The water restoration process is an important one. Using the right procedures and materials can help people save cherished belongings and even prevent their homes from being condemned. Water restoration companies specialize in mitigating the effects of water, but the success for water damage restoration depends on the severity of the damage and the amount of water that caused the damage. Water restoration companies may hire outside experts to assess a property and determine a water restoration and water removal plan. These water restoration companies typically use high-tech equipment and well-documented procedures to control water damage. Water in basement areas may only require a short cleanup process, but water in other areas of a property will require extensive remediation.
Damage from long standing water falls in this class, like river flooding or storm surges from a hurricane. It has saturated materials such as stone, brick, and hardwood. These materials have low permeance — meaning they do not soak up liquids quickly. Time is the primary factor in this category. With a higher cost of cleanup and repair, it is important to get problems diagnosed and solved as quickly as possible.
Drywall repair cost about $500 on average with a typical range of $250 to $750, but can cost much more or less depending on the destruction. It is used in most modern homes and is found in almost all finished areas of a house, including bathrooms. When it becomes wet, it typically needs to be replaced. Not only is the drywall itself ruined, but the wet paper backer of the drywall becomes an excellent environment for mold growth.
Our water extraction team offers water extraction services for any home, apartment building, office building, retail store, warehouse, commercial property, condominium, hotel, motel or any other structure that may be in need. Do not hesitate to call our offices to discuss your water extraction needs, no matter how large or how small. We will be happy to discuss your options, the services we offer, and our insurance claims process.
The insurance company will pay to repair your home with materials of like kind and quality to the original. For example, if the carpet was damaged, the insurance company will pay to replace the damaged carpet with carpet of a similar grade and quality. If you choose to upgrade the carpet or change the type of flooring, you will have to pay the extra costs yourself.
Richard Covert, FLOWER MOUND, TX, Nov 17th, 2014: What a great group of professionals! Everyone was great to work with, accommodating, understanding, sympathetic but focused on getting the mess cleaned up and getting the property ready to be put back together. What a miserable thing to have happen but thankfully there are professionals like these to help you through it. 
Also, a combination of moisture and humidity can cause mold to grow as well as any unrepaired water leaks. For instance, if the your air conditioning unit is set to a temperature that causes condensation on your windows then common sense should tell you that your windows may not be the only places with condensation or moisture. (between the walls) If there is already mold growing, these temperatures that cause condensation will only feed the mold to grow.
Our professional technicians have been trained, experienced, and certified to restore water damaged furniture, household items, and rugs to their original pre-loss conditions. If you’ve had water damage, call our 24 hour call-in emergency service department and our technicians will be right over in 30 minutes or less. Every minute counts in water damage restoration and we sure don’t want to waste any of it that’s why we have full operations 24 hours a day, 7 days a week, 365 days a year.
Sewage mitigation is one of our biggest services. If you have a sewage line that backs up, or your toilet overflows, or you have a flood that includes sewage, there are serious health concerns that come up. This type of problem must be dealt with immediately and safely, and it is not an area for amateurs. We have handled sewage problems many times over the years, and we can take care of it quickly and efficiently so that you don’t have to worry about anything.
We are the most trusted name in property damage restoration because we don’t outsource and you can trust our workers when they are in your home. They are specially trained and industry certified. You will be assigned a Project Manager who will walk you through the entire process step-by-step.  The team leader is plugged into your job every single day. No exceptions.
Laser welding, combined with targeted material selection and hardness matching, results in a gate repair that surpasses what can be achieved with traditional methods that match the base material and the filler. The laser welding process permits the use of a wide range of dissimilar metals, allowing selection of a filler metal that will result in optimal performance. Laser welding can be used to combine many different materials, including P-20, Beryllium Copper (BeCu), Stainless Steel, S-7, H-13, and others. One of the most common marriages of materials is Stainless Steel to BeCu, which maintains the cooling properties of BeCu while adding a better wear surface in the Stainless Steel. For example, a 410 stainless steel filler can create a fine martensitic microstructure, delivering optimal wear without compromising the mold’s ability to withstand flexing during injection.
Unlike sites which blend pricing from dissimilar jobs, Homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.

After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.


Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 
Policyholders don’t want hassles.  We’ll make sure you get the coverage you paid for, remove the headache of having to work with your insurance company, and streamline the entire process.  You have enough to worry about; we’ll work with your insurance company to achieve your complete satisfaction.  In fact, we’ll usually do a survey with the insurance companies to make certain each and every policyholder gets everything they are entitled to get.

A dark, damp crawl space allows mold to flourish, which can then cause structural damage. Moisture dripping through the concrete foundation of your home can cause basement leaks. Air leakage into the section between the attic and the home can cause moisture on the underside of the roof, which can lead to mold and rotting. Check your home periodically, and look for light fixtures that are look as well as the overall quality of any noticeable piping.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.

Structure is a word I don’t care for, but it seems to be required in most everything we do. In mold design, mold building, molding parts, and, yes, in mold repair. As a kid, my dad used to “structure” any rebuilding work on 19th-century gasoline engines that my brothers and I did. Coming home one day to find his super-organized shop littered with pistons, flywheels, crankshafts, and other miscellaneous engine parts and tools, he “structured” an immediate change in our work habits. After that painful experience, we did not have the freedom to just tear into the old engines without first clearing with him our plan for the day—which meant we would always be tested as to what we thought a good rebuilding sequence should be, based on what we know about a particular engine. It took a few rebuilds to appreciate the value of a structured sequence.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.

When you’re sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. Then install new insulation and drywall and nail the trim back on. And keep in mind that if the moisture returns, mold will return.
The U.S. Navy has a similar approach when working on jet engines. Engines requiring repairs are not simply yanked from the air frame and disassembled without first creating, then discussing, the maintenance plan or objectives with the shop boss. This keeps things flowing smoothly in a hanger where there would always be several jets in various stages of repair. It was much the same as a mold shop where a group of repair technicians work on multiple molds during the day or week, sharing equipment, tools, and space.
Different removal methods and measures are used depending on the category of water. Due to the destructive nature of water, chosen restoration methods also depend heavily on the amount of water, and on the amount of time the water has remained stagnant. For example, as long as carpet has not been wet for longer than 48 hours, and the water involved was not sewage based, a carpet can usually be saved; however, if the water has soaked for longer, then the carpet is probably irreparable and will have to be replaced.[8] Water damage restoration can be performed by property management teams, building maintenance personnel, or by the homeowners themselves; however, contacting a certified professional water damage restoration specialist is often regarded as the safest way to restore water damaged property.
×