Inspect damaged materials for mold and mildew. Mold can start to grow in the right conditions in as little as 24 hours. For long-term issues, like mold caused by attic condensation, the mold may have started growing a long time ago. And if you find mold and mildew issues, you need to be very careful. Some mold is toxic to humans, and all mold is very damaging to the materials it infests. For small mold issues, cut out the material, bag it, and throw it away immediately. For serious mold issues, get out of the area, shut down any airflow (to avoid spore contamination) and call a professional. And keep in mind that mold can show up in hidden areas like inside walls or under floors, so this inspection and water damage repair will be ongoing.
After you learn how to remove mold, you’ll want to prevent it in the future. The key to stopping most mold is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses on how to get rid of mold.

When a severe thunderstorm hits, the risk for property damage increases greatly as heavy rains can cause water damage as well as flooding in your home.  Flooding from storms is a major problem that requires a combination of methods to correctly treat it and protect your health.  Unlike typical water damage from a leaky roof or a burst pipe, flood damage often includes raw sewage that can complicate the remediation process.  As soon as flooding occurs in your home, make sure to call a flood damage cleanup expert to mitigate the damage and safely remove the flood water.

Clean water that originated from a source that does not pose substantial harm to humans. Examples include: broken water supply lines, melting ice or snow, falling rainwater, broken toilet tanks, and toilet bowls that do not contain contaminants or additives. Clean water may deteriorate with time as it dissolves or mixes with soils and other contaminants.

Though not the most common precipitator of water damage repair in the NH, storm flooding can cause serious short term and long-term problems to your residential or commercial property. The likelihood of flood-water damage to your property is rising, and property owners need to be prepared to deal with this very real possibility.  Flooding from seasonal storms is more common than you’d think, and the problems that arise from it need to be addressed as quickly as possible.
Alameda, Antioch, Berkeley, Burlingame, Campbell, Concord, Daly City, Danville, Fremont, Foster City, Hayward, Hillsborough, Los Gatos, Los Altos, Menlo Park, Monterey, Morgan Hill, Mountain View, Oakland, Palo Alto, Piedmont, Pleasanton, Pacifica, Redwood City, Richmond, San Carlos, San Francisco, San Jose, San Leandro, San Mateo, San Ramon, Santa Clara, Santa Cruz, South San Francisco, Saratoga, Walnut Creek

Dalworth Restoration Crews are certified through the IICRC and receive specialized training at our Dallas/Fort Worth Restoration Facility. Our technicians are trained to professionally perform water damage restoration services according to the best practices and ANSI/IICRC S500 standards. Technicians are available 24/7 for emergency water removal, cleanup and content repair, as well as rebuild and restore your water or flood damaged property to pre-loss condition.
The longer water damage sits untreated, the more likely it is that additional damage can occur. If it’s determined that drying equipment is needed, dehumidifiers will often be placed in the home to prevent against further damage like mold growth while the vendor is waiting for approval from the insurance company, if one is involved. Dehumidifiers can be present for one or multiple nights depending on factors such as the length of time the water has been present and the source of the leak. The contractor working on your home will be able to assess how long the dehumidifiers are needed.
At 1-800 WATER DAMAGE, our mission is simple – provide the ultimate customer experience. Each one of our team members is passionate about what they do and it shows in the quality of our work. Our services go beyond water damage restoration to include mold remediation, professional carpet cleaning, fire/smoke restoration, sewage cleanup, and much more.
Porous materials include carpet, insulation, fabric, and similar items. If they’ve been soaked in water, you may have to cut them out and throw them away. Water will permanently damage most porous materials by shrinking or warping them, and mildew will damage them even further. And if you have a beloved piece of furniture you want to save, you could try isolating and drying it out, but the damage may already be done, especially if you see drywall water damage. Note that unsealed cement, drywall, and wood are also porous materials.

If your water bill is unusually high, that might be an indication of an undetected leak. Buying a water leak sensor that sends alerts to your phone is one way to safeguard your home. You should also check around your toilets, tubs, showers and sinks for any soft spots or moisture. Keep an eye out for loose tiles as well. If you have a dishwasher or a refrigerator with a water line, look for warped or discolored floorboards.


The insurance company will pay to repair your home with materials of like kind and quality to the original. For example, if the carpet was damaged, the insurance company will pay to replace the damaged carpet with carpet of a similar grade and quality. If you choose to upgrade the carpet or change the type of flooring, you will have to pay the extra costs yourself.
Almost every home gets mold infestations. The trick is to mold remediation is to get to them before they get big and harm both you and your home. In this article, you’ll learn about mold remediation and how to get rid of mold, how to get rid of black mold and what kills mold. We’ll show you how to identify mold, how to eliminate the small infestations as well as the big ones that have gotten out of hand and how to clean mold. We’ll also answer the question: Does bleach kill mold?
Roofs should be inspected annually. A professional roof contractor can look for exterior and interior warning signs that your roof’s condition may lead to water damage, including cracked or missing shingles and areas where water is prone to pool. An inspection can cost several hundred dollars, but in exchange for your peace of mind, it’s priceless.
Wear a respirator or a facemask rated for black mold spore protection, and cover arms, legs and hands to avoid contact with mold spores. Use soap and a sponge to remove visible mold. If the moldy area is dry, lightly spray with water, as this will reduce the incidence of airborne mold spores during cleaning. Next, use commercial black mold removal products, which can be found in most hardware or home repair stores, to disinfect the moldy areas, in addition to any adjacent areas. If you use bleach, make sure it won't discolor the material or surface. Place all sponges, equipment and other materials used in cleaning in a heavy duty garbage bag, and if possible, remove the bag through an nearby exit as opposed to the main house, to avoid distributing mold spores.
If you repair damage resulting from an appliance-related leak, you need to get a Certificate of Appliance-Related Water Damage Remediation (WDR-1). The certificate verifies that the damage was properly replaced or repaired and that any related physical damage was properly remediated, repaired, or replaced. If you don't have the repairs or remediation certified by a WDR-1, an insurance company can deny you coverage in the future based on previous appliance-related damage or claims.
Believe it or not, there are three types of water. The first type is “clean” water from rain, condensation, leaky pipes, and so on. It’s relatively harmless to clean it up yourself. But if you decide to seek outside help, it costs around $3.75 per square foot for basic water damage cleanup (replacements not included). The second type is gray water, slightly dirty water from dishwashers, washing machines, clean toilets, and so on. And it may have some contaminants. But you can clean it up yourself if you remove it carefully and with proper safety gear to protect yourself. Professional water damage cleanup cost rises to $4.50 per square foot.
Roofs. Keep roofs free of debris that can damage roofing and allow water to seep in. Trim tree branches to prevent them from rubbing and damaging the roof. Repair missing or damaged shingles. Properly seal any cracks around chimneys, skylights, and vents. Check metal flashing for holes, cracks, or other damage. Replace flashing or use silicone caulk to seal any openings.
After a sketch is made of the piece of equipment, add the equipment to a detailed electrical equipment tracking sheet, which should include general information such as the item number, sequence number, priority, area of the plant, power center or room number, transformer, substation, cell position, equipment type, circuit identification, plant identification number, manufacturer, percent water level, model number, frame size, and voltage. After completing these procedures on all the equipment associated with a power center or a piece of gear, the QA/QC leader must review the documentation for accuracy. Once the documentation has been approved, the equipment is ready for removal.
Ceilings exposed to water damage are more at risk due to gravity: You don’t want them sagging or collapsing. So, remove affected ceiling panels or boards first. If the ceiling leak is caused by a roof problem, it’s important to find the true source of the leak, which may be somewhere far removed from the water stain. And take this time to make sure the water caused no structural damage to beams or rafters. You can contact professionals to find out what replacing a water damaged ceiling repair cost job runs.
For more than 10 years, homeowners all around the Dallas and Ft Worth area have called on us for immediate assistance with water restoration services for flooding and water emergencies. We have the resources and experience to deal with any kind of water situation quickly and efficiently. When your home or business has had a flood, you really don’t want to leave a voice mail for someone to call you back during “normal business hours.” Water damage doesn’t care what time it is, and neither do we. We are available 24/7 to take care of your water problem now.

When water invades your home, it can be an overwhelming and stressful experience. When this happens, the best course of action you can take is to call a restoration company, such as Mr. Restore, immediately. As soon as we arrive on your property, our team can find the source of the problem, stop the water from coming in, and proceed with the water removal process. If you wait on contacting us, secondary water damage can occur, and mold formation could potentially begin. Our crew thoroughly dries any surfaces that have incurred water damage, such as wood, drywall and paneling.
The longer water damage sits untreated, the more likely it is that additional damage can occur. If it’s determined that drying equipment is needed, dehumidifiers will often be placed in the home to prevent against further damage like mold growth while the vendor is waiting for approval from the insurance company, if one is involved. Dehumidifiers can be present for one or multiple nights depending on factors such as the length of time the water has been present and the source of the leak. The contractor working on your home will be able to assess how long the dehumidifiers are needed.
Our flood damage repair experts have the necessary training and equipment to properly remove flood water and sewage that may contain harmful bacteria and fecal matter.  We are available 24 hours a day, 7 days a week to react quickly to flood damage emergencies and help mitigate the damage before beginning the restoration process.  Our specific flood damage restoration services include:

Once you’ve pulled away wet materials and established holes or cuts in the wall as needed, you’ll typically need one air mover for every 15 – 25 square feet of floor, unless the moisture load and density is particularly high, then you may need more. To prevent mold, make sure all of the layers and materials are dry before putting everything back together.
×