Sewage back‐ups, pipe leaks and breaks not only cause sewage damage, but result in dangerous conditions that require meticulous cleanup to ensure a return to a safe environment. That’s why WaterBear leads in industry standard guidelines and takes every precaution to contain contamination within exposed areas, then thoroughly cleans and decontaminates them. We work to return the areas to their original state – fresh, clean and safe.
Repairing mold-damaged drywall is not difficult, but correcting the cause of the mold can often be challenging. Roof leaks, an improperly installed vapor barrier, leaky pipes, or constant contact with water from sinks, tubs, and showers can cause mold damage. Mold happens whenever moisture is constantly present. Mold spores attach to the paper facing of the drywall, the paper becomes a food source, and the mold colony propagates and grows. Long-term exposure to mold spores can be harmful, especially if a person is allergic to mold. You should consider consulting a mold removal specialist to determine the type of mold that is present, and you should always wear a face mask and gloves when working with mold.

Accurate mold and tooling component assembly is a critical step in mold repair—and is the origin of many preventable, unscheduled mold stops (breakdowns). Poor workmanship and mistakes are usually a result of too much speed, lack of focus or physical skills, and disorganized work habits. If several repair techs are involved in the assembly of a mold, communication breakdowns between them can require the mold to be disassembled yet again to correct an oversight or install something that was forgotten.
The insurance company must start investigating your claim within 15 days after receiving written notice and may ask you for more information. Once you send the information, the insurance company has 15 business days to accept or reject your claim. If the insurance company says it will pay your claim, it must pay within five business days. If the insurance company rejects your claim, it must explain its reasons in writing.
Most of us are very familiar with lockout/tagout procedures, test-before-touch practices, and applying safety grounds. While these are key safety aspects of putting equipment into an electrically safe condition, there are other safety items that need to be addressed when working in a natural disaster area. Items such as air quality, structural issues, and chemical spill exposure come into play. It is the responsibility of each company to keep its own people safe and supply them with special personal protective equipment (PPE), such as rubber boots, respirators, dust masks, portable gas monitors, and rubber gloves. As a service company, you must also coordinate with plant safety personnel you've contracted with to develop special safety procedures to address the ever-changing site conditions. Frequent safety meetings are a must to keep everyone up to date with the most current hazard conditions on the site.
Water is pumped out of your home or property to our recovery tank mounted inside our truck, ready for proper disposal. Standing water is removed, allowing our water extraction team inside your property to assess damage to all structures, furniture, and personal items, inspect your property to traces of mold, and to set up equipment designed to quickly dry the property.
When a severe thunderstorm hits, the risk for property damage increases greatly as heavy rains can cause water damage as well as flooding in your home.  Flooding from storms is a major problem that requires a combination of methods to correctly treat it and protect your health.  Unlike typical water damage from a leaky roof or a burst pipe, flood damage often includes raw sewage that can complicate the remediation process.  As soon as flooding occurs in your home, make sure to call a flood damage cleanup expert to mitigate the damage and safely remove the flood water.
Regular cleaning may maintain household furniture’s upkeep but with Dallas Water Damage’s advanced cleaning technology, our technicians can fully restore your furniture in their brand new state while keeping them free from bacteria and viruses that may cause common health problems. Our competitive pricing options vary depending on your water damage and professional cleaning needs. You may call our 24 hour emergency call-in service for a free estimate today.
The European-American community was founded by David Hill, Isaiah Kelsey, and Richard Williams, who arrived in the Tualatin Valley in 1841, followed by six more pioneers in 1842. The locality went by two other names—East Tualatin Plains and Columbia—before it was named “Hillsborough” in February 1850 in honor of Hill, when he sold part of his land claim to the county.
If you can already see it, you usually do NOT need to spend money on pre-testing mold. Plain and simple: you just need to remove it. Since no visible mold growth belongs in a healthy home (no matter what the type) and all mold should be removed the same way, there is usually no need to identify what types and concentrations of mold you have via testing.
Hillsboro homes that are left vacant with no regulating of heat or poorly insulated walls can be a common culprit of frozen water pipes and frozen water lines in the winter time. These breaks can be hard to notice immediately because they commonly occur in the basement. Broken pipes can also be common cause of water damage, causing gallons of water to come flooding through your living rooms, bedrooms, kitchen and bathroom. Water pipe bursts are common in areas of extreme winter cold and high winds that drive the wind chill well below freezing temperatures. Pipes that lack proper insulation and are exposed to the winter’s cold are far more likely to create a need for restoration.

Our plumbing and water damage restoration experts are well-trained and knowledgeable in handling a water damage emergency whenever the situation strikes. Our trained professionals receive the Institute of Inspection, Cleaning and Restoration Certification (IICRC) and they’ll always perform emergency water damage services in compliance with the highest standards for professional water damage restoration. Roto-Rooter’s vehicles are fully equipped with state-of-the art water extraction, drying and moisture testing equipment to handle everything including:

While you have no control over natural water-related disasters, you can take all the preventative measures possible ahead of time to minimize their effect on your home. Flash floods, sudden storms and hurricanes can all trigger water buildup. Prompt attention by contacting The Water Damage Experts as soon as you can after a weather-related issue will help lessen the time for water damage to occur.
Water is pumped out of your home or property to our recovery tank mounted inside our truck, ready for proper disposal. Standing water is removed, allowing our water extraction team inside your property to assess damage to all structures, furniture, and personal items, inspect your property to traces of mold, and to set up equipment designed to quickly dry the property.
We offer structural drying, as after the immediate water emergency has been resolved with damage restoration, your house and its contents still need to be thoroughly dried out. We have specialized equipment that is able to get this done in as short a time as possible, and with minimal disruption. Our commercial-grade water extractors will get your carpet and other flooring back to nearly 100% dry condition. We also use high-speed blowers to circulate air at high volumes throughout the house in order to facilitate the drying process.
Inspect damaged materials for mold and mildew. Mold can start to grow in the right conditions in as little as 24 hours. For long-term issues, like mold caused by attic condensation, the mold may have started growing a long time ago. And if you find mold and mildew issues, you need to be very careful. Some mold is toxic to humans, and all mold is very damaging to the materials it infests. For small mold issues, cut out the material, bag it, and throw it away immediately. For serious mold issues, get out of the area, shut down any airflow (to avoid spore contamination) and call a professional. And keep in mind that mold can show up in hidden areas like inside walls or under floors, so this inspection and water damage repair will be ongoing.
Molds can also produce mycotoxins, which are toxic substances found either within or on the surface of spores. They can enter a person's system via ingestion, inhalation or skin contact. Aflatoxin B1 is the best-known mycotoxin. It is a potent carcinogen and inhaling it can cause lung cancer. The fungi Aspergillus parasiticus and Aspergillus flavus produce this carcinogen.
Category 3 Water - Known as "black water" and is grossly unsanitary. This water contains unsanitary agents, harmful bacteria and fungi, causing severe discomfort or sickness. Type 3 category are contaminated water sources that affect the indoor environment. This category includes water sources from sewage, seawater, rising water from rivers or streams, ground surface water or standing water. Category 2 Water or Grey Water that is not promptly removed from the structure and or have remained stagnant may be re classified as Category 3 Water. Toilet back flows that originates from beyond the toilet trap is considered black water contamination regardless of visible content or color.[6]
×