Richard Covert, FLOWER MOUND, TX, Nov 17th, 2014: What a great group of professionals! Everyone was great to work with, accommodating, understanding, sympathetic but focused on getting the mess cleaned up and getting the property ready to be put back together. What a miserable thing to have happen but thankfully there are professionals like these to help you through it. 
For instance, if you remove 16 ejector pins from a mold and notice that a couple of them feel tight, will you remember which ones were tight later on, when you peruse past records to discover that galling pins have been a problem for the past five production runs? Knowing this information before you split or disassemble a mold removes some of the guesswork involved when looking for the root cause.
Clean water that originated from a source that does not pose substantial harm to humans. Examples include: broken water supply lines, melting ice or snow, falling rainwater, broken toilet tanks, and toilet bowls that do not contain contaminants or additives. Clean water may deteriorate with time as it dissolves or mixes with soils and other contaminants.
It’s important to understand the differences because Category 2 and Category 3 water present health risks to your employees and customers and need to be handled differently. The most likely sources of clean water would be water from a pipe, water heater, steam lines or even rainwater. The basic rule of thumb is that it should look and smell like tap water.
After a sketch is made of the piece of equipment, add the equipment to a detailed electrical equipment tracking sheet, which should include general information such as the item number, sequence number, priority, area of the plant, power center or room number, transformer, substation, cell position, equipment type, circuit identification, plant identification number, manufacturer, percent water level, model number, frame size, and voltage. After completing these procedures on all the equipment associated with a power center or a piece of gear, the QA/QC leader must review the documentation for accuracy. Once the documentation has been approved, the equipment is ready for removal.

Any mold professional should be able to explain your mold removal project in plain English.  If a contractor is unable to explain the basic processes and steps of mold remediation and mold removal in layman’s terms, be very wary!  If someone tries to complicate and confuse you about the process and scare you into hiring them, walk away and say, “Thanks, but no thanks.”
Indoor and outdoor pipes and faucets. Routinely check indoor pipes under cabinets and sinks for leaks, rust, and any signs of deterioration. Minimize the potential for water damage from frozen and broken outdoor pipes by insulating supply lines (in attics, crawlspaces, and exterior walls), protecting exposed outdoor faucets, sealing gaps in exterior walls, and maintaining adequate heat in your home.
Drywall repair cost about $500 on average with a typical range of $250 to $750, but can cost much more or less depending on the destruction. It is used in most modern homes and is found in almost all finished areas of a house, including bathrooms. When it becomes wet, it typically needs to be replaced. Not only is the drywall itself ruined, but the wet paper backer of the drywall becomes an excellent environment for mold growth.
Even if the water in your home is clear, it could be contaminated by sewage or household chemicals. Ramirez recommends wearing waders, hip- or waist-high waterproof boots. In addition, wear rubber gloves to remove water-damaged possessions and to avoid contaminants, Ramirez notes. Be sure to throw out any food that may have come into contact with flood waters. FEMA recommends boiling water until authorities declare the water supply is safe.
When left to sit for long periods of time, especially if the homeowners temporarily relocate while recovering from a house fire, further structural damage can complicate matters—making it difficult to return life back to normal. Calling in a water damage repair company is an excellent preventative measure for reducing the risk of further problems and headaches.
At this stage, put away all measuring instruments and hand tools and focus on how best to clean the tool. The type, frequency, and method of cleaning molds should be based on cycles, hours, or production in conjunction with mold-specific factors (resin, residue, vent location and capacity, tooling concerns, etc.) that will dictate the cleaning level and process.
In mold repair, structure is especially critical when working with many pieces of close-fitting tooling that are nested into plates. Remembering the type, fit, relational position of components, and the sheer volume of tooling in some molds can be overwhelming enough without adding confusion about where you are in the process of the repair. In shops where two repair techs are usually assigned to a mold, time can be saved by working in a organized approach.
On average, it costs around $2,300 for mold removal. Mold spores are found in almost all environments and begin growing in just 24 to 48 hours when moisture is present. All types of water damage come with a risk of fungal growth. The longer moisture sits, the greater the risk and cost of removal. Only a qualified inspector should test for mold. An inspector can help determine if there is any and if professional remediation is needed.
Dalworth Restoration Crews are certified through the IICRC and receive specialized training at our Dallas/Fort Worth Restoration Facility. Our technicians are trained to professionally perform water damage restoration services according to the best practices and ANSI/IICRC S500 standards. Technicians are available 24/7 for emergency water removal, cleanup and content repair, as well as rebuild and restore your water or flood damaged property to pre-loss condition.

If you have a high concentration of mold, you may smell it. If you detect the typical musty odor, check for mold on damp carpets, damp walls, damp crawlspaces and wet wood under your floors, wet roof sheathing and other damp areas. Clean up these infestations right away before they get worse, and see the following photos for prevention measures on how to remove mold.
While you have no control over natural water-related disasters, you can take all the preventative measures possible ahead of time to minimize their effect on your home. Flash floods, sudden storms and hurricanes can all trigger water buildup. Prompt attention by contacting The Water Damage Experts as soon as you can after a weather-related issue will help lessen the time for water damage to occur.
When flooding happens, it would be best to call our Dallas Water Damage office right away. The faster the situation is controlled, the better chances of everything restored in their pre-loss state. Upholstered furniture, Persian carpets, oriental rugs, floor carpets, wooden cabinets, and other valuable home items will undergo full restoration by our Dallas Water Damage quality service technicians.
Steven Johnson worked as a toolmaker for 26 years, rebuilding and repairing multicavity molds for Calmar Inc. and then as mold-maintenance engineer for Hospira Inc., a medical device manufacturer. Today, he is the maintenance systems manager for Progressive Components and has his own business, MoldTrax in Ashland, Ohio, which designs and sells software for managing mold maintenance (www.moldtrax.com). He can be reached at [email protected] or (419) 289-0281. 

You can easily spot the most visible type of mold, called mildew, which begins as tiny, usually black spots but often grows into larger colonies. It’s the black stuff you see in the grout lines in your shower, on damp walls, and outdoors on the surfaces of deck boards and painted siding, especially in damp and shady areas. A mildewed surface is often difficult to distinguish from a dirty one. To test for mildew, simply dab a few drops of household bleach on the blackened area. If it lightens after one to two minutes, you have mildew. If the area remains dark, you probably have dirt.


If left untreated, water can be a destructive force to any residential or commercial property. It can lead to mold growth, stains, and can jeopardize the integrity of the building. Our restoration specialists can carefully inspect your property to determine the extent of the damage and can create customized solutions for you. With our 24/7 emergency services, you can rest assured you have a trusted team ready to help you.
×