Unless you’re doing laundry, you probably don’t think twice about your washing machine. But if it breaks down, the results could be catastrophic. For example, if the supply hose is damaged or has a faulty connection to the wall or washing machine, more than 600 gallons of water could potentially spill out within an hour. That could lead to significant water damage, especially if your washing machine is located on the second floor of your home.

Today’s precision welding shops specializing in plastic injection mold, dies and tooling repair have a wide range of new technologies available to enhance their ability to provide the highest level of quality, craftsmanship, and service to their clients. One of the fastest growing technologies is the use of manual laser welding systems as an alternative to traditional microscope GTA welding.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.

If you find mold growing on drywall, trim, or unfinished wood surfaces, and especially if the affected area is more than 10 square feet, hire a mold investigator to discover the root and extent of the problem. They’ll also be able to direct you to a reliable mold remediation company. Reputable companies work with third-party inspectors instead of doing the inspection themselves. 
After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.
And even if you do have flood insurance, you should make sure what is covered. "Many people don't realize their homeowner insurance doesn't cover rising water," says Kent. In other words, "some flood insurance will cover rain water if it comes through your roof, but most of the time, it won't cover water rising in your home, like what's happening in Texas, unless you ask for it specifically."
If your water bill is unusually high, that might be an indication of an undetected leak. Buying a water leak sensor that sends alerts to your phone is one way to safeguard your home. You should also check around your toilets, tubs, showers and sinks for any soft spots or moisture. Keep an eye out for loose tiles as well. If you have a dishwasher or a refrigerator with a water line, look for warped or discolored floorboards.
All severely warped wood (particularly flooring), rotting wood and wood that has developed mold/mildew problems will need to be replaced. Pry apart damaged boards and thoroughly clean beneath them before replacing them. And if the wood is a structural component of your house, you must be very careful when replacing it so that the structure has the right support during and after the water damage repair project.
If your water bill is unusually high, that might be an indication of an undetected leak. Buying a water leak sensor that sends alerts to your phone is one way to safeguard your home. You should also check around your toilets, tubs, showers and sinks for any soft spots or moisture. Keep an eye out for loose tiles as well. If you have a dishwasher or a refrigerator with a water line, look for warped or discolored floorboards.
Mold growth can be controlled on surfaces by cleaning with a non-ammonia detergent or pine oil cleaner and disinfecting with a 10% bleach solution. (Caution: Never mix ammonia and bleach products, as the resulting fumes can be highly toxic.) Always test this solution on a small area of the item or area you’re cleaning to be sure it doesn’t cause staining or fading. 

Water damage occurs when excess water begins to pool in areas where it shouldn’t. Many different factors can create this excess water and thereby contribute to water damage. When you are aware of the potential causes, you can take precautionary measures to help insure against a leak or flood. You will also be able to spot a problem as soon as it arises and nip it in the bud before it has a chance to cause any additional damage. The more quickly you notice the problem, the less work the water extraction and >water damage restoration company will have to fix.
You have to open up the wall to get at the mold growing inside. Since you have to repair the wall anyway, don’t hesitate to cut the drywall back beyond the obvious damage to find all the mold and let the wall dry out. To avoid cutting electrical wires, poke a hole through the damaged section and locate the wires first. Turn off the power to the outlets before you cut. Mist the moldy drywall and insulation with the pump sprayer to avoid spreading mold spores. Double-bag moldy material in heavy-duty plastic bags and tie them shut.
Type depends on the source and extent to which it has affected the home. Sources can range from clean water from a burst pipe to black water from sewage backup. Cleanup ranges from $3.75 to $7.00 per square foot. Repairs range from $450 to $7,000. Again, these vary widely depending on the source and extent of damage, whether it's a flooded basement, leaky toilet, or damaged roof.
During the walkthrough, compile a list of flooded equipment to help you estimate man-power requirements and create a preliminary schedule of repair work. As mobilization of crews begins, start developing job strategies, such as finding office space, living accommodations, and transportation for crews. You must also think about arranging food/catering services and developing work schedules. Once your crews have been mobilized and job-site safety requirements are met (see SIDEBAR: Developing a Safety Plan Following a Natural Disaster), it's time to go to work.
Once you discover moisture, your first instinct may be to open windows to help with the drying process, but it may not be your best move. For example, if your building is mechanically ventilated, the systems need constant pressure levels to work correctly. You also want to avoid excess coolness or heat and humidity, or you may end up complicating the drying process.

This category contains contaminants that will cause serious health issues and possibly death. Only professionals should handle most large-scale black water accidents such as flooding. Some cleanup, like a backed-up toilet, can be handled by competent homeowners. This type of cleanup and repair is usually the most expensive, often requiring specialized equipment used by qualified mold and chemical remediation crews. It will often require replacement (not just cleaning) of the affected home materials.
Understand that there are several people who represent the insurance company during a claim, so you want to know where the decision is coming from. Was it your agent who told you, the insurance adjuster, or a contractor? Each person plays a different role. Don't be afraid to request clarifications to avoid misunderstandings. When a claim is denied, you will normally receive something in writing advising you of the official decision.
Roofs. Keep roofs free of debris that can damage roofing and allow water to seep in. Trim tree branches to prevent them from rubbing and damaging the roof. Repair missing or damaged shingles. Properly seal any cracks around chimneys, skylights, and vents. Check metal flashing for holes, cracks, or other damage. Replace flashing or use silicone caulk to seal any openings.
Everything could be fine in your house as you sleep at night. However, it only takes a broken pipe, water heater, washing machine, fire, or a sudden major storm, to cause major water damage to your home. When you are overwhelmed with water you need to do something about it now, and you can depend on your water damage restoration professionals to be there when you need them.
Cut through the paper facing of the drywall sheet with a razor knife. Cut along the drawn lines. Break the drywall along the face cut, and fold the drywall slightly to make a crease in the paper backing of the drywall sheet. Cut through the crease in the backing paper with a razor knife from the backside of the drywall sheet, and remove the unwanted portion of drywall. To make cuts that are perpendicular to each other, use a keyhole saw for the shorter of the two cuts, and then fold and cut the drywall.

When it comes to a flood or water damage emergency in your home, every minute counts. If floodwater inside your home is not dealt with quickly, your walls, as well as your carpet, flooring, ceiling and personal property can quickly become waterlogged and damaged beyond repair. Flooded zones can quickly become unsafe for human exposure. Consider that dangerous bacteria begin to multiply in wet environments, not to mention rot and mold growth. All it takes is a few inches of water to create a serious threat to your home or office. The harmful effects of water damage can be reduced greatly by the prompt and reliable emergency flood services from Roto-Rooter.
Alameda, Antioch, Berkeley, Burlingame, Campbell, Concord, Daly City, Danville, Fremont, Foster City, Hayward, Hillsborough, Los Gatos, Los Altos, Menlo Park, Monterey, Morgan Hill, Mountain View, Oakland, Palo Alto, Piedmont, Pleasanton, Pacifica, Redwood City, Richmond, San Carlos, San Francisco, San Jose, San Leandro, San Mateo, San Ramon, Santa Clara, Santa Cruz, South San Francisco, Saratoga, Walnut Creek
Hurricanes and river flooding are common natural causes, as are high water tables and improperly graded ground. Installing a sump pump and water alarm are sensible preventions in areas with high water tables. The sump pump will pump water from under the foundation to drain it away from the home and averages about $1,200 to install. The sump pump itself will cost between $50 to $400. Also, ground that slopes towards the basement of the home can lead to leakage in the basement and increased stress on sewage systems.

Cut through the paper facing of the drywall sheet with a razor knife. Cut along the drawn lines. Break the drywall along the face cut, and fold the drywall slightly to make a crease in the paper backing of the drywall sheet. Cut through the crease in the backing paper with a razor knife from the backside of the drywall sheet, and remove the unwanted portion of drywall. To make cuts that are perpendicular to each other, use a keyhole saw for the shorter of the two cuts, and then fold and cut the drywall.
Our highly trained technicians are ready to respond immediately to flood or water damage at your Columbus property. We have the experience, expertise, and training to restore your home or business quickly and properly. We use advanced inspection and extraction equipment to find the water and remove it as quickly as possible. Our technicians will monitor and document the drying process to ensure your property is back to normal.
Almost every home gets mold infestations. The trick is to mold remediation is to get to them before they get big and harm both you and your home. In this article, you’ll learn about mold remediation and how to get rid of mold, how to get rid of black mold and what kills mold. We’ll show you how to identify mold, how to eliminate the small infestations as well as the big ones that have gotten out of hand and how to clean mold. We’ll also answer the question: Does bleach kill mold?
Water damage is a serious problem that needs immediate attention fast. The faster water damage is treated, the more furniture and valuable items are saved from permanent damage. Water damage may happen at any time and the most common cause is flooding. Floods may be caused by natural disasters such as hurricanes and excessive rainfall. Sometimes flooding may occur due to leaking faucets, broken sewage pipes, and waste buildup under sink drains.

The longer water damage sits untreated, the more likely it is that additional damage can occur. If it’s determined that drying equipment is needed, dehumidifiers will often be placed in the home to prevent against further damage like mold growth while the vendor is waiting for approval from the insurance company, if one is involved. Dehumidifiers can be present for one or multiple nights depending on factors such as the length of time the water has been present and the source of the leak. The contractor working on your home will be able to assess how long the dehumidifiers are needed.
×