When industrial facilities are faced with such a catastrophic event, specific and detailed steps must be taken to return the facility to productive operation. In the wake of this type of natural disaster, it's especially critical to analyze and repair the electrical power system in a safe and logical sequence (see SIDEBAR: Temporary and Emergency Power). Following is an overview of how to approach recovery operations of electrical equipment after a flood.

The biggest issue with the mold removal is whether you want a quick fix or to really repair all the problems that have created this problem. Moisture, bad windows, drainage system in basement, sump pump, outside grading of ground surrounding your house, window wells. The challenge is affording everything all at one time, The basement is the life of a house
From wet carpets to swollen floorboards, it’s often evident when water has damaged your floor. But if you aren’t sure, it’s important to check immediately in case moisture has become trapped underneath. Note that underlayment and padding are particularly susceptible to water damage and must usually be removed. However, this also presents an opportunity to install new, waterproof flooring in the area. Ceramic tile, high-end vinyl and certain engineered wood materials can all help protect floors against future water damage repair.
On average, it costs around $2,300 for mold removal. Mold spores are found in almost all environments and begin growing in just 24 to 48 hours when moisture is present. All types of water damage come with a risk of fungal growth. The longer moisture sits, the greater the risk and cost of removal. Only a qualified inspector should test for mold. An inspector can help determine if there is any and if professional remediation is needed.
Black water contains pathogenic agents and is grossly unsanitary. Anyone with a compromised immune system, respiratory problems, or allergies, as well as young children and the elderly must remain off the job site until the building is judged safe for occupancy. Black water includes sewage and other contaminated water sources entering or affecting the indoor environment, such as: toilet backflows, flooding from seawater, ground surface water, and rising river water. Category 3 water can contain contaminants such as pesticides, heavy metals, or toxic substances.
The average homeowner spends $7.00 per square foot for professional cleanup. That does not include the amounts for repairing and replacing items. Typically, anything that can absorb the contaminants in black water should be replaced, including upholstered furniture, beds, carpets, clothing, and all permeable building materials. Replacement is often more cost effective than restoration.
The information and advice contained in this article is intended as a general guide for informational purposes only. It does not take into account your personal situation. While we at Resolve have significant experience and history operating in the home restoration industry and working closely with construction contractors, we are not licensed as a general or specialty contractor. We encourage you to consider the information we’ve provided but urge you not to rely upon it in place of appropriate professional advice from a licensed, experienced construction contractor.    
Expert Rytech technicians will apply state-of-the-art drying process techniques to your property and issue a full written report to Olympus upon completion. Rytech gives you the added security and assurance of specialists who carry visible identification, arrive in clearly marked Rytech vehicles, and wear protective footwear to avoid soiling undamaged areas of your property.
Assessing the severity of the damage is important for determining what is needed to start water damage repair and water removal. There are several different categories assigned to water damage. Category 1 refers to clean water, or water that does not pose a threat to humans. Possible causes of this type of damage include broken appliances or sink overflows. Category 2 water is also called gray water. This means that the water is contaminated and may cause sickness of ingested. This type of water contains microorganisms. Broken toilets, broken sump pumps, and seepage may cause category 2 water damage. Category 3 water is known as black water. This type of water is unsanitary, as it contains bacteria and other organisms that cause sickness. The possible sources of black water damage include sewage problems and contamination of standing water.

When you’re sure the mold has been eliminated, seal the wood surfaces with pigmented shellac like BIN or an oil-based primer like KILZ. Repaint cleaned wall surfaces with a regular latex paint that contains a mildewcide to help stop future mold growth. Then install new insulation and drywall and nail the trim back on. And keep in mind that if the moisture returns, mold will return.
When industrial facilities are faced with such a catastrophic event, specific and detailed steps must be taken to return the facility to productive operation. In the wake of this type of natural disaster, it's especially critical to analyze and repair the electrical power system in a safe and logical sequence (see SIDEBAR: Temporary and Emergency Power). Following is an overview of how to approach recovery operations of electrical equipment after a flood.

When the next water damage call comes in for a flood cleanup due to a broken water pipe or drain backup, make sure you have all the commercial restoration equipment on hand that you need to tackle the job in a moment’s notice. Events like floods, hurricanes, wildfires and other natural disasters can leave homes and businesses in peril and in need of professional restoration services.

×