Showers, tubs, sinks, toilets, windows, and doors. Water leaks around bathtubs, showers, sinks, and toilets can cause damage because the leak is often out of sight. To prevent leaks, make sure you have a watertight seal of caulk around tubs, sinks, toilets, tubs, shower stalls, windows, and doors. Cracks or mold on caulk or tile grout may indicate that you don't have a watertight seal. Remove all caulk or grout, clean and dry the surface thoroughly, and apply fresh caulk. Don't apply new caulk or grout on top of the old materials.

Any mold professional should be able to explain your mold removal project in plain English.  If a contractor is unable to explain the basic processes and steps of mold remediation and mold removal in layman’s terms, be very wary!  If someone tries to complicate and confuse you about the process and scare you into hiring them, walk away and say, “Thanks, but no thanks.”

Dalworth Restoration Crews are certified through the IICRC and receive specialized training at our Dallas/Fort Worth Restoration Facility. Our technicians are trained to professionally perform water damage restoration services according to the best practices and ANSI/IICRC S500 standards. Technicians are available 24/7 for emergency water removal, cleanup and content repair, as well as rebuild and restore your water or flood damaged property to pre-loss condition.

Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 
You may also wish to hire a flood restoration service—you can find pros under “Flood” or “Disaster recovery” in your local phone book, or check with the Better Business Bureau, local Chamber of Commerce, or contractor recommendation sites, such as Angieslist.com or MerchantCircle.com. Look for those with Institute of Inspection, Cleaning, and Restoration Certification.
Richard Covert, FLOWER MOUND, TX, Nov 17th, 2014: What a great group of professionals! Everyone was great to work with, accommodating, understanding, sympathetic but focused on getting the mess cleaned up and getting the property ready to be put back together. What a miserable thing to have happen but thankfully there are professionals like these to help you through it. 
While the mold was still being disassembled, two “cleaners” began pulling tooling out of plates and putting them into buckets in preparation for a good scrubbing—and I mean a scrubbing. Immersing the buckets into a solvent tank, they used their hands like wire whisks as they swished the close-tolerance ejector sleeves around, effectively removing any trace of vent residue or “track” marks on the tooling—and in the process maybe adding some marks of their own.
The resulting damage is a different than the initial damage.For example, if water damage resulting from a broken pipe, or appliance is listed in your wording as covered, then you may be compensated for a portion of the damages caused even though the deteriorated pipe replacement or a new appliance would not be covered. This is an example the cause of the damage not being covered, but the resulting damage being covered.
Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 
If your water bill is unusually high, that might be an indication of an undetected leak. Buying a water leak sensor that sends alerts to your phone is one way to safeguard your home. You should also check around your toilets, tubs, showers and sinks for any soft spots or moisture. Keep an eye out for loose tiles as well. If you have a dishwasher or a refrigerator with a water line, look for warped or discolored floorboards.
5 stars to the team at Allied. Geronimo and his partner saved the day when they came to my home after a severe leak had damaged my closet and bedroom. They acted quickly and professionally to dry the rooms out and prepare them for being restored. I was so pleased and relieved to work with this team. This includes the professionalism of Misty who took my initial call. She knew how stressed I was and was right there to help me with a plan of action – all leading to a great result! Thanks so much! Sarah in Santa Rosa
Public insurance adjusters are independent adjusters who help people negotiate claims with their insurance companies. Public adjusters work for you, not the insurance company. They charge you a fee for their services. The fee is usually a percentage of the claim and is subtracted from any settlement you get from your insurance company. You don't have to hire a public adjuster.
Throughout the drying process, crews will stop by periodically to monitor how the drying is progressing. Specifically, they monitor the dehumidifiers’ intake and output temperatures and humidity levels to make sure the dehumidifiers aren’t putting wet air out into the room. They’ll also go back and take readings of the same surfaces they did during the inspection phase. As rooms are declared dry, crews will often move equipment around to other areas of the home that are still wet.
Laser is an acronym for “Light Amplification by the Stimulated Emission of Radiation.” This technology produces a sharply focused beam of hot light that melts a very small area of metal and can be used to join similar or dissimilar alloys. The laser welding process can be performed quickly (normally in milliseconds) and does not scar or blemish the welding surface. In fact, by adjusting the laser’s beam diameter, a smooth, near polished finish can be achieved with the laser welder. Since very little heat is generated at the weld point, users can easily weld 0.10mm away from the most complicated and intricate machined patterns, polished surfaces and removable component assemblies.
Our technicians are certified by the Institute of Inspection, Cleaning and Restoration Certification (IICRC), which is the hallmark of professional knowledge in the cleaning and restoration industry. You will be able to tell the difference: Rainbow International emergency water damage crews use state-of-the-art equipment and we employ Rapid Structural Drying techniques to dry your structure as quickly and completely as possible.
Surface molds grow in just about any damp location, such as the grout lines of a ceramic tiled shower. They’re easy to scrub away with a mold cleaner mixture of 1/2 cup bleach, 1 qt. water and a little detergent. In mold remediation, the bleach in the cleaning mixture kills the mold, and the detergent helps lift it off the surface so you can rinse it away so it won’t return as fast. You can also buy a mildew cleaner at hardware stores, paint stores and most home centers.
Once you discover moisture, your first instinct may be to open windows to help with the drying process, but it may not be your best move. For example, if your building is mechanically ventilated, the systems need constant pressure levels to work correctly. You also want to avoid excess coolness or heat and humidity, or you may end up complicating the drying process.
×