a region has been officially declared a “disaster area” by government authorities, property owners have access to increased resources, including public services to protect and remediate the area. In addition, you may have access to financial assistance. Your insurance company will have additional information on this or you can contact FEMA directly.

The U.S. Navy has a similar approach when working on jet engines. Engines requiring repairs are not simply yanked from the air frame and disassembled without first creating, then discussing, the maintenance plan or objectives with the shop boss. This keeps things flowing smoothly in a hanger where there would always be several jets in various stages of repair. It was much the same as a mold shop where a group of repair technicians work on multiple molds during the day or week, sharing equipment, tools, and space.

Public insurance adjusters are independent adjusters who help people negotiate claims with their insurance companies. Public adjusters work for you, not the insurance company. They charge you a fee for their services. The fee is usually a percentage of the claim and is subtracted from any settlement you get from your insurance company. You don't have to hire a public adjuster.
It’s time for one of the most important steps: removing any standing water from the home. The removal process is actually much less complicated than you may think. Contractors use fancy shop vacuums and rotate them around the room, sucking up all the water that’s present in the area. The amount of time this phase takes varies depending on the type of substrate that’s being dried, the size of the room and the total amount of water that’s present.
AAA recommends that you plan ahead for vehicle service by finding an auto repair shop and technician you can trust before you need them. AAA.com/AutoRepair provides information on nearly 7,000 Approved Auto Repair facilities that have met AAA’s high standards for appearance, technician training and certification, insurance coverage and customer satisfaction. AAA regularly inspects every Approved Auto Repair facility and surveys their customers to ensure ongoing performance. In addition, AAA members receive special benefits that include auto repair discounts, an extended 24-month/24,000-mile parts and labor warranty, and AAA assistance in resolving repair-related issues.
Dalworth Restoration Crews are certified through the IICRC and receive specialized training at our Dallas/Fort Worth Restoration Facility. Our technicians are trained to professionally perform water damage restoration services according to the best practices and ANSI/IICRC S500 standards. Technicians are available 24/7 for emergency water removal, cleanup and content repair, as well as rebuild and restore your water or flood damaged property to pre-loss condition.
As soon as you have a water emergency on your hands, all you need to do is call your water restoration company. They are available 24 hours a day and 7 days a week because they know that water emergencies can happen any time of the night or day. Your restoration professionals start to work immediately to stop any further damage from happening to your home.
Restoration dehumidifiers are an important piece of restoration drying equipment. Humid environments are ripe for the development of mold and bacteria, so drying them quickly and effectively is important. You can find a wide range of different types of dehumidifiers, varying in size and capacity and the choosing the right one will depend on the types of environments in which they are used.
×