If your water bill is unusually high, that might be an indication of an undetected leak. Buying a water leak sensor that sends alerts to your phone is one way to safeguard your home. You should also check around your toilets, tubs, showers and sinks for any soft spots or moisture. Keep an eye out for loose tiles as well. If you have a dishwasher or a refrigerator with a water line, look for warped or discolored floorboards.

Before any mold is released for production (“blue-tagged”), it is imperative to put the mold through a series of final-check bench procedures to verify “All Systems Go” and minimize any opportunities for the mold to be stopped and returned to the shop for something that should have been caught before it was released. Water leaks, heater problems, etc., can be avoided with a final-check procedure.
Once you’ve pulled away wet materials and established holes or cuts in the wall as needed, you’ll typically need one air mover for every 15 – 25 square feet of floor, unless the moisture load and density is particularly high, then you may need more. To prevent mold, make sure all of the layers and materials are dry before putting everything back together.
The biggest issue with the mold removal is whether you want a quick fix or to really repair all the problems that have created this problem. Moisture, bad windows, drainage system in basement, sump pump, outside grading of ground surrounding your house, window wells. The challenge is affording everything all at one time, The basement is the life of a house
Cut through the paper facing of the drywall sheet with a razor knife. Cut along the drawn lines. Break the drywall along the face cut, and fold the drywall slightly to make a crease in the paper backing of the drywall sheet. Cut through the crease in the backing paper with a razor knife from the backside of the drywall sheet, and remove the unwanted portion of drywall. To make cuts that are perpendicular to each other, use a keyhole saw for the shorter of the two cuts, and then fold and cut the drywall.
Before any mold is released for production (“blue-tagged”), it is imperative to put the mold through a series of final-check bench procedures to verify “All Systems Go” and minimize any opportunities for the mold to be stopped and returned to the shop for something that should have been caught before it was released. Water leaks, heater problems, etc., can be avoided with a final-check procedure.

Believe it or not, there are three types of water. The first type is “clean” water from rain, condensation, leaky pipes, and so on. It’s relatively harmless to clean it up yourself. But if you decide to seek outside help, it costs around $3.75 per square foot for basic water damage cleanup (replacements not included). The second type is gray water, slightly dirty water from dishwashers, washing machines, clean toilets, and so on. And it may have some contaminants. But you can clean it up yourself if you remove it carefully and with proper safety gear to protect yourself. Professional water damage cleanup cost rises to $4.50 per square foot.
Keep the basement dry as it's the most common place to find damage. Flooding, burst pipes, and even clogged gutters can cause leaks. Pitching the landscape, cleaning the gutters, and installing downspout extensions are simple outdoor fixes. From the inside, install a sump pump and water alarm. Have the basement inspected for waterproofing – or have some installed.
Expert Rytech technicians will apply state-of-the-art drying process techniques to your property and issue a full written report to Olympus upon completion. Rytech gives you the added security and assurance of specialists who carry visible identification, arrive in clearly marked Rytech vehicles, and wear protective footwear to avoid soiling undamaged areas of your property.
Once our restoration team removes the moisture from your home or business, we then will begin repairing and restoring the property. The length of this process depends on the extent of damage. Our team of trained technicians uses all the latest technology and top industrial equipment to remove the moisture and prevent further damage. The sooner that we are contacted, the less damage can affect your property. We offer emergency services and can arrive at your home or business almost immediately. Call Mr. Restore in Dallas today for a free evaluation of the services we provide.
It’s time for one of the most important steps: removing any standing water from the home. The removal process is actually much less complicated than you may think. Contractors use fancy shop vacuums and rotate them around the room, sucking up all the water that’s present in the area. The amount of time this phase takes varies depending on the type of substrate that’s being dried, the size of the room and the total amount of water that’s present.
Everything could be fine in your house as you sleep at night. However, it only takes a broken pipe, water heater, washing machine, fire, or a sudden major storm, to cause major water damage to your home. When you are overwhelmed with water you need to do something about it now, and you can depend on your water damage restoration professionals to be there when you need them.
All water damage restoration jobs are unique and the amount of work required for each depends on a variety of factors such as the amount of area in the home that’s been damaged and how long the water has been present. Once a professional water damage cleanup vendor arrives and has a chance to inspect the home, they’ll be able to put together a detailed project timeline specific to your job. In the meantime, we’ve listed the eight common phases that occur during the water damage restoration process and what happens in each, so you’ll know what to expect.
Sewage mitigation is one of our biggest services. If you have a sewage line that backs up, or your toilet overflows, or you have a flood that includes sewage, there are serious health concerns that come up. This type of problem must be dealt with immediately and safely, and it is not an area for amateurs. We have handled sewage problems many times over the years, and we can take care of it quickly and efficiently so that you don’t have to worry about anything.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
You can find out how old your water heater is by looking up the serial number on the manufacturer’s sticker near the top of the water heater. Make sure to regularly inspect your water heater to check for signs of moisture build-up, mold or corrosion. If your water isn’t as hot as it used to be or there’s rust coming from your faucets, it’s time to call a plumber or water heater specialist.
While there are currently no government regulations in the United States dictating procedures, two certifying bodies, the Institute of Inspection Cleaning and Restoration Certification (IICRC) and the RIA, do recommend standards of care. The current IICRC standard is ANSI/IICRC S500-2015.[9] It is the collaborative work of the IICRC, SCRT, IEI, IAQA, and NADCA.
×