At Dallas Water Damage, we pride ourselves with superior workmanship and consistent quality of service. With our 24 hour emergency call-in service, we offer free consultation advice on our water damage services as well as our carpet cleaning options. We understand the importance of having a 100% bacteria and virus free home in order to avoid health risks for our family. That’s why, aside from water damage services, our professional technicians also perform regular household cleaning and disinfecting.
HEPA air scrubbers remove contaminants from the air. This is an especially important piece of fire damage restoration equipment, as lingering soot particles can lead to health problems in a structure’s inhabitants after a fire. Commercial air scrubbers are also important in mold remediation when filtering mold spores from the contaminated environment. HEPA filtration ensures that even the smallest soot or mold particles are removed from the air.
Despite what you might think, a flooded home can be saved rather than razed to the ground, but removing the moisture quickly is key. "The biggest thing is getting in there and getting it cleaned up quickly," says Robyn Kent, claims administrator at Dalworth Restoration, based in Euless, TX. "Closer to the three- to five-day mark is when it becomes questionable, since by then, all the materials have become fragile."

When you’re sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. Then install new insulation and drywall and nail the trim back on. And keep in mind that if the moisture returns, mold will return.
If the moisture damage has been neglected or gone unnoticed for long, you’re likely to find rot. Where possible, remove and replace soft, spongy studs and wall sheathing. Where removal is difficult, treat the affected areas with a wood preservative (available at home centers), after cleaning the wood and allowing it to dry. Then double up rotted members with pressure-treated wood.
The biggest issue with the mold removal is whether you want a quick fix or to really repair all the problems that have created this problem. Moisture, bad windows, drainage system in basement, sump pump, outside grading of ground surrounding your house, window wells. The challenge is affording everything all at one time, The basement is the life of a house

It is possible to recover from a catastrophic event with a more reliable system than before. However, the speed and efficiency of the recovery will depend on the availability and accuracy of documentation. In preparation or planning for the recovery of an electrical system, the facility should ensure that all drawings/documentation are up to date and a copy is kept in a safe location that can be accessed after the event.
Remove all of the drywall from the wall if the wrong type of drywall was initially installed. On rare occasions, mold damage results from using the wrong type of drywall for a particular application. The two most common causes of mold damage, not created by water leaks, are drywall installed behind tile, or regular drywall installed in a bathroom instead of mold resistant drywall.
The insurance company must start investigating your claim within 15 days after receiving written notice and may ask you for more information. Once you send the information, the insurance company has 15 business days to accept or reject your claim. If the insurance company says it will pay your claim, it must pay within five business days. If the insurance company rejects your claim, it must explain its reasons in writing.

Almost every home gets mold infestations. The trick is to mold remediation is to get to them before they get big and harm both you and your home. In this article, you’ll learn about mold remediation and how to get rid of mold, how to get rid of black mold and what kills mold. We’ll show you how to identify mold, how to eliminate the small infestations as well as the big ones that have gotten out of hand and how to clean mold. We’ll also answer the question: Does bleach kill mold?
When there’s been water, fire, tornado or flood damage to your home or commercial business it’s difficult to know who to call to help clean up and repair the property. The answer is easy! Mr. Restore is a Dallas restoration company that provides comprehensive restoration services, as well as environmental remediation. Contact Mr. Restore today, and we can be at your property in 60 minutes!
The U.S. Navy has a similar approach when working on jet engines. Engines requiring repairs are not simply yanked from the air frame and disassembled without first creating, then discussing, the maintenance plan or objectives with the shop boss. This keeps things flowing smoothly in a hanger where there would always be several jets in various stages of repair. It was much the same as a mold shop where a group of repair technicians work on multiple molds during the day or week, sharing equipment, tools, and space.
From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
To prevent water damage, you should replace your washing machine supply hose at least once every five years. Also, resist the temptation to overload your washing machine. Constantly stuffing too many clothes into your washing machine could loosen gaskets and valves or cause cracks. Take good care of your washing machine and your washing machine will take good care of you.
Many parts of a car are challenging to clean and dry because they are hard to access. Door locks, window regulators, power seat motors, heating and air conditioning components, and many small parts are tucked away in enclosed areas or up under the dash. These items may work okay immediately following a flood, only to fail later due to contamination by dirty water.
High-quality mold repairs are consistently achieved with the DME ProWeld Micro-Welding System from Milacron. ProWeld provides precision results that increase mold life after every repair. The system is safe and easy to operate, and reduces repair costs by up to 85% with special metal alloys developed for all conventional types of steel. The ProWeld System emits almost no heat and is suitable for all forms of mold damage. There is no need for other types of welding (i.e. TIG, argon, laser welding) so the system emits no harmful welding fumes or toxic gases. Many customers report that the ProWeld System returns its investment cost well within a year of its purchase.

Inspect damaged materials for mold and mildew. Mold can start to grow in the right conditions in as little as 24 hours. For long-term issues, like mold caused by attic condensation, the mold may have started growing a long time ago. And if you find mold and mildew issues, you need to be very careful. Some mold is toxic to humans, and all mold is very damaging to the materials it infests. For small mold issues, cut out the material, bag it, and throw it away immediately. For serious mold issues, get out of the area, shut down any airflow (to avoid spore contamination) and call a professional. And keep in mind that mold can show up in hidden areas like inside walls or under floors, so this inspection and water damage repair will be ongoing.

Among the most common and most preventable causes of water damage are burst pipes. Burst pipes typically happen because of clogs and freezing. Prevent the damage by finding a family plumber to do annual inspections. Regular inspections and maintenance are a cost-effective, preventative measure. Installing new plumbing typically runs between $350 to $2,000.
Though a competent DIY homeowner may be able to clean up and repair some damage, it's important to have a professional assess it first to determine the extent and any underlying conditions. Missing even a small amount, or its causes, can lead to costlier repairs later. Even small quantities of moisture may result in mold growth. Plus, undiagnosed causes will lead to recurrences. For instance, fixing a damaged ceiling but not the leaky roof that caused it will only lead to another wrecked ceiling.
Cut through the paper facing of the drywall sheet with a razor knife. Cut along the drawn lines. Break the drywall along the face cut, and fold the drywall slightly to make a crease in the paper backing of the drywall sheet. Cut through the crease in the backing paper with a razor knife from the backside of the drywall sheet, and remove the unwanted portion of drywall. To make cuts that are perpendicular to each other, use a keyhole saw for the shorter of the two cuts, and then fold and cut the drywall.
No type of flood damage, no matter the source of the water, is covered by standard homeowners policies. Flooding, for example, can occur from storms, over-saturated ground, overflowing or surging bodies of water such as rivers, ponds, lakes and oceans. You may be able to purchase a separate flood insurance policy through the National Flood Insurance Program.
When you’re sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. Then install new insulation and drywall and nail the trim back on. And keep in mind that if the moisture returns, mold will return.

In addition to the obvious damage it does to upholstery and carpeting, floodwater is a corrosive and abrasive mixture of water and dirt that works its way into every seam and crevice of a vehicle. Sewage and chemical contaminants may also be present in floodwater, and in coastal areas salt water from ocean storm surges can increase the possibility of vehicle damage and costly auto repairs. Even if a car is mechanically safe to drive, sanitary concerns could make it unwise for you to do so.
Before any mold is released for production (“blue-tagged”), it is imperative to put the mold through a series of final-check bench procedures to verify “All Systems Go” and minimize any opportunities for the mold to be stopped and returned to the shop for something that should have been caught before it was released. Water leaks, heater problems, etc., can be avoided with a final-check procedure.
We offer structural drying, as after the immediate water emergency has been resolved with damage restoration, your house and its contents still need to be thoroughly dried out. We have specialized equipment that is able to get this done in as short a time as possible, and with minimal disruption. Our commercial-grade water extractors will get your carpet and other flooring back to nearly 100% dry condition. We also use high-speed blowers to circulate air at high volumes throughout the house in order to facilitate the drying process.
All water damage restoration jobs are unique and the amount of work required for each depends on a variety of factors such as the amount of area in the home that’s been damaged and how long the water has been present. Once a professional water damage cleanup vendor arrives and has a chance to inspect the home, they’ll be able to put together a detailed project timeline specific to your job. In the meantime, we’ve listed the eight common phases that occur during the water damage restoration process and what happens in each, so you’ll know what to expect.
×