For instance, if you remove 16 ejector pins from a mold and notice that a couple of them feel tight, will you remember which ones were tight later on, when you peruse past records to discover that galling pins have been a problem for the past five production runs? Knowing this information before you split or disassemble a mold removes some of the guesswork involved when looking for the root cause.
In addition, it’s important to have a working flashlight and turn off all water and electrical sources within the home, says Dr. Maurice A. Ramirez, author of “The Complete Idiot’s Guide to Disaster Preparedness.” Even if the power isn’t operational, it’s a good idea to go to your fuse box and turn off the main, plus all of the individual fuse connections. That way, if the power is reactivated, you’re not at risk for mixing standing water and electricity.
Inspect damaged materials for mold and mildew. Mold can start to grow in the right conditions in as little as 24 hours. For long-term issues, like mold caused by attic condensation, the mold may have started growing a long time ago. And if you find mold and mildew issues, you need to be very careful. Some mold is toxic to humans, and all mold is very damaging to the materials it infests. For small mold issues, cut out the material, bag it, and throw it away immediately. For serious mold issues, get out of the area, shut down any airflow (to avoid spore contamination) and call a professional. And keep in mind that mold can show up in hidden areas like inside walls or under floors, so this inspection and water damage repair will be ongoing.
Damage from long standing water falls in this class, like river flooding or storm surges from a hurricane. It has saturated materials such as stone, brick, and hardwood. These materials have low permeance — meaning they do not soak up liquids quickly. Time is the primary factor in this category. With a higher cost of cleanup and repair, it is important to get problems diagnosed and solved as quickly as possible.
Locate and repair the source of the leak. The source of the problem is usually apparent once you remove the drywall and expose the framing. If the leak source is not easily determined, consult a licensed contractor before you replace the drywall. You must repair the cause of the leak or mold and mildew will eventually reform over the new drywall. An unresolved leak may also create additional damage to framing, insulation, siding and flooring.
When there’s been water, fire, tornado or flood damage to your home or commercial business it’s difficult to know who to call to help clean up and repair the property. The answer is easy! Mr. Restore is a Dallas restoration company that provides comprehensive restoration services, as well as environmental remediation. Contact Mr. Restore today, and we can be at your property in 60 minutes!
The project documentation manager should make sure the camera memory sticks are downloaded to a folder located on the site server. Each picture will be opened and saved in a folder labeled by the appropriate power center or room number. There are two pictures associated with each piece of equipment, both of which should be labeled using the sequence number. After saving the pictures on the local server, the memory sticks will be erased and ready for use the next day.
How to remove mold and how to perform black mold removal can be done with ordinary household cleaning products. But disturbing big infestations of mold on bathroom walls and other places can be bad for your health, particularly if you are an allergy sufferer or have a weakened immune system. When you discover an extensive mold problem, we recommend that you use the rigorous protective measures we show in Photos 1 – 6, or consider calling in a professional, who knows what kills mold, to handle the problem of how to remove mold. (Search “Industrial Hygiene Consultants” or “Environmental and Ecological Consultants” online to find out how to remove black mold and black mold removal cost. Or call your local public health department on how to get rid of black mold.) And even if you hire pros, read through this article and make sure they follow similar precautions on how to get rid of mold and to keep the mold from spreading throughout your house.
If you’ve just experienced a water event, you might be wondering what to do next: Seeping water damage is progressive, pervasive and can mean valuable objects may become permanently damaged – especially if emergency response is delayed beyond the first 48 hours. When moisture seeps into items of value there are immediate steps that can be taken to reduce the amount of long-term damage that results.

Throughout the drying process, crews will stop by periodically to monitor how the drying is progressing. Specifically, they monitor the dehumidifiers’ intake and output temperatures and humidity levels to make sure the dehumidifiers aren’t putting wet air out into the room. They’ll also go back and take readings of the same surfaces they did during the inspection phase. As rooms are declared dry, crews will often move equipment around to other areas of the home that are still wet.

Roofs should be inspected annually. A professional roof contractor can look for exterior and interior warning signs that your roof’s condition may lead to water damage, including cracked or missing shingles and areas where water is prone to pool. An inspection can cost several hundred dollars, but in exchange for your peace of mind, it’s priceless.
Even if the water in your home is clear, it could be contaminated by sewage or household chemicals. Ramirez recommends wearing waders, hip- or waist-high waterproof boots. In addition, wear rubber gloves to remove water-damaged possessions and to avoid contaminants, Ramirez notes. Be sure to throw out any food that may have come into contact with flood waters. FEMA recommends boiling water until authorities declare the water supply is safe.
Almost every home gets mold infestations. The trick is to mold remediation is to get to them before they get big and harm both you and your home. In this article, you’ll learn about mold remediation and how to get rid of mold, how to get rid of black mold and what kills mold. We’ll show you how to identify mold, how to eliminate the small infestations as well as the big ones that have gotten out of hand and how to clean mold. We’ll also answer the question: Does bleach kill mold?
The Water Damage Experts does NOT perform any repairs, replacement and reconstruction of any kind, which requires a license from the State of California. We are an IICRC Certified Water Damage Firm with over 29 years experience in emergency water damage restoration & crawlspace clean-ups. We use standard industry drying procedures in order to save our customers from the expense of further repair, replacement & reconstruction costs normally associated with water damage issues. We have a top rating of A+ & Accredited by the Better Business Bureau.
Our professional technicians have been trained, experienced, and certified to restore water damaged furniture, household items, and rugs to their original pre-loss conditions. If you’ve had water damage, call our 24 hour call-in emergency service department and our technicians will be right over in 30 minutes or less. Every minute counts in water damage restoration and we sure don’t want to waste any of it that’s why we have full operations 24 hours a day, 7 days a week, 365 days a year.
The first order of business in assessing water damage to the electrical equipment in any industrial plant is to gather all pertinent drawings and documentation available and perform a walkthrough of the entire electrical infrastructure. However, at times, drawings and documentation may not be available due to destruction (Photo 1). In this case, walkthroughs must be performed through tribal knowledge of plant personnel. Keep in mind the initial assessment is preliminary in nature, and an absolute understanding of the damage will not be gained until the equipment is disassembled in its entirety.

In December, while over at my friend's house I heard an explosion and I didn't know what it was or what happened but I guess her pipes had frozen and that turned into a huge flood in her basement. The water increased quickly and we didn't have any idea what to do or who to call and so I looked up emergency water damage and found Nashville Water Damage Flood Repair who came out very quickly and shut the water off so that the problem could be dealt with. These guys really knew their stuff as they shut the water off and begin removing all of the water that it built up in the basement. Luckily for us that there wasn't a whole lot of valuables except for a dresser in the basement that my friend wanted to keep and so most of their efforts were just about removing all of the water from the basement which they did a great job of it took a day or so but they got the job done and they did it right.


Over a quarter of a million American homes each year will suffer from damage due to frozen or burst pipes. A frozen, broken or leaky pipe are all inconveniences that can lead to major headaches for your home. Ignoring these repairs can be extremely costly as basement water damage can lead to an unstable structure and damage of your valuables. When you need flood damage cleanup with a burst or frozen pipe or are dealing with flooding at all, give us a call today!
At Dallas Water Damage, we pride ourselves with superior workmanship and consistent quality of service. With our 24 hour emergency call-in service, we offer free consultation advice on our water damage services as well as our carpet cleaning options. We understand the importance of having a 100% bacteria and virus free home in order to avoid health risks for our family. That’s why, aside from water damage services, our professional technicians also perform regular household cleaning and disinfecting.
Nashville Water Damage Flood Repair has over 30 years of combined experience with damage restoration companies in the Nashville Tennessee area. Emergency flood repairs, water removal and extraction are all services we are highly trained in with years of experience to solve your water damage problems with creative and cost effective solutions. We help with all insurance claims, residential and commercial large loss claims as well in Murfreesboro & Franklin along with Nashville.
Roofs should be inspected annually. A professional roof contractor can look for exterior and interior warning signs that your roof’s condition may lead to water damage, including cracked or missing shingles and areas where water is prone to pool. An inspection can cost several hundred dollars, but in exchange for your peace of mind, it’s priceless.
If you’ve just experienced a water event, you might be wondering what to do next: Seeping water damage is progressive, pervasive and can mean valuable objects may become permanently damaged – especially if emergency response is delayed beyond the first 48 hours. When moisture seeps into items of value there are immediate steps that can be taken to reduce the amount of long-term damage that results.
To further ensure a safe and effective environmental remediation, our crews are rigorously trained in mold removal procedures approved by the Indoor Air Quality Association (IAQA); Institute of Inspection, Cleaning and Restoration Certification (IICRC);  the Restoration Industry Association (RIA); and our own in-house trainers. In addition, all of our superintendents, operations managers, project managers, project directors and regional managers  hold Certified Mold Remediation (CMR) certifications.
After a sketch is made of the piece of equipment, add the equipment to a detailed electrical equipment tracking sheet, which should include general information such as the item number, sequence number, priority, area of the plant, power center or room number, transformer, substation, cell position, equipment type, circuit identification, plant identification number, manufacturer, percent water level, model number, frame size, and voltage. After completing these procedures on all the equipment associated with a power center or a piece of gear, the QA/QC leader must review the documentation for accuracy. Once the documentation has been approved, the equipment is ready for removal.

Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
Since you should notify your insurer soon as possible after the flood, it’s a good idea to keep your insurance company and local agent’s phone number in your always-ready emergency bag. (Note that the NFIP works through private insurance companies, so you contact your insurer just as you would for any other type of claim). In cases where a flood has affected a region or community, your agent may be busy handling his or her own flood issues. In that case, contact the insurance company’s headquarters. 
Clean water that originated from a source that does not pose substantial harm to humans. Examples include: broken water supply lines, melting ice or snow, falling rainwater, broken toilet tanks, and toilet bowls that do not contain contaminants or additives. Clean water may deteriorate with time as it dissolves or mixes with soils and other contaminants.
In the United States, those individuals who are affected by widescale flooding may have the ability to apply for government and FEMA grants through the Individual Assistance program.[1] On a larger level, businesses, cities, and communities can apply to the FEMA Public Assistance program for funds to assist after a large flood. For example, the city of Fond du Lac Wisconsin received $1.2 million FEMA grant after flooding in June 2008. The program allows the city to purchase the water damaged properties, demolish the structures, and turn the properties into public green space.[2]
×