Fire and Water Restoration companies are regulated by the appropriate state's Department of Consumer Affairs - usually the state contractors license board. In California, all Fire and Water Restoration companies must register with the California Contractors State License Board.[10] Presently, the California Contractors State License Board has no specific classification for "water and fire damage restoration."


Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
You should expect a fully trained Hillsboro water damage repair technician at the door who’s ready to begin to work immediately after a thorough inspection of the problem. Having our own fleet and equipment, allows us to get the water damage cleanup done faster than many other companies. Our business success depends upon restoring your life back to normal regardless of the Hillsboro water damage and the mess it caused. This is our passion and our clients will tell you so. Our professional staff is working 24/7 to make sure your call is answered by a real person. Give us a call at any time, day or night.
The U.S. Navy has a similar approach when working on jet engines. Engines requiring repairs are not simply yanked from the air frame and disassembled without first creating, then discussing, the maintenance plan or objectives with the shop boss. This keeps things flowing smoothly in a hanger where there would always be several jets in various stages of repair. It was much the same as a mold shop where a group of repair technicians work on multiple molds during the day or week, sharing equipment, tools, and space.
Mold can develop within 24 to 48 hours of a flood, says Ashley Small of FEMA, so remove wet contents, including carpeting and bedding, as soon as possible. If an item has been wet for less than 48 hours, it may be salvageable. However, you’ll need to decide whether it holds enough monetary or sentimental value to try to do so. And notify your insurance company before removing items to ensure that you’re not affecting coverage. Always photograph the flood-soaked items.

When flooding happens, it would be best to call our Dallas Water Damage office right away. The faster the situation is controlled, the better chances of everything restored in their pre-loss state. Upholstered furniture, Persian carpets, oriental rugs, floor carpets, wooden cabinets, and other valuable home items will undergo full restoration by our Dallas Water Damage quality service technicians.

Assessing the severity of the damage is important for determining what is needed to start water damage repair and water removal. There are several different categories assigned to water damage. Category 1 refers to clean water, or water that does not pose a threat to humans. Possible causes of this type of damage include broken appliances or sink overflows. Category 2 water is also called gray water. This means that the water is contaminated and may cause sickness of ingested. This type of water contains microorganisms. Broken toilets, broken sump pumps, and seepage may cause category 2 water damage. Category 3 water is known as black water. This type of water is unsanitary, as it contains bacteria and other organisms that cause sickness. The possible sources of black water damage include sewage problems and contamination of standing water.
The U.S. Navy has a similar approach when working on jet engines. Engines requiring repairs are not simply yanked from the air frame and disassembled without first creating, then discussing, the maintenance plan or objectives with the shop boss. This keeps things flowing smoothly in a hanger where there would always be several jets in various stages of repair. It was much the same as a mold shop where a group of repair technicians work on multiple molds during the day or week, sharing equipment, tools, and space.
Also, a combination of moisture and humidity can cause mold to grow as well as any unrepaired water leaks. For instance, if the your air conditioning unit is set to a temperature that causes condensation on your windows then common sense should tell you that your windows may not be the only places with condensation or moisture. (between the walls) If there is already mold growing, these temperatures that cause condensation will only feed the mold to grow.
Hurricanes and river flooding are common natural causes, as are high water tables and improperly graded ground. Installing a sump pump and water alarm are sensible preventions in areas with high water tables. The sump pump will pump water from under the foundation to drain it away from the home and averages about $1,200 to install. The sump pump itself will cost between $50 to $400. Also, ground that slopes towards the basement of the home can lead to leakage in the basement and increased stress on sewage systems.
While you have no control over natural water-related disasters, you can take all the preventative measures possible ahead of time to minimize their effect on your home. Flash floods, sudden storms and hurricanes can all trigger water buildup. Prompt attention by contacting The Water Damage Experts as soon as you can after a weather-related issue will help lessen the time for water damage to occur.
No type of flood damage, no matter the source of the water, is covered by standard homeowners policies. Flooding, for example, can occur from storms, over-saturated ground, overflowing or surging bodies of water such as rivers, ponds, lakes and oceans. You may be able to purchase a separate flood insurance policy through the National Flood Insurance Program.

"Using truck-mounted vacuums with 2,000 horsepower, and dehumidifiers, we can extract moisture from furniture, hardwood, tile, even Sheetrock," Kent says. Even electronics like TVs and laptops may still operate after a thorough drying. "In fact, when carpet gets wet, people think it's ruined, but it actually ends up stronger than when it was made," Kent says.
In addition, it’s important to have a working flashlight and turn off all water and electrical sources within the home, says Dr. Maurice A. Ramirez, author of “The Complete Idiot’s Guide to Disaster Preparedness.” Even if the power isn’t operational, it’s a good idea to go to your fuse box and turn off the main, plus all of the individual fuse connections. That way, if the power is reactivated, you’re not at risk for mixing standing water and electricity.
Gray water contains a significant level of contamination and has the potential to cause discomfort or sickness if consumed by or exposed to humans. Gray water may contain chemicals, bio-contaminants (fungal, bacterial, viral, algae), or other contaminants. Examples include: discharge from dishwashers or washing machines, overflows from washing machines, overflows from toilet bowls with some urine (no feces), sump pump failures, seepage due to hydrostatic pressure, broken aquariums, and punctured water beds. Gray water that remains untreated for longer than 48 hours may escalate to Category 3.
Remove all of the drywall from the wall if the wrong type of drywall was initially installed. On rare occasions, mold damage results from using the wrong type of drywall for a particular application. The two most common causes of mold damage, not created by water leaks, are drywall installed behind tile, or regular drywall installed in a bathroom instead of mold resistant drywall.
For instance, it will be less expensive to restore a basement with an inch of clean water from a burst pipe than to tackle a fix caused by three feet of sewage backup. An inch of clean water would start at around $500 to $1500 to pump out and thoroughly dry it. However, the price of basement drainage repairs can increase up to $10,000 or more depending on the size of the space and the extent of the damage. Budget more when your space has been hit from contaminated sources, like a river flood.

This category contains contaminants that will cause serious health issues and possibly death. Only professionals should handle most large-scale black water accidents such as flooding. Some cleanup, like a backed-up toilet, can be handled by competent homeowners. This type of cleanup and repair is usually the most expensive, often requiring specialized equipment used by qualified mold and chemical remediation crews. It will often require replacement (not just cleaning) of the affected home materials.

There are also several classes of water damage. The class of damage is important when assessing water damage repair options. Class 1 is the least harmful form of damage. Materials absorb very little of the water from this type of damage. Water damage repair is the easiest in this type of situation. Class 2 has a fast rate of evaporation, which means that carpets and cushions may be damaged. Water damage repair is more difficult when it involves class 2 damage. Class 3 has the fastest rate of evaporation. In this case, the water may come from broken sprinklers or other overhead sources, soaking the walls and furniture. Class 4 requires special water restoration and water removal procedures. This type of damage may affect hardwood floors, plaster, and concrete.
Before you remove any water or make any repairs, fully document the damage for your insurer by taking photos or video. Digital versions are best, says Ramirez, because they can be stored electronically and easily copied. If you start removing water or making repairs before you photograph the damage, you could potentially decrease the extent of your coverage, he says.

If you have a replacement cost policy, most insurance companies pay claims with two checks. The insurance company will give you the first check after the adjuster has reviewed your damage. This check will be for the estimated cost of repairs, minus depreciation and your deductible. A deductible is the amount of the claim that you're responsible for paying yourself. Review your policy or ask your agent or adjuster if you don't know how much your deductible is.
How to remove mold and how to perform black mold removal can be done with ordinary household cleaning products. But disturbing big infestations of mold on bathroom walls and other places can be bad for your health, particularly if you are an allergy sufferer or have a weakened immune system. When you discover an extensive mold problem, we recommend that you use the rigorous protective measures we show in Photos 1 – 6, or consider calling in a professional, who knows what kills mold, to handle the problem of how to remove mold. (Search “Industrial Hygiene Consultants” or “Environmental and Ecological Consultants” online to find out how to remove black mold and black mold removal cost. Or call your local public health department on how to get rid of black mold.) And even if you hire pros, read through this article and make sure they follow similar precautions on how to get rid of mold and to keep the mold from spreading throughout your house.
Damage from long standing water falls in this class, like river flooding or storm surges from a hurricane. It has saturated materials such as stone, brick, and hardwood. These materials have low permeance — meaning they do not soak up liquids quickly. Time is the primary factor in this category. With a higher cost of cleanup and repair, it is important to get problems diagnosed and solved as quickly as possible.
When water invades your home, it can be an overwhelming and stressful experience. When this happens, the best course of action you can take is to call a restoration company, such as Mr. Restore, immediately. As soon as we arrive on your property, our team can find the source of the problem, stop the water from coming in, and proceed with the water removal process. If you wait on contacting us, secondary water damage can occur, and mold formation could potentially begin. Our crew thoroughly dries any surfaces that have incurred water damage, such as wood, drywall and paneling.
Our qualified, certified and experienced Dallas plumbers specialize in sewer line cleaning, sewer video inspection, sewer and water taps, trenchless repair and pipe bursting. We also handle leak and location, and repair and replacement for sewer and water lines. Our customer-first service and quality of work earned us the Angie’s List Super Service Award from 2012-2017, and an A+ rating with the Better Business Bureau. We have the knowledge and drive to do complete all your plumbing services.
The water restoration process is an important one. Using the right procedures and materials can help people save cherished belongings and even prevent their homes from being condemned. Water restoration companies specialize in mitigating the effects of water, but the success for water damage restoration depends on the severity of the damage and the amount of water that caused the damage. Water restoration companies may hire outside experts to assess a property and determine a water restoration and water removal plan. These water restoration companies typically use high-tech equipment and well-documented procedures to control water damage. Water in basement areas may only require a short cleanup process, but water in other areas of a property will require extensive remediation.
If your home or business is flooded, make sure to call a flood damage cleanup professional immediately.  The water damage will continue to spread the longer you do not take action and there is a good chance that the flood water contains sewage which can contribute to health problems.  Call us at 1-888-915-8868 or use the form on the right of the page to locate a flood damage restoration expert near you.

What do you do when you have a flood in your home? Call a company you can trust. Dalworth's water damage and restoration professionals are certified, bonded and insured for your security and peace of mind. Our experts understand the last thing you need is more stress when your home or business floods. Whether it's a water leak from a burst kitchen pipe or flooding from a natural disaster, contact Dalworth Restoration for your water damage restoration, water cleanup and removal or disaster cleanup services in your North Texas town.
Insurance is offered by Safeco Insurance Company of America and/or its affiliates, with their principal place of business at 175 Berkeley Street, Boston, Massachusetts, 02116. This website provides a simplified description of coverage. Nothing stated herein creates a contract. All statements made are subject to the provisions, exclusions, conditions and limitations of the applicable insurance policy. Please refer to actual policy forms for complete details regarding the coverage discussed. If the information in these materials conflicts with the policy language that it describes, the policy language prevails. Coverages and features not available in all states. Eligibility is subject to meeting applicable underwriting criteria.
Black water contains pathogenic agents and is grossly unsanitary. Anyone with a compromised immune system, respiratory problems, or allergies, as well as young children and the elderly must remain off the job site until the building is judged safe for occupancy. Black water includes sewage and other contaminated water sources entering or affecting the indoor environment, such as: toilet backflows, flooding from seawater, ground surface water, and rising river water. Category 3 water can contain contaminants such as pesticides, heavy metals, or toxic substances.
While there are currently no government regulations in the United States dictating procedures, two certifying bodies, the Institute of Inspection Cleaning and Restoration Certification (IICRC) and the RIA, do recommend standards of care. The current IICRC standard is ANSI/IICRC S500-2015.[9] It is the collaborative work of the IICRC, SCRT, IEI, IAQA, and NADCA.
×